Himachal

Technical Eval

Works

Civil Works

Augumentation of LWSS Pujyal Busal in Tehsil Nadaun Distt Hamirpur HP

HP Irrigation and Public Health

Nadaun | Hamirpur, Himachal Pradesh

Amount: ₹4.6 LCloses: 11 Sept 2026Closed

Timeline

Published3 Sept 2026
Closed11 Sept 2026
Technical Evaluation25 Sept 2026
Award—

Bids

3 Bids25 Sept 2026

#	Company	Status
1	Ashwani Kumar Accepted-Technical R O VILL GARH P O BARRAM TEHSIL JAISINGHPUR DISTT KANGRA H P \| KANGRA \| HIMACHAL PRADESH \| 175013	Accepted-Technical accepted
2	M/S ASHWANI ELECTRICAL WAORKS Accepted-Technical VPO KANGOO TEHSIL NADAUN DISTT HAMIRPUR	Accepted-Technical accepted
3	Sandeep Chauhan Accepted-Technical HOUSE NO 114 WARD NO 1 KRISHNA NAGAR TEH AND DISTT HAMIRPUR H P	Accepted-Technical accepted

Tender Value

₹4.6 L

EMD Value

₹9,194

Closing Date

11 Sept 2026, 11:00 amClosed

Tender Inviting Organisation

Name

Address

JSV Division Nadaun

Work Description

Augumentation of LWSS Pujyal Busal in Tehsil Nadaun Distt Hamirpur HP

Tender Information

Tender ID

2026_HPIPH_142748_1

Reference Number

JS-NDN-CB-Misc.Agr/2026-27/-

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

90 days

Location

Nadaun

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Construction of Pump House Room Size 4.00x3.00 mtr

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredEnlistment (.pdf)

RequiredAuthorization letter of DSC (.pdf)

RequiredCost of tender form (.pdf)

RequiredITAX EPF GST PAN registration (.pdf)

RequiredEarnest Money (.pdf)

RequiredUndertaking (.pdf)

RequiredWork done certificate (.pdf)

Finance

RequiredSchedule of quantity (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

Tender Fee Payable To

EE Nadaun

EMD Fee Amount

₹9,194

Important Dates

Last Activity

25 Sept 2026

Published

3 Sept 2026

Bid Opening

11 Sept 2026

Download Starts

3 Sept 2026

Download Ends

11 Sept 2026

Submission Starts

3 Sept 2026

Clarification Period

3 Sept 2026 - 11 Sept 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (31 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited)saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.	12.09	Cum.	1.25	₹15.11
2	Providing and laying cement concrete 1:6:12(Icement:6sand: 12 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.	2.59	Cum.	1.25	₹3.24
3	Brick work using common brunt clay building bricks (1st lass) in Foundation Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts.	6.94	Cum.	1.25	₹8.68
4	Brick work using common brunt clay building bricks (1st lass) in super structure above Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts.	9.38	Cum.	1.25	₹11.73
5	Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partions frames IN ALL leads and lifts	-	-	-	-
6	For door and window Frames.	65.92	Kg	1.25	₹82.4
7	For door and window Shutter	58.91	Kg	1.25	₹73.64
8	Providing and fixing glazing in aluminium door, window, ventilator shutters and 4.04 partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. in all leads and lifts.	4.04	Sqm	1.25	₹5.05
9	Providing and fixing fly proof wire gauze to window clerestory window & dorrs 6.48 with M.S. Flat 15x3 mm and nuts & bolts complete.	6.48	Sqm	1.25	₹8.1
10	Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.17 MB

Work Item Documents

form6.pdf

Tender Documents • 0.36 MB

BOQ_212049.xls

BOQ • 0.30 MB

form8online.pdf

Tender Documents • 1.12 MB

Termsandconditions.pdf

Tender Documents • 0.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Ashwani Kumar

Accepted-Technical

R O VILL GARH P O BARRAM TEHSIL JAISINGHPUR DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013

M/S ASHWANI ELECTRICAL WAORKS

Accepted-Technical

VPO KANGOO TEHSIL NADAUN DISTT HAMIRPUR

Sandeep Chauhan

Accepted-Technical

HOUSE NO 114 WARD NO 1 KRISHNA NAGAR TEH AND DISTT HAMIRPUR H P

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited)saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposting of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.

12.09

Cum.

1.25

₹15.11

Providing and laying cement concrete 1:6:12(Icement:6sand: 12 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

2.59

Cum.

1.25

₹3.24

Brick work using common brunt clay building bricks (1st lass) in Foundation Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts.

6.94

Cum.

1.25

₹8.68

Brick work using common brunt clay building bricks (1st lass) in super structure above Plinth level upto floor two level in cement mortar 1:6(1Cement:6 Sand)in all leads and lifts.

9.38

Cum.

1.25

₹11.73

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partions frames IN ALL leads and lifts

For door and window Frames.

65.92

1.25

₹82.4

For door and window Shutter

58.91

1.25

₹73.64

Providing and fixing glazing in aluminium door, window, ventilator shutters and 4.04 partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. in all leads and lifts.

4.04

Sqm

1.25

₹5.05

Providing and fixing fly proof wire gauze to window clerestory window & dorrs 6.48 with M.S. Flat 15x3 mm and nuts & bolts complete.

6.48

Sqm

1.25

₹8.1

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.