Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAccepted-AOC | ₹2.4 Cr | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹2.4 Cr+₹3.9 L (1.64%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | ₹2.4 Cr+₹3.9 L (1.64%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹2.9 Cr+₹47.8 L (20.0%)Rejected-Finance B 87 SHAM NAGAR KHAYALA ROAD NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | ₹2.9 Cr+₹47.8 L (20.0%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹2.9 Cr+₹48.3 L (20.1%)Rejected-Finance | ₹2.9 Cr+₹48.3 L (20.1%) | L4 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | New Era Engineers L3 | M/S SANJAY KUMAR YADAV L1 | B.K.ASSOCIATES L4 | KULWANT SINGH L2 |
|---|---|---|---|---|---|---|---|
| 2.00SCHEDULE "A" : | |||||||
| 3.00 | Item No 01 : Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and getting out as in hard/dense soil complete all as specified and directed. | 7,100 | Cum | 175 ₹12,42,500 | 150 ₹10,65,000 | 300 ₹21,30,000 | 90 ₹6,39,000 Lowest |
| 4.00 | Item No 02 : Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and directed. | 6,500 | Cum | 40 ₹2,60,000 Lowest | 60 ₹3,90,000 | 100 ₹6,50,000 | 40 ₹2,60,000 Lowest |
| 5.00 | Item No 03 : Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. | 800 | Cum | 60 ₹48,000 | 100 ₹80,000 | 300 ₹2,40,000 | 40 ₹32,000 Lowest |
| 6.00 | Item No 04 : Supply, laying, jointing and testing of ductile iron pressure pipe with socket & spigot ends having ISI stamping marking confirming to IS:8329/2000 in standard length of 5.50 - 6.00 meter of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 100 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.
Note: (i) Cutting of pipe shall be measured and paid for separately
(ii) Excavation earth works shall be measured and paid for separately.
(iii) DI fittings & tyton rings shall be measured and paid for separately. | 7,900 | RM | 1,950 ₹1,54,05,000 | 1,650 ₹1,30,35,000 Lowest | 1,830 ₹1,44,57,000 | 1,700 ₹1,34,30,000 |
| 7.00 | Item No 05 : M & L for Ductille iron fitting upto 100 mm dia for Bends,Tee pieces single branch. "Y" junction, double branch, cross collars, caps and plugs complete all as specified and directed. | 1,020 | KG | 250 ₹2,55,000 | 300 ₹3,06,000 | 200 ₹2,04,000 | 140 ₹1,42,800 Lowest |
| 8.00 | Item No 06 : S&F cast iron sluice valve of size 100mm bore, class PN 1.6 heavy duty flanged ends with brass spindle, cast iron wheel for operation confirming to IS:14846:2000 including flanged joint on both side with rubber gasket, nut, bolts and washer complete. | 28 | Each | 15,500 ₹4,34,000 | 9,500 ₹2,66,000 Lowest | 12,000 ₹3,36,000 | 12,500 ₹3,50,000 |
| 9.00 | Item No 07 : S&F cast iron non return valve of size 100 mm bore heavy duty flanged end confirming to IS-5312 including flanged joint on both ends with rubber gasket, nut, bolts and washer complete. | 18 | Each | 13,500 ₹2,43,000 | 8,000 ₹1,44,000 Lowest | 8,000 ₹1,44,000 Lowest | 10,500 ₹1,89,000 |
| 10.00 | Item No 08 : S&F mild steel pipe conforming to IS 1239 Part-I of 2004, 100mm bore flanged type class 'B' including fabrication and bends fitting of required size at pump house and synthetic enamel painting two coat complete including pipe holding clamps with UG sump all as specified and as directed. | 120 | RM | 1,450 ₹1,74,000 Lowest | 2,800 ₹3,36,000 | 1,500 ₹1,80,000 | 1,500 ₹1,80,000 |
| 11.00 | Item No 09 : Supply and fix PN 1.6 ductile iron Air release Valve with single air Outlets, tamper proof double orifice, with stainlewss steel floats in RL blue epoxy coating conforming to IS 14845 of size 100 mm dia bore and fixing up in ductile Iron Water supply mains of size 100 mm dia complete all as specified and directed | 6 | Each | 15,000 ₹90,000 | 20,000 ₹1,20,000 | 25,000 ₹1,50,000 | 12,500 ₹75,000 Lowest |
Tender Value
₹3.3 Cr
EMD Value
₹4.1 L
Closing Date
23 Dec 2025, 6:00 pmClosed
Chief Engineer Jabalpur Zone
HQ Chief Engineer Jabalpur Zone Ridge Road Jabalpur Cantt 482001
PROVN OF DISTRIBUTION AND UTILIZATION OF TREATED WATER FROM STP AT MIL STN GAYA
2025_MES_739562_1
753016A PROVN OF DISTRIBUTION AND UTILIZATION OF TREATED WATER FROM STP AT MIL STN GAYA
Open Tender
Civil Works
Item Rate
365 days
GAYA
AS PER NIT
8 documents required · 8 mandatory
₹2,000
GE GAYA
₹4.1 L
Yes
11 Feb 2026
25 Nov 2025
30 Dec 2025
25 Nov 2025
23 Dec 2025
16 Dec 2025
Amount
SCHEDULE "A" :
Item No 01 : Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and getting out as in hard/dense soil complete all as specified and directed.
Item No 02 : Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and directed.
Item No 03 : Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Item No 04 : Supply, laying, jointing and testing of ductile iron pressure pipe with socket & spigot ends having ISI stamping marking confirming to IS:8329/2000 in standard length of 5.50 - 6.00 meter of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 100 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed. Note: (i) Cutting of pipe shall be measured and paid for separately (ii) Excavation earth works shall be measured and paid for separately. (iii) DI fittings & tyton rings shall be measured and paid for separately.
Item No 05 : M & L for Ductille iron fitting upto 100 mm dia for Bends,Tee pieces single branch. "Y" junction, double branch, cross collars, caps and plugs complete all as specified and directed.
Item No 06 : S&F cast iron sluice valve of size 100mm bore, class PN 1.6 heavy duty flanged ends with brass spindle, cast iron wheel for operation confirming to IS:14846:2000 including flanged joint on both side with rubber gasket, nut, bolts and washer complete.
Item No 07 : S&F cast iron non return valve of size 100 mm bore heavy duty flanged end confirming to IS-5312 including flanged joint on both ends with rubber gasket, nut, bolts and washer complete.
Item No 08 : S&F mild steel pipe conforming to IS 1239 Part-I of 2004, 100mm bore flanged type class 'B' including fabrication and bends fitting of required size at pump house and synthetic enamel painting two coat complete including pipe holding clamps with UG sump all as specified and as directed.
Item No 09 : Supply and fix PN 1.6 ductile iron Air release Valve with single air Outlets, tamper proof double orifice, with stainlewss steel floats in RL blue epoxy coating conforming to IS 14845 of size 100 mm dia bore and fixing up in ductile Iron Water supply mains of size 100 mm dia complete all as specified and directed
Item No 10 : Supply and lay 3-layer PP-R (Polypropylene Random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete outer dia 20 mm wall thickness of pipes as per IS:15801 including all fittings complete all as specified and directed.
Item No 11 : All as per item No. 10 above but of outer dia 50mm
Item No 12 : S&F PP-R Gate valves (brass insert) suitable for 20 mm outer dia of pipe screwed both side ends for 3 layer PP-R pipe complete all as specified and directed
Item No 13 : All as per item No. 12 above but of outer dia 50mm
Item No 14 : M & L Making connection of PP-R distribution branch with PP-R main of sizes UPTO 40 MM by providing and fixing tee including cutting and making fusion joint etc.
Item No 15 : All as per item no 14 above but of size 50mm to 75mm
Item No 16 : Supply and laying in trenches dry well burnt locally available sub class “B” bricks designation 75 over sand cushioning for protection of cable complete all as per specified and directed.
Item No 17 : Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed. NOTE: Punned thickness 18 cm shall be measured for payment
Item No 18 : M&L construction of valve pit chamberincluding necessary excavation, earth work, PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0 mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
(a) 900 mm x 900 mm x 900 mm
(b) 600 mm x 600 mm x 600 mm
(c) 450 mm x 450 mm x 450 mm
Item No 19 : S&F XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade of szie 25 Sqmm x 4 Core laid in trench/duct/drawn through GI pipe/road crossing/fixed to wall with clamp including connection using aluminium thimble, cable gland complete all as specified and directed.
Item No 20 : Supply, installation, commissioning and testing of LT Feeder Pillar, outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, fabricated out of 3.15mm thick, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-1, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS-8623 duly powder coated for 415 Volts, 3 phase, 4 wire having three phase and neutral aluminium bus bars suitable of capacity 200 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of aluminium lugs/gland complete al as specified and directed. Note: Panel drawing shall be got approved by contractor from GE before fabrication.
INCOMING: MCCB 100 Amps, 4 pole, 16 KA breaking capacity - 01 Nos
OUTGOING : (i) MCCB 32 Amps, 3 pole, 10 KA breaking capacity - 01 Nos
(ii) MCB DP 16 Amps - 01 Nos (iii) RYB phase indication lamp - 01 set.
(vi) Automatic star delta starter suitable for 05HP submersible pump with contactor, relays, phase corrector and phase preventer - 01 Nos.
Item No 21 : S&F flat copper cable of size 6 sqmm 3 Core PVC insulated and PVC sheathed, 1100 volts grade conforming to and marked with IS:694:1990 including connection with proper size copper thimble complete all as specified and directed.
Item No 22 : Supply, installation, testing and commissioning of horizontal openwell submersible monobloc pump set, electric driven, 3 phase AC, 415 volts of motor rating 5 hp capacity, pump having discharge of 833 LPM at 18 mtr head including lowering into UG sump and making all electric and water connections complete all as specified and directed.
Item No 23 : M&L for earthing of machinery/equipment installed at power house/substation, Galvanised steel earth plate electrode 600x600x6mm thick,buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level,connected to galvanised earth strip 32 x 6 mm by means of bolts nuts,check nuts,and washersof galvenised or steel all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion using 32 x 6mm GI strip complete all as specified and directed
Item No 24 : Supply and fixing and replacement GI pipe, light grade 40 mm bore, ISI Marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified.
Item No 25 : M & L for laying of HDPE double wall corrugated pipes in trench for UG cable protection conforming to IS-14930 Part-II with IP-67 having outer dia 50 mm and inner dia of 32 mm complete all as specified and directed.
Item No 26 : S & F, Framed work such as grills ,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars,barred iron framed balusters ,walk ways,railings, frame workof water tanks and similar work comfirming to fe.290.gde-E-165 dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles iron spider grill cover with steel frame around full covering of static water tank of size 50000 ltr including fabrication, painting 2 coat enamel , for prevention of animals are childrens falling all as specified and directed
Item No 27 : M & L for cutting and tapping DI in position for inserting of new tees branches etc upto100 mm bore of pipe complete including fitting for connection ,all as specified and directed.
Item No 28 : Labour only road cutting where necessary for pipe laying and cable crossing complete all as specified and directed
Item No 29 : M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for to support the pipe line etc, including necessary form work, filling the road cutting for pipe laying where neccessarycomplete all as specified and directed.
Item No 30 : Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate and finial taper plug,bolts,nut and screw including the two coat of alumunium paint over a coat of red oxide steel primer including preparation of surface complete all as specified and as directed.
Item No 31 : Supply and fix LED street light fitting 70 W lumen efficacy not less than 140 lumen/ watt 230 V AC outdoor type with high pressure die cast aluminiun hosing and heat resistant complete with driver , lamp bracket with impact and corroson resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Item No 32 : S & F PVC Junction box of innner size 230mm x 170mmm x 105 mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for phase & neutral, insulated with insulators, including colour coding and 01 Nos MCB 06 Amps complete all as specified and directed.
Item No 33 : Construction of RCC static water tank of capacity 50000ltr complete all as specified(NOTE: The drawing of the static water tank is enclosed. Please refer to the list of drawings)
Item No 34 : S&F STP water line route indicator made up of cement concrete reinforced of size 60 mm X 30mm X 10mm engraved STP water in black on red synthetic enameled colour fixed on ground including excavation & PCC work complete all as directed.
Item No 35 : S&F of water level controller with float switch suitable for 5HP monoblock openwell pump for automatic ON/OFF operation, including connected 2 core pvc insulated multistranded copper cable, including connected with DOL starter in LT panel completeall as specified and directed
KULWANT SINGH (BID ID -3506128)
New Era Engineers (BID ID -3509012)
B.K.ASSOCIATES (BID ID -3500243)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.82 MB
TENDER.pdf
Tender Documents • 4.05 MB
BOQ_830246.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .