Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC RZ H 5 NANDA BLOCK MAHAVIR ENCLAVE PART 1 PAL AM SOUTH WEST DELHI DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.6 L+₹9.8 L (29.0%)Rejected-Finance | L2 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | shakti construction L2 | SM CONSTRUCTION COMPANY L1 |
|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of MOD land complete all as specified and directed. | 1,400 | Sqm | 10 ₹14,000 | 2 ₹2,800 Lowest |
| 2.00 | M&L for plastering 12 mm thick cement mortar 1:6, on unven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed | 400 | Sqm | 110 ₹44,000 | 70 ₹28,000 Lowest |
| 3.00 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and directed | 300 | Sqm | 110 ₹33,000 | 70 ₹21,000 Lowest |
| 4.00 | M&L for plastering 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed | 700 | Sqm | 110 ₹77,000 | 70 ₹49,000 Lowest |
| 5.00 | M & L preparation of newly plastered or unplastered surface and applying two coats of oil bound distemper on walls complete all as specified and directed | 400 | Sqm | 20 ₹8,000 | 15 ₹6,000 Lowest |
| 6.00 | M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed | 300 | Sqm | 20 ₹6,000 | 5 ₹1,500 Lowest |
| 7.00 | M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge. | 700 | Sqm | 40 ₹28,000 | 12 ₹8,400 Lowest |
| 8.00 | M&L for complete removal of existing treatment under (Weather coat/OBD/Oil paint/ white wash/Cement base paint etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and directed. | 19,495 | Sqm | 10 ₹1,94,950 | 2 ₹38,990 Lowest |
| 9.00 | M&L for waterproof cement based putty @ 1KG (undiluted) per square meter of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :-
Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute
Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI
Step 3 :- Allow 6-8 Hrs time to dry the putty surface. | 15,250 | Sqm | 20 ₹3,05,000 | 10 ₹1,52,500 Lowest |
| 10.00 | M&L for applying two coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. | 3,250 | Sqm | 40 ₹1,30,000 | 15 ₹48,750 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SUBROTO PARK
GE (AF) Subroto Park, Delhi Cantt Delhi-110010
As described in Bill of quantities
2025_MES_717420_1
GE/SP/TOKEN-16/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SUBROTO PARK
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE (AF) SUBROTO PARK
₹80,000
Yes
29 Sept 2025
28 Jun 2025
29 Jul 2025
28 Jun 2025
26 Jul 2025
14 Jul 2025
Amount
Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of MOD land complete all as specified and directed.
M&L for plastering 12 mm thick cement mortar 1:6, on unven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and directed
M&L for plastering 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed
M & L preparation of newly plastered or unplastered surface and applying two coats of oil bound distemper on walls complete all as specified and directed
M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed
M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.
M&L for complete removal of existing treatment under (Weather coat/OBD/Oil paint/ white wash/Cement base paint etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty @ 1KG (undiluted) per square meter of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI Step 3 :- Allow 6-8 Hrs time to dry the putty surface.
M&L for applying two coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
M&L for applying one coats of oil bound distemper on wall/ceiling surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
M&L for applying one coat of super quality weather proof exterior emulsion paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of weather proof exterior emulsion paint on the surface complete all as specified and directed.
M&L for applying two coats of super quality weather proof exterior emulsion paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of weather proof exterior emulsion paint on the surface complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces / concrete surface of any description over 10 Cm width or girth not otherwise described complete all as specified and directed
M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (white/ tinted) on walls/ ceiling complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair tripple layer rotational moulded vertical water storage tanks with closed tops (cylinderical ) fix hoisted and in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed.
S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.
S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-Charge.
S&F in repairs HDPE PVC lid (cover) for 500/1000 Litres capacity PVC tank complete all as specified and directed by Engineer-in-Charge.
M&L for removing plants / sherbs grown on wall/junctions with roots duly rendering herbicide chemical and making good of the existing brick/concrete surfaces of area n.exc 0.50 Sqm complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete (un reinforced) paving n. exc. 15 cm thickness( below or above ground floor) complete all as specified and directed
M&L for PCC (1:5:10) type E-2 (using 40 mm graded stone aggregate) as in sunken portion complete all as specified and directed
M&L for cleaning the sunken floor surfaces by wire brushes, brooming, removing dust by dismantling of floor, lime terracing and applying following :- (a) 10 mm thick screed bed in cement mortar 1:3 complete mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. (b) Bitumen primer confirming to IS-3384-1965 @ 0.50 Kg Per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS - 702-1998 for water proofing membrane. (d) Applying of polymeric water proofing membrane weight not less than 3 Kg/Sqm over entire area with overlaps and sealed all as specified directed. (e) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over water proofing membrane. (e) Dusting dry sand @ 0.75 Kg Per Sqm over water proofing membrane.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L Glazed coloured ceramic tiles in vertical surface 450 X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Taking down or up steel water tubing and connections of 15 mm bore removing the debris including mortar out side defence land complete all as specified and directed by Engineer-in-Charge.
S & F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.
Dismantling of Stone slabs laid, bedded and pointed in any mortar complete all as specified and directed
M&L machine cut kota stone slab 18 to 20 mm thick laid over and including 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry including cutting and pre polished mirror polishing complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and dirceted
M& L as in repair for 60 mm thick, M-35 grade machine pressed precast interlocking concrete coloured (Red/yellow) paver block over 25 mm thick sand cushioning in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 complete all as specified and directed by the Engineer-in-Charge.
M&L for coloured chequered cement concrete tiles 25cm x25cm or 30cmX30cm x22/25 mm thick, set, jointed & pointed in neat cement slurry over 20 mm screed bed in CM (1:6) including taking down old one and removing of debris away from MOD land, complete all as specified and directed by the Engineer-in-Charge.
S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engineer-in-Charge.
S&F plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-Charge.
S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC (SWR) floor trap 75mm with grating including jointing with solvent complete all as specified and directed
S&F in repair bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
S & F in repair PVC bib tap for 15 mm dia pipe complete all as specified and directed.
S&F in repair 15 mm dia bore two in one bib cock cast copper alloy with all accessories complete all as specified and directed.
S&F in repair brass chromium plated waste coupling 100 / 75mm dia for Sink complete all as specified and directed by Engineer-in-Charge.
Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.
Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed.
Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM. Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series).
Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series).
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium frames glazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified and directed.
S&F in repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window frame complete all as specified and directed
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete all as specified and directed.
S &F Rolled mild steel sections conforming to Gde Fe-410-0 grade A as in framing for cladding, glazing and the like including door frames/ chowkats, fixed with angle cleats and connecting plates, etc complete all as specified and directed
S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed.
S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window frame complete all as specified and directed
Taking down of old unserviceable Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measured only complete all as specified and directed
Supply & fixing block board 18/19 mm thick, grade 1 quality, exterior BWP grade termite proof, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18mm wide 6 mm thick beading of Its class HW (Teak) or 0.5 mm thick PVC sheet lipping all around, fixed in repairs, complete all as specified and directed
S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete all as specified and directed
M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed
S&F of 125 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
S&F 100 mm long butt hinges medium weight cold rolled stainless steel with galvanized complete all as specified and directed.
S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specified and directed.
S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair door stopper of aluminium, alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed.
S& F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.
S&F in repair PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and directed.
S& F in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.
S&F in repair PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and directed.
M & L Cleaning and removing all scales and dirt, etc, from water tanks and from mouths of circulating pipes,etc (capacity of tank exc 250 ltrs & n exc 500 ltrs) including disconnecting and connecting the GI pipe and water tank complete all as specified and directed .
S&F in repair curtain rods with mild steel conduit pipe 20 mm bore PVC coated of 1 mm thick including temples, brackets etc complete all as specified and directed by Engineer-in-Charge
shakti construction (BID ID -3364801)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .