8117/E8 ADDN/ ALTN TO 02 X LD STANDS AT SHREERAM KUMAR STAND AND P HILL AT OTA CHENNAI UNDER GE STM

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in foundations, filling and mass concrete

Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC Note : - WPC shall be measured & paid seperately.

Supply only Liquid water proofing chemical.

Returning, filling in, using excavated soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated surplus soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Finishing walls with Acrylic Smooth exterior paint of required shade (Two coats applied @ 1.67 ltr/10 sqm) and including priming coat of exterior primer including priming coat of exterior primer incl preparing newly plastered wall surfaces.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Two coats of synthetic enamel paint over a coat red oxide primer incl preparing new steel Surfaces of any description, over 10cm in width or girth,not otherwise described

All as per item No 10 above but n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

Sand filling under floors or in foundations including watering and consolidation

Hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75mm thick plain cement concrete 1:4:8 type D- 2, using 40mm graded stone aggregate as in sub base

M&L for 40mm thick plain Cement concrete 1:2:4 type B-0, using 12.50mm graded stone aggregate as in floor finish

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. cement or cement lime plaster, any description

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc.

S&F mild steel plate girder or single stanchions/ Post, built up of one beam or channel section with flange plates, caps, bases splices, angle barakets, cleats and other connections, FE 410-W (Gde-E-250)

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

All as per item No.21 above but Errection and fixing only

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

All as per item No 23 above but except sheeting

One coat of synthetic enamel paint incl preparing old steel Surfaces of any description, over 10cm in width or girth,not otherwise described

Finishing walls with AcrylicSmooth exterior paint of required shade incl preparing old wall surfaces (Two coats applied @ 1.67 ltr/10 sqm )

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, in hard/dense soil

M&L for plain cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete

S&F mild steel diameter of neck, 11 to 15mm screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long

M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in exc 0.5 sq. m in each pane

M&L for powder coated of any colour (Thickness or powder coating not less than 50 micron). anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil

100mm thick plain cement concrete type 1:2:4 B-1 using 20mm graded stone aggregate as in floor finish

Forming contraction (Dummy) Joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels plates etc., including welding, grinding, buffing, polishing and making curvature (where required ) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangements complete all as specified and directed.

S&F mild steel plate girder or single stanchions/ Post, built up of one beam or channel section with flange plates, caps, bases splices, angle barakets, cleats and other connections, including increase height of mild steel post (Avg ht of upto 60cm) including erection with one steel stanchions/ Post and necessary welding and scaffolding as required, steel grade of FE 410-W (Gde-E-250) Quality - A complete all as specified and directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-metallic rigid PVC conduit PVC conduit fittings and conduit accessories concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telephone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed.

(a) One light point controlled by one switch.

(b) One 3 pin 5 amps switch socket on same board along with other switches.

(c) One 3 pin 5 amps switch socket on independent board.

All as per item No.39 above but with4 sqmm copper conductor cable with 4 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as specified and as directed.

Supply and fix Wall mounted LED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver all as specified and as directed.

Supply and Fix Endura PEARL 30 W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type: 30W LED 6000K all as specified and as directed.

Supply and fix MCCB Distribution board, TP&N, vertical, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

Supply and fix MCCB four pole, 415 Volt, 100 Amps,16 KA , adjustable thermal & fixed magnetic setting in complete all as specified and directed.

Supply & Fix MCB TP 415 volts, 100 amps 'C' Curve 10 kA Capacity all as directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply & Fix MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity all as directed.

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity all as directed.

S&F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals all as directed.

S&F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed

S&F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S&F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Removing excavated material surplus soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Returning filling in using excavated soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as directed.

Supplying and laying burnt brick "B" class standard size for protection of cable as directed.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed.

Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes all as specified and as directed. Note:- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

(a ) 2 core 10 Sqmm

(b ) 4 core 25 Sqmm

S&F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate complete all as specified & directed.

Material and Labour for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Kaadosh Real Estates Pvt Ltd (BID ID -3070942)