DRILLING AND DEVELOPMENT, CONSTRUCTION OF PUMP HOUSE D-TANKS, FENCING OF BARBED WIRE AND ENERGISATION OF 07 NO. DEEP TUBEWELL OF SHRI ANANDPUR SAHIB AND ROPAR BLOCK IN DISTT. ROPAR AND BLOCK BALACHAUR AND SAROYA IN DIST. SBS NAGAR

Amount

A) Drilling, Development, Over Development CONSTRUCTION OF PUMP HOUSE,D-TANKS,FENCING OF BARBED WIRE& ENERGISATION of Works etc. OF Saroya & Balachaur Block of Distt SBS Nagar

Drilling of 600mm dia bore with reverse rotary rig in all kinds of soil including the cost of consumable stores,fuel oil and transportation of rig to the site Complete in all respect of T/Wells Kulpur,Taprian Khurd,Sudha Majra & Mandhiani

(a) From 0 to 150 Meter.

(b) From 150 to 300 meter

Supplying,lowering of M.S. pipe as per IS :4270:2001 including M.S. socket having dimensions as per IS code duly welded with M.S. electrode to have extra strength to lower pipe into tubewell bore.

(i) 300mm nominal diameter (weight 62.3 kg per metre) 8.00 mm thickness

(ii) 200mm nominal diameter ( weight 41.6 kg per metre) 8.00 mm thickness

(iii) Supplying, fixing and lowering of stainless steel cage type wire wound screen as per IS 8110-2000 or latest with ISI marked duly wellded with suitabe grade SS welding electrode to lower the strainer into tubewell bore 200mm dia Stainless Steel 8mm thick Strainer For 1.0 mm Slott."

Supplying, Fixing and lowering of Stainless Steel Socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode. to lower the strainer into tubewell bore. 200 mm diameter

Supplying, Lowering & fixing of M.S. Special Socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect. 200 mm internal diameter

Supplying and fixing of bail plug of MS pipe complete with invertor U-Block attached to the bottom plug complete in all respect. 200mm internal diameter (weight 41.6 kg per metre )8.00mm thick.

Providing and fixing M.S. Taper/Reducer made out of 6mm thick sheet complete in all respect. M.S. Reducer 300 x 200mm dia.

Supplying and fixing Mild Steel Centering guides madeout of 32mm X 6mm thick M.S. bar complete in all respect. Center guide 300 x 200mm dia.

Supplying and fixing of well cap having thread to fix on housing pipe complete in all respect. Top well cap 300mm dia.

Supplying and fixing of M.S. Clamp of size 300mm X 12mm made out of MS flat 1.52m long, suitable to fit housing pipe including the cost of nut and bolt of suitable size complete in all respect. M.S. Clamp 300mm dia.

Supply at quarry site of gravel of 1/16” to 1/8” including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from , dust , dirt, or the vegetable manner as per IS :4097/1967 with latest amendments (to be paid as per actual length of pipe). For proper approved size from Nearest quarry to site of work.

B) Drilling, Development, Over Development CONSTRUCTION OF PUMP HOUSE,D-TANKS,FENCING OF BARBED WIRE& ENERGISATION of Works etc. For T/Well Khanpur, Bada Pind and Bharatgarh, of Sh. Anandpur Sahib & Ropar Block

Drilling of 500mm dia bore with Direct rotatry rig in all kinds of soil including the cost of consumable stores,fuel oil and transportation of rig to the sit. Complete in all respect.

(a) From 0 to 150 Meter.

Supplying,lowering of MS pipe as per IS :4270:2001 including MS socket having dimensions as per IS code duly welded with MS electrode to have extra strength to lower pipe into tubewell bore.

250mm nominal diameter ( weight 52.3 kg per metre) 8.00 mm thickness

Supplying, fixing and lowering of stainless steel cage type wire wound screen as per IS 8110-2000 or latest with ISI marked duly wellded with suitabe grade SS welding electrode to lower the strainer into tubewell bore" 250mm Steel Strainer (slot size 0.75mm)7.30 mm thickness

Supplying, Fixing and lowering of Stainless Steel Socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode. to lower the strainer into tubewell bore of 250mm dia meter

Supplying, Lowering & fixing of M.S. Special Socket to connect S.S. Strainer to M.S. Pipe of 250 mm dia duly welded with suitable grade welding electrode complete in all respect.

Supplying and fixing of bail plug of MS pipe complete with invertor U-Block attached to the bottom plug complete in all respect. 250mm internal diameter (weight 52.3 kg per metre )8.00mm thick.

Supplying and fixing Mild Steel Centering guides madeout of 32mm X 6mm thick M.S. bar complete in all respect.

Supplying and fixing of well cap having thread to fix on housing pipe complete in all respect. Top well cap 250mm dia.

Supplying and fixing of M.S. Clamp of size 150 mm X 12mm made out of MS flat 1.52m long, suitable to fit housing pipe including the cost of nut and bolt of suitable size complete in all respect. M.S. Clamp 250mm dia.

Supplying at site wooden box of suitable size with lid and locking arrangement for preserving strata sample collected from the bore.

Making temporary water supply arrangement for drilling of tubewell with reverse rotary rig till completion of bore and packing of gravel. Depth of temporary bore upto 90 mtr

Supply at quarry site of gravel of 1/16” to 1/8” including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from , dust , dirt, or the vegetable manner as per IS :4097/1967 with latest amendments (to be paid as per actual length of pipe). For proper approved size from Nearest quarry to site of work.

Resistivity Survey

Making electric logging of bore hole with electronic well logger including cost of equipment at site etc. complete in all respect.

DEVELOPMENT AND OVER DEVELOPMENT CHARGES.

(a) Development and stabilizing of the t/well with Air Compressor of required capacity as directed by engineer-in charge including cost of tools, appliances and consumable to the satisfaction of engineer-in-charge. Capacity of air compressor 300 cfm at 250 PSI

(b) Development and stabilizing of the tubewell with submersible pump of required capacity as directed by the Engineer- in – charge including the cost of tools , appliances and consumable to the satisfaction of engineer-in-charge.

B. Construction of Pump House, D-Tank, fencing of pump house area with barbed wire as per approved drawings and PWD specifications for 7 No. T/wells

Const of Pump House Size 10’ x 8’ and 11’ht. with 9” thick wall with 1:7 brick masonary cement sand mortar, RB slab 1:3,6” thick with brick plumbing, cement plaster 1:6, 12.5mm thick on walls, cement plaster 1:4, 12.5mm thickness on ceiling, cement pointing 1:3 deep variety out side the pump house, as per approved drawing.

Construction of D-Tank Construction of D-Tank as per approved drawing with brick masonary 1:5 in cement sand mortar in foundation and above plinth level, with cement plaster 1:3, 12.5mm thickness on walls in side, cement plaster 1:4, 12.5mm thick outside D-tank.

Providing Fencing Providing fencing around the Pump House and D-Tank as per approved drawing & Design complete in all respect. (Including Corner Pillers,Gate Pillers and Steel Gate)

Energisation for 7 No. T/Wells

Submersible pumping set of 30 H.P. 60 Mtr Head

Submersible pumping set of 35 H.P. 70 Mtr Head

Submersible pumping set of 40 H.P. 80 Mtr Head

Submersible pumping set of 55 H.P. 115 Mtr Head

Submersible pumping set of 65 H.P. 125 Mtr Head

Submersible pumping set of 75 H.P. 140 Mtr Head

Submersible pumping set of 80 H.P. 150 Mtr Head

Three Core Submersible Flat Cable 10 sqmm.

Three Core Submersible Flat Cable 16 sqmm.

Three Core Submersible Flat Cable 25 sqmm.

Control panel complete 30H.P.

Control panel complete 35H.P.

Control panel complete 40H.P.

Control panel complete 55 H.P.

Control panel complete 65H.P.

Control panel complete 75H.P.

Control panel complete 80H.P.

MS pipe(heavy) (IS:1239/3589/4270), 100 mm i/d 5.40 mm thick

MS flange 4 “ dia , 5/8” thick , outer dia. 190 mm with 4 no. holes and 2 no. cuts

M.S. nut & bolt of all sorts

M.S. Lead clamp of 100 mm dia

M.S flat for jal

PVC insulator four core cable for connection from transformer to Control Panel

Supplying and fixing of well cap to fix on housing pipe complete in all respect -300 mm internal diameter

M.S. bend 4”,900 , 5 mm thickness, leg length 40 cm ,flange thickness 15 mm , 6 no. holes

Providing & fixing C.I/D.I flanged end , stem of SS (AIS 1410) & Bronze ( gunmetal) working parts sluice valves ISI maked 14846-2000 , including jointing. Testing & cost of Nut, bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) .Class PN-1 as per ISI 100 mm i/d Sluice Valves flanged

PVC copper wire 19/16 ISI marked.

PVC copper wire 7/22 ISI marked.

T/well provision soldier thimble, flexible pipe , copper earth plate, G.I. pipe 1" dia, G.I. wire, internal electrification & Double earthing, kitkat, rubber jain etc

labour for lowering of pumping set

MS Clamp 4" dia from 13mm thick MS sheet

MATERIAL AND LABOUR TO BE PROVIDED FOR TAKING OUT DELIVERY PIPE STAND

Supply of M.S. pipe (heavy)(IS:1239/3589/4270) 100 mm i/d 5.40mm thick

M.S. plain Bend 4” dia 5.40 mm thick.

M.S. flange 4” dia. For sluice valve

Providing & fixing C.I/D.I flanged end , stem of SS (AIS 1410) & Bronze ( gunmetal) working parts sluice valves ISI maked 14846-2000 , including jointing. Testing & cost of Nut, bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) .Class PN-1 as per ISI 100mm i/d Sluice Valves flanged

Welding of MS Pipe for connecting to the delivery pipe.

Any other items as per CSR+Z.P.

Shiv Drillers

Super Engineers India Pvt Ltd