Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹15.2 CrAccepted-AOC PROP ZISHAN ALI ADARSH NAGAR NEW BUS STAND RAMGARH CANTT RAMGARH | ₹15.2 Cr Quoted ₹15.3 Cr | 1st | Accepted-AOC Lowest |
| 2 | 2nd₹15.7 CrRejected-AOC | ₹15.7 Cr | 2nd | Rejected-AOC Other than lowest |
| 3 | 3rd₹16.0 CrRejected-AOC | ₹16.0 Cr | 3rd | Rejected-AOC Other than lowest |
| 4 | 4th₹16.6 CrRejected-AOC | ₹16.6 Cr | 4th | Rejected-AOC Other than lowest |
| 5 | Rejected-Technical | - | - | Rejected-Technical Being two class below the eligible class |
Tender Value
₹16.5 Cr
EMD Value
₹11.5 L
Closing Date
24 Feb 2020, 6:00 pmClosed
CE 31 Zone
CE 31 Zone
CONST OF 05XLRC IGLOO WITH ALLIED INFRA PATTAN
2019_MES_251922_2
CONST OF 05XLRC IGLOO WITH ALLIED INFRA PATTAN
Open Tender
Civil Works
910 days
GE 969 EWS
As per tender documents
5 documents required · 5 mandatory
₹3,000
Yes
₹11.5 L
Yes
6 Jun 2020
12 Oct 2019
25 Feb 2020
12 Oct 2019
24 Feb 2020
26 Nov 2019
12 Oct 2019 - 19 Oct 2019
Amount
Sch 'A' Part-I Sec-I ( Building works) carried forward from pre-priced Schedule.
Sch 'A' Part-I Sec-II ( Building works) carried forward from pre-priced Schedule.
Sch 'A' Part-I (Sec-III) (Building work) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Metallic sheet 3 mm thick for display board complete all as specified and directed.
Sch 'A' Part-II Sec-I (Internal Electrification works) carried forward from pre-priced Schedule.
Sch 'A' Part-II (Sec-II) (Internal Electrification work) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Supply and fixing for LED Flame proof fitting 1x20 W (CMRI certified) including connecting up with twin core flexible of type HRFR copper conductor cable with suitable size, complete all as specified and directed.
Supply and fixing for LED Flame proof bulkhead luminaires 1x10 W (CRMI certified) made up of die cast Aluminum housing with heat resistant toughened glass. IP65 protection complete including connecting up with twin core flexible of tyype HRFR copper conductor cable with suitable size, complete all as specified and directed.
Supply and fixing for LED bulb of capacity 5 watts lumen out put (500) length 102mm dia 56mm base cap B22, (ISI marked) complete with all accessories base (ISI marked) all as specified & directed by Engr-in-charge. Cat Part No : LEDADORE 5 W B22 CDL3 STAR LAMP of havells or its equivalent. Make Bajaj/Philips or its equivalent.
Supply and fixing FLEXITRON LED tube light 20W with High transmissitivity diffuser and high lumen output. PE>0.98, energy efficient complete all as specified and as directed by Engr-in-charg. Make : Havells/Bajaj/Philips/CG
Supply and fixing LED Mirror light/rechargeable light 6 watt with frosted PVC cover and pull chord incl Li-ion bty 3.7V, 2000 mAH (ISI marked) Cat Part No LHEXTEP7EN1W006 of havells or its equivalents make : Bajaj/CG/Wipro
Supply and fixing MCBs single pole and neutral (SPN) 6-32 amps with 10 KA breaking capacity of 'B' series in distribution boards (ISI marked) complete all as specified and directed.
Supply and fixing MCBs single pole (SP) 6-32 amps with 10 KA breaking capacity of 'B' series in distribution boards (ISI marked) complete all as specified and directed.
supply and fixing for heavy duty exhaust fan of size 300mm sweep, AC single phase 220 volts 50Hs, 1400 RPM incl louver shutter, EPM jaali, grounting etc. (ISI marked) complete all as specified and directed. Make : Havells/Bajaj/Usha/CG/Khaitan.
Supply and fix ceiling fans 1200mm sweep BEE 5 star rated single phase AC 220 volts 50 Hz aluminium body, copper wound with fan blade aluminium, three core copper wire lead, electronic type regulator (rotary type 360 degree) (ISI marked) complete alll as specified and directed. Make : Havells/Bajaj/Usha/CG.
Supply and fix water heater storage type, single phase AC, 220 volt, 50 Hz of capacity 50 litres BEE 5 star rated complete with all accessary i.e inner tank, glass wool, syphon assy, thermostate, heating elements 2.0 KW, safety released valves etc and grouting bolts nuts, Bolts & washers etc, (ISI marked) complete all as specified and directed by Engr-in-charge. Note : The rate inclusive of pipe line connection, fittings grouting/fixing, etc) Make : Havells/ Bajaj/CG
Sch 'A' Part-III (Internal Water Supply work) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
3 layer PP-R Polypropylene random co-polymer concealed pipes of 16mm outer dia SDR 7.4 (PN-16) UV-stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors, complete all as specified and directed.
3 layer PP-R Polypropylene random co-polymer concealed pipes of 20mm outer dia SDR 7.4 (PN-16) UV-stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors, complete all as specified and directed.
3 layer PP-R Polypropylene random co-polymer concealed pipes of 25mm outer dia SDR 7.4 (PN-16) UV-stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors, complete all as specified and directed.
Lagging to 20 mm bore pipe exposed PPR tubing all around (including provisions of lagging on pipe fitting i.e union, elbows, nipples, tees etc) with 40 mm thick bonded mineral wool performed 'SNAP ON' pipe section of density 144 kg/cum conforming to IS-9842 with chicken mesh wire netting 25 gauge, 20 mm mesh with 0.01 mm aluminium foil, complete all as specified and directed.
Lagging to 25 mm bore pipe exposed PPR tubing all around (including provisions of lagging on pipe fitting i.e union, elbows, nipples, tees etc) with 40 mm thick bonded mineral wool performed 'SNAP ON' pipe section of density 144 kg/cum conforming to IS-9842 with chicken mesh wire netting 25 gauge, 20 mm mesh with 0.01 mm aluminium foil, complete all as specified and directed.
Stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.
PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified & directed.
Brass chromium plated shower rose 125mm size with brass chromium plated shower arm minimum 200 mm long, complete all as specified & directed.
Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore of pipe complete all as specified & directed.
Angle cock, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed for bore of pipe 15mm complete all as specified and directed.
Bib taps, cast copper alloy long body, chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed for bore of pipe 15mm complete all as specified and directed.
Stop valve, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed don high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.
Sch 'A' Part-IV Sec-I (External water supply works) carried forward from pre-priced Schedule.
Sch 'A' Part-IV (Sec-II) (External water Supply work) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Material and labour for Threaded MS flanged for MS/GI water main with 8mm thick including nuts, bolts and washers, rubber gasket compete for 80 mm dia pipe line all as specified and directed.
Material and labour for construction of Valve pit of size 90cmx90cmx105cm(internal dimesnsions) brick chamber construction, including all necessary excavation and earth work in hard /loose soil, returning, filling in, disposal of surplus soil to a distance not exceeding 50m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), brick masonry in cement mortar (1:4), rendering, 12mm thick in cement mortar (1:4) internally, finished even and fair and pointing flush externally as the work proceedsin the same mortar, mild steel angle iron 50x50x6mm frame, MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS Work with two coats of synthertic enamel paint of the tint as apporved b y the GE over a coat of red oxide primer and painting all the MS embedded in PCC With two coats of black bituminous paint, complete all as specified and directed.
Material and labour for construction of Valve pit of size 60cmx60cmx60cm (internal dimesnsions) brick chamber construction, including all necessary excavation and earth work in hard /loose soil, returning, filling in, disposal of surplus soil to a distance not exceeding 50m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), brick masonry in cement mortar (1:4), rendering, 12mm thick in cement mortar (1:4) internally, finished even and fair and pointing flush externally as the work proceedsin the same mortar, mild steel angle iron 50x50x6mm frame, MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS Work with two coats of synthertic enamel paint of the tint as apporved b y the GE over a coat of red oxide primer and painting all the MS embedded in PCC With two coats of black bituminous paint, complete all as specified and directed.
Material and labour for MS clamp and making hole in existing GI 100 mm dia and fixing MS clamps flate iron (50x6mm) duly bend to shape suitable for 100 mm dia pipe, welded with GI socket 25mm dia for taking branch connection of Proposed GI 25 mm dia pipe complete all as specified. Note : the cost of necessary earth work shall be measured and paid separetely under relevant item of schedule.
Material and labour for cutting (2 cuts) and making thread at both ends cuts of existing GI pipe line of size 25mm dia in position for taking branch connection for GI pipe 25 mm dia and insertion of Tee, short pieces, socket reducer union etc. and connected accessories including excavation joints and jointing material complete all as specified Note : The cost of necessary earth work shall be measured and paid separately under relevant item of schedule.
Material and labour for opening existing GI pipe 80mm dia near existing UG sump 50000GLNS from GI uninion 80mm dia by necessary excavation & earth work and insertion of GI Tee 80x80x80mm size for taking branch connection suitable for proposed pipe 80mm dia. Note : the cost of necessary earth work shall be measured and paid separetely under relevant item of schedule.
Schedule 'A' Part-V (Sec-I) (External Electric Supply Works) carried forward from pre-priced Schedule.
Schedule 'A' Part-V (Sec-II) (External Electric Supply Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Supply and fixing single core FRLS PVC flexible mulitistranded wire 2.5 Sqmm, 240 volts drawn through ERW pipe 20mm dia incl for connection from street lights to junction box/SMC box ISI markes complete all as specified and directed. Note :- Three run (Phase, Neutral, Earth wire) of single core wire will be measured as one run) complete and the cost of MS clamps if necessary shall be measured and paid separetely under relevant of Sch 'A'.
Provision of new generation energy saving & enviromental friendly long life versatile pressure die-cast alumininum IP66 roadway laminaire with high power as 48W LED 6000K suitable for pole dia 54mm maximum complete all as specified and directed by Engr-in-Charge. Make : Havells Cat part No. LHETBXU7PN6W048 OR EQUIVALENT OF MAKE AS PER GROUP-II OF APPDX 'E'
Provision of bracket for fixing of street light fittings bend to shape, made out of 50mm dia GI pipe light grade upto 1.2 mtr long bend to shpae to an angle 120 degree fixed with and including clamps made from Flat iron of size 40x5mm, MS clamps bolt, nuts & washers & two coats of aluminum paint over a coat of red oxide primer complete all as directed
Supply and fixing Hot press molded case SMC junction box with SMC base and SMC door fixed with hinge on left (L) or right side (R ). (Colour off white), MCB 2.5 Amps, 63 Amp rated bus bar of size (HxWxD) 250x200x100mm product code JSJB 2520 Make : Syntex/Hensel
Sch 'A' Part-VI (Sec-I) (Road/Culvert/Path Works) carried forward from pre-priced Schedule
Sch 'A' Part-VI (Sec-II) (Road/Culvert/Path Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Cat eye of following specifications:- reflector body material ABS plastic size 90 x 110 x 16 mm solid state double moulded having ultra-violet resistant colours (white/red/yellow) having micro cube corner spark glow reflector white/red/yellow to a side provided with L-key steel 12mm dia bolt along with ABS plastic stem of length 55mm for fixing to road witeh expoxy adhesive. Cat-Part No GPL-BS-02-12 Make : Greens/Greenlite OR EQUIVALENT IN DARK EYE / ASIAN LOTTO.
Sch 'A' Part-VII (Sewage Disposal Works) carried forward from pre-priced Schedule.
Sch 'A' Part-VIII (Area Drainage Works) carried forward from pre-priced Schedule.
Sch 'A' Part-IX (Protective Works) carried forward from pre-priced Schedule.
Sch 'A' Part-X (Demolition Works) carried forward from pre-priced Schedule.
Sch 'A' Part-XI (Site Clearance and Earth work) for works covered under Sch 'A' Part-II to IX) carried forward from pre-priced Schedule.
mirco builders
ALCO ENGINEERSPVT LTD
M/S CONSTRUCTION ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid