Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-AOC LUCKNOW | LUCKNOW | UTTAR PRADESH | 226001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹30.1 L+₹37,365.80 (1.26%)Rejected-Finance T C L COLONY SAROJINI NAGAR LUCKNOW UTTAR PRADESH PIN 226008 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226008 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹30.5 L+₹70,258.10 (2.36%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹35.0 L+₹5.2 L (17.5%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹36.4 L+₹6.6 L (22.2%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹42.6 L
EMD Value
₹85,300
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF Memaura
AGE (I) AF Memaura
ADDITIONAL ALTERATION TO OFFICERS MESS AT AF STN MEMAURA
2023_MES_600489_1
8307/E8
Open Tender
Civil Works
Works
183 days
AGE (I) AF Memaura
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) AF Memaura
₹85,300
Yes
15 Jul 2023
2 Jun 2023
3 Jul 2023
2 Jun 2023
1 Jul 2023
16 Jun 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .
Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .
M&L Cement concrete1:2:4(20mm graded aggregate type B-1) 25mm thick as in sub base of floor etc complete all as specified and directed
M&L Cement concrete 1:5:10 type E2 (using 40mm graded aggregate) as in sub base of floor etc complete all as specified and directed
M & L for machine cut kota stone slab flooring 20-25 mm thick and size each piece of kota stone should not be less than 550mmx550mm laid over 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite finish polishing complete all as specified and directed.
Supply & fix kota stone slab 20-25 mm thick as in skirting etc over and including 10mm screed bed in cement mortar 1:4 cement & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing to achive better finish complete all as specified and directed .
M&L for 18-20mm thick marble (Makrana white ) table rubbed and polished and laid in floor with cement mortar 1:4 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of stone complete all as specified and dircted.
M&L for 300 x 450 x 7/450x350x7 mm thick joint free Glazed ceramic coloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 complete all as specified.
M&L Non skid joint free ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed.
M&L for 300 x 200 x 7 mm thick joint free Glazed ceramic coloured tiles (premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 complete all as specifed.
Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .
Taking down of shutters of any description exc 2.0 sqmtr each
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension.comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (glass and wire mess paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply & fix mild steel framed work such as grills, grating, etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railing,cooler stands etc and similar work complete conforming to Fe-410-0 or Fe-310-0.
Supplying and fixing 3.8mm thick sheet glass ordinary quality, tinted, exceeding 0.50 Sq m in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs of stanless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.
Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply & fix mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.
M&L PCC 1:2:4 type B-1 (using 20 mm graded agg) for hold fast, cooping,pressed steel frame, benching roof kerbs etc . complete all as specified and directed.
Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 as required all as specified and directed.
Supply & fix pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm Thick mild steel sheets complete all as specified & directed.
Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm Thick MS sheets complete all as specified & directed.
S & F 30 mm thick Factory Made Flush shutters of solid core construction, with block board core and plywood face panels, commercial type with 1mm thick laminate on both sides complete all as specified and directed.
S & F for 35mm thick factory Made glazed and skelton shutters of 2nd class hardwood open rebated and prepaired to receive glass gauge etc divided into square with edge of sash bars and framing moulded beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a) all as specified and directed.
S & F 300 mm mild steel ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
Supply & fix aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.
S&F 300 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.
Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.
Supply & fix mild steel butt hinges 100mm long complete all as specified and directed .
Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .
M&L for 15mm thick screed bed in CM 1:3 mixed with water proofing compound as per manufacturer instruction , laying over green concrete surfaces, finishing the surface even and smooth with out using extra cement , complete all as specified and directed. (WPC measured separately)
Supply only liquid water proofing compound, complete all as specified and directed.
M/L for roof treatment with polymeric water proofing membrane with certain specification given below as under complete all as specified & directed) (a) Cleaning and brooming the surface of roof. (b) Providing average 15mm thick plaster bed in CM(1:3) mixed with water proofing compoundI( will be paid under item no-29 & 30). (c) After the concrete is fully dried. It shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.40 liters/Sqm. (d) After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm (e) Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as of manufacture’s technical representation. prepared surfaces and fusing the joints with blow torch application. (f) A coat of bitumen grade 85/25 shall be applied @ 0.30 Kg/Sqm. (g)applying a tack coat of hot blown bitumen grade 85/25 @ 0.3 Kg/Sqm. (h) Apply one coat of aluminium paint (0.2kg/sqm).
S&F door shutter with 12mm thick toughned glass including engravd " Airforce logo" of make modi Guard/ saint Gobain Including fixing with stainless steel patch fitting, door handle 'H' type with all necessary fitting & Locking Arrangement for each shutter complete all as specified and directed by engr in charge. Note- Rate including taking down of Old U/S door.
M& L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
M &L Complete removal of exsting treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 1.5mm putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters, celing etc by washing, rubbing down and stopping old painted surfaces and applying two coat of plastic emulsion paint on walls coloured or white complete all as specified and directed
M & L for prepration of unplastered surfaces of wall and applying a layer of Birla / JK. wall care putty and applying two coats of oil bound distemper complete all as specified an directed.
M & L for prepration of new plastered surfaces of wall and applying a layer of Birla / JK. wall care putty and applying two coats of oil bound distemper complete all as specified an directed.
M & L for prepration of new plastered surfaces of celing and applying a layer of Birla / JK. wall care putty and applying two coats of oil bound distemper complete all as specified an directed.
M&L preparing of unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
M&L preparing of new plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
Complete removal of existing treatment form the surface of wall of unplaserted surface of walls and applying two coats of cement base paint complete all as specified and directed.
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .
Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) surfaces finished even and fair faces without using extra cement complete all as specified and directed.
M & L for Rendering 15mm thick on fair face of brick or concrete and stone surfaces incl finish even and smooth(without using extra cement) in CM (1:4)complete all as specified and directed..
Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.
Material & labour for rendering 10mm thick in cm 1:4 as in ceiling finished even & fair faces complete all as specified and directed .
Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided as specified and directed.
Material & labour for reinforced cement concrete 1:2:4 type B1 used as in chajja, facia, shelves, manhole cover etc complete all as specified and directed.
M&L TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns,roofs slab etc and binding with MS wire ennealed less than 0.9mm dia
M &L for form work of soffits ,shelves etc. and similiar work including edges fair finished comlplete all as specified and directed.
M&L Brick work with flyash brick old size, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6 all as specified.
M&L for 17/ 18 mm medium density fibre(MDF) board exterior grade fixed to timber framework with screws both side prelaminated with one sidedecorative choice laminations and other side balancing white lamination fixed to timber frame work complete.
S & F of continous piano hinges mild steel bright finished width of flaps 30mm while open all as specified and directed.
S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed.
S & F 150mm long aluminium handles cast type anodized, complete all as specified and directed.
S&F hasp and staple 125mm long aluminium anodised complete all as specified and dircted
Material & labour for machine cut prepolished Udaipur green slab flooring 14 to 16mm thick on sheleve over cement mortar screed base laid and jointed with grey cement mixed with pigment to match the shade of slab including moulded/chemfered hole for pipe and rubbing and polishing complete all as specified
M&L for Granite (of any type) 20mm thick machine cut laid over and incl. 15mm thick screed bed/rendering in CM 1:6 as in steps/floors, bedded, platform and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
supply and fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all sepcified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleanig of surface complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee,socket elbow,clamp etc complete all as specified and directed
S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee ,socket,elbow,clamp etc complete all as specified and directed
Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .
S&F two bowl sinks with single drain board with matt finish made of stainless steel 1mm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or incuding fixing cantilever barckets and connecting union to pipe, overall size 1372x457mm, bowl size 405mmx355mmx178mm. Cat no- Silver shine SSDBSD-93.
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .
All as per Sl Item No 67 here-in-before but 20 mm bore pipe.
Supply & fix tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed .
All as per item No. 69 above but 20 mm bore pipe.
Supply & fix in repair long body bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed
Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised mouldings over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)
S & F PVC wall lining consisting of 5mm thick wood grain printed PVC Sheet inclusive of solvent cement and fixing at site on wall as per specifiaction and directed by eng- in charge.
Rough excavation not exceeding 1.5m deep and getting out in any type of soil and forming emabnkements including raising (or lowering) earth, spreading in layers n exc 30cm thick, watering, ramming,/rolling and finishing to required size, shape n exc 1.5m high from base and removing excavated material beyond 5 km upto diastance of 15 Km and depositing where directed complete all as specified and directed. Note : Contractor will brought soil fro filling at site from outside MoD land under own arrangement and any royalty to eb paid to private parties or government agencies for earth obtained deemed to be included inrates quoted by the contractor.
M&L Broken bricks hardcore of gauge 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified
M&L Cement concrete 1:4:8 type D2 using 40mm graded agg 75 mm thick as in sub base of floor etc complete all as specified and directed
M&L 25mm thick cement concrete type B-0 (1:2:4) 12.5mm graded aggregate as in sub base for floors complete all as specified and directed.
Material & labour for machine cut prepolished Udaipur green slab flooring 14 to 16mm thick on over cement mortar screed bed of 15mm in CM (1.6) laid and jointed with grey cement mixed with pigment to match the shade of slab including moulded/chemfered hole for pipe and rubbing and polishing complete all as specified
S/F steel works in tubular truss, purlins, post etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161 -1979 grade St-240 including one shop coat of Zinc Chromate Primer paint at contractors workshop before fabrication complete all as specified and directed.
S/F MS sheet as In base plate, gusset plate etc welded or riveted to tubular trusses including holding down bolts, nuts, rivets etc confirming to Fe 410-W(Gde -E-250)quality -A complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.
M & L for point wiring for light/fan/exhaust fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade (ISI Marked) having dia not less than 20mm with all fittings including Galvanised pressed steel shee sunk box with 3mm thick ISI marked laminated bakellite sheet fixed with cromium / nicckel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified and directed .
All as per srl item No 83 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.
All as per srl item No 83 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per item No. 83 here-in-before but by using 2.5 Sqmm FRLSH copper conductor cable with continuous earth wire of 2.5 Sqmm FRLSH copper conductor for one 3 pin 15 Amp socket outlet point controlled by one switch.
S & F point wiring with electrolytic grade solid annealed copper conductor, jelly filled coaxial screened TV cable (category AL FOIL+ AL BRAND) with maximum signal loss 3.5 db/ 100 yards @ 100 Ghz) drawn in and incl concealed rigid PVC conduit medium grade of size 20 mm incl a pressed MS sheet (1.6mm thick) sunk box of required module complete with frame plate and cover plate of required module for mounting a modular TV socket complete including cutting of chases in wall/ floor and making good the disturbed surface as per adjoining surfaces all as specified and directed.
S&F Modular type T.V socket, 1 Module, complete all as specified and as directed by Engr-in-Charge.
S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 5 pin 5/6 amps flush type 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 10- watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed.
S & F ceiling rose three terminals complete all as specified and directed.
S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.
S & F Wall / surface mounted type Bulk Head LED light fitting complete with LED lamp 10 watt , extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.
S&F LED Light Fittings having Ingress Protection class minimum IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 20 W complete with 25 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. all as specified and as directed.
S&F Decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for and including LED Lamp 7-8 Watt (B-22 base) all as specified and as directed.
Supply and fixing 20/22 Watt round shape (6" Dia) LED slim recessed panel light, 3000K Warm White, 230C, AC suitable for armstrong/grid ceiling complete all as specified. Make: Philips sleek surface downlight
Supply and fixing 20/22 Watt rectangle shape as required on site LED slim recessed panel light, 3000K Warm White, 230C, AC suitable for armstrong/grid ceiling complete all as specified.
Dismantling and taking down old serviceable Energy Meters of any type / capacity after necessary disconnection of electrical wires etc. and marking the Quarter No on each meters with parmanent marker pen and keeping in safe custody for re-fixing /reconnection in new meter cabinet all as specified and as directed.
Supply and fixing of vertical sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 and IK 09 protection alongwith cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following: (a) Incoming MCCB, 63 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) Outgoing MCB, SP, AC, 240 volt of 06 to 32 Amp, 'c' curve, 10 KA breaking capacity - 12 Nos.
Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Taking down distribution board of any type complete all as specified and directed.
S & F MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.
S & F MCB DP 240 volts, 'C' curve of rating from 40 to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
Taking down old unsv sub main wiring any type and size aluminium/ copper incl batten/ conduit and making good disturbed surface to match with existing complete all as specified and directed.
M & L for submain wiring with two single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 10 sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 10 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces.
All as per serial Item No 108 here-in-before but with 4.0 Sqmm nominal cross sectional area wire.
S & F concealed type GI Sheet enclousure for Modular switches / sockets etc. complete with a 25 Amps modular type motor starter(2 Module) with one single pole Modular type MCB of capacity 20 Amps (1 Module) & a 20 Amps 3 pin modular socket(2 module) including electrical connections all as specified and directed by Engr-in-charge. (For Air Conditioners)
M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results on a 3.0mm thick painted M.S. earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round M.S. rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the ground all as specified an directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep, heavy duty with, blades, and frame and louvers complete all as specified and directed.
Cutting holes on walls of any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
S & F of water heater storage type 50 Ltrs, Electrically operated, 4 star or above rating with FRP body and copper inner tank duly insulated with PUF insulation and heating element of 2 KW complete with all accessories such as safety valve, thermostate, NRV, PVC connection etc complete all as specified and directed.
Supply and fixing LED strip lights, 400 lu/m output, having IP65 rating, warm white (3000K) colour temp, complete all as specified and directed by Engr-in-Charge.
Supply and fixing of GI Tubing 50mm bore , medium grade with all fittings fixed to wall, floor, ceiling or laid in floors as directed. Make: Jindal/Prakash Surya.
Supply and fixing hook for hanging ceiling fans and similar small articles confirming to Fe-290 Gde-E-165 complete all as specifed and directed.
Rakesh Traders
M/S KAUSHIK CONSTRUCTION
ANIL CONSTRUCTION
M/s Shri krishna Constrcutions
MD BUILDER
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .