Carrying out various works on Semi Turn Key Basis for system Augmentation,. Strengthening in the area of EE, EUDD I, Mathura under the jurisdiction of SE, EUDC, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole (11 mtr. Long) (Bottom Portion Galvanized)

ST Pole Pole (13 mtr. Long) (Bottom Portion Galvanized)

630 KVA T/F

250 KVA T/F.

100 KVA T/F.

LT Aerial Bunch conductor.

LT XLPE/PVC cable 1cx630 sq.mm.

LT XLPE/PVC cable 1cx400 sq.mm.

LT XLPE cable of size 3.5x400 Sq. mm.

LT XLPE cable of size 3.5x240 Sq. mm.

LT XLPE cable of size 3.5x150 Sq. mm.

LT XLPE cable of size 3.5x70 Sq. mm.

33 KV XLPE Cable 3x300 Sq.mm.

11 KV XLPE Cable 3x70 Sq.mm.

11 KV XLPE Cable 3x185 Sq.mm.

11 KV XLPE Cable 3x300 Sq.mm.

33 KV VCB 800 A, 750 MVA

33 KV Control Panel for Single T/F

33 KV Control Panel for Double T/F

33 KV 3x300 Sq.mm. Outdoor type cable Jointing kit

11 KV 3x70 Sq.mm. Outdoor type cable Jointing kit

LT H/S Jointing Kit 3.5x240 Straight Through

LT H/S Jointing Kit 3.5x150 Straight Through

LT H/S Jointing Kit 3.5x70 Straight Through

11 KV Fuse set

11 KV TPMO

11 KV Bus Coupler

ACSR Dog/Weasel/Ins. Weasel conductor

Other line material such as cross arm, MS Bracing Set, MS top channel, bottom channel, Tee-channel with clamp , clamps, Pin Insulator, Disc Insulator nut & bolts, Earth Rod, EARTH wire, V Type X arm, F Bracket, Guarding Wire, etc.

Cartage of above material from store center, mathura to work site (Cartage rates are acceptable for only those materials, which are to be carriage from store center, mathura to work site)

Grouting of ST Pole with cement, sand, concrete, (CC will be of cement, coarse sand & brick balleast Grouting will be done with the help of wooden/steel formers in a block of size 900mm X 450mm X 1/3 of the full of the support in the CC 1:4:8 as per relevant drawing including back filling & proper ramming.

Digging of pit & erection of new single support ST Pole (13/11 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Four Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Tri Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Provinding & fixing of 24 Volt Battery with Battery Charges

installing/Fixing of Delta Earthing for I/C VCB

Earthing of ST/PCC pole/Body earthing of T/F. by M.S earth rod.

Providing & fixing of MS Nut, Bolt and Washer's

Providing & Painting of ST pole.

Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete. (Stay Insulator providing by contractor)

Installation of 33 KV VCB 800 A, 750 MVA

Installation of Control Pannel for Single T/F

Installation of Control Pannel for Double T/F

Supply and Laying of Control Cable 4x2.5 Sq.mm.

Supply and Laying of Control Cable 2x2.5 Sq.mm.

Plinth & Foundation of 33 KV VCB

Pipe in Pipe Gel Earthing for 33 KV VCB & Control Panel

Sagging of 33/11KV/LT line on Dog/weasel conductor on erected poles.

Providing & Sagging of 33 KV Line on Panther conductor on erected poles

Laying of AB conductor for LT line on erected poles.

Laying of LT PVC cable 1cx630 sq.mm.

Laying of LT PVC cable 1cx400 sq.mm.

Laying of U/G. LT XLPE cable of size 3.5x400 Sq. mm. with complete job

Laying of U/G. complete work of LT XLPE cable of size 3.5x240 Sq. mm. with complete job

Laying of U/G. complete work of LT XLPE cable of size 3.5x150 Sq. mm. with complete job

Laying of U/G. complete work of LT XLPE cable of size 3.5x70 Sq. mm. with complete job

Guarding of 33/11KV line. (including G.I. Wire and other related items)

Providing & fixing of Guarding Angle for 33/11 KV line

Providing & fixing of I Bolt for Guarding

Providing & fixing of Aluminium Biding Wire for Guarding

Providing & fixing of clamp for guarding angle for 11 KV line

Providing & fixing of Earth Wire Clamp

Providing & fixing of Danger Board

Providing & fixing of Barbed Wire

Providing & fixing of Stone Pad

Providing & fixing of P.G. Clamp

Fixing of 33/11 KV V type Steel Cross Arm

Fixing of 11 KV Pin Insulator with pin

Fixing of 33 KV Pin Insulator with pin

Fixing of Disc Insulator 45 KN & 70 KN (T&C/B&S)

Fixing of Disc fitting 45 KN & 70 KN (T&C/B&S)

Providing & fixing of 33 KV/ 11 KV F Bracket

Providing & fixing of Packing Piece Clamp for 33 KV/11 KV with nut & bolts

Providing & fixing of Aluminium Lug 150/240/400/630

Providing & fixing of ST Pole Clamp

Providing & Connecting Earthing Strip

Fixing & Filling of 33 KV 3x300 Sq.mm. Outdoor type cable Jointing kit

Fixing & Filling of 11 KV 3x70 Sq.mm. Outdoor type cable Jointing kit

Fixing & Filling of LT H/S Jointing Kit 3.5x240 Straight Through

Fixing & Fixing of LT H/S Jointing Kit 3.5x150 Straight Through

Fixing & Fixing of LT H/S Jointing Kit 3.5x70 Straight Through

Installation of 11/0.4 KV, 630 KVA T/F Mobile Trolley

Trolley Structure for 630 KVA T/F with vehicle tyre,rim,coupling,trolly hook,earthing, painting and related accessories with complete job

Providing & Fixing/Installation of C Type LT Panel Disconeccting and dismentling of existing C panel and Supply, installation testing commisioning of factory fabricated & wired metal clad dust and vermin proof double door type outdoor application stand mounting, M.S. Channel Base incliding channel stand with bottom cable entreis The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be complete with suitable cable end boxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panel board shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connecting incomming and outgoing cable terminations.

Providing & Laying of HDPE Pipe 160 mm OD PN-4 PE-80 Grade UV Stabilized HDPE as per IS: 4984 of 6 Meter length with complete work of cable laying

Horizontal Drilling underground installation piping HDPE Pipe 160mm dia with minimum depth of pipe 1.2 below surface for double circuit length of line

Laying of 33/11 KV XLPE cable in Double Pole structure/Loop etc.

Digging of trench by excavation of earth 0.90/1.5 Mtr. deep put brick on both side, filling of sand & brick on cable & earth ramming and dressing properly with complete job of laying 33/11 KV XLPE cable in trench

Installation of D.O. Fuse Set of 11 KV

Providing and Installation of 11 KV R.M.U. (as per elclosed technical specification)

Installation of TPMO of 11 KV

Concreting of Pole (ST 13 Mtr./11 Mtr.) PCC Pole

Installation & Fixing of Bus coupler along with Provding Accessories & complete installation of 11 KV bus coupler 1250 Amp. Copper flat with nut & bolt others acc. For connection 02 different I/C

Removal of old transformer(160/100/63/25/16 KVA) with all connected accessories from existing double pole.

The Construction of new Plinth of Size 5’X5’X4’ above ground level and one ft. below the ground level for 400/250 KVA transformer

Installation of following transformer on Plinth/Double pole with all connecting accessories jumering etc. including carriage of transformers from store centre, Mathura to work site.

250 KVA Transformer on Plinth

100 KVA Transformer on Double Pole structure

Providing and Installation of Tail less unit complete with Structure

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250 KVA transformer and gap between the M.S angle should not be more than 65mm.

Complete Gel earthingof 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Complete job of Road Restoration as original

Dismantling of single support ST/Rail Pole(13/11/9mtr.) with complete accessories and other dismantled as per site requirement and cartage of material from work site to Store Center, Mathura.

Dismantling of HT line and cartage of material from work site to Store Centre, Mathura.

Dismantling of HT line and cartage of material from work site to Store Centre, Mathura.

M/s G.D. Electricals