Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹32.7 L+₹1.6 L (5.00%)Rejected-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 3 | L3₹32.9 L+₹1.8 L (5.65%)Rejected-AOC | L3 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 4 | L4₹34.0 L+₹2.8 L (9.10%)Rejected-AOC 67 NIRANJANPUR SAHARANPUR ROAD PO MAJRA DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 5 | L5₹35.7 L+₹4.5 L (14.5%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L5 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹42.8 L
EMD Value
₹85,600
Closing Date
27 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) RND Dehradun
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
PROVISION OF CERTAIN MINOR AND SANCTION WORK CQA (I) LADPUR AND IRDE RAIPUR UNDER GE(I) RND DEHRADUN
2023_MES_578812_1
GE(I)RND/9209/E8/22-23
Open Tender
Civil Works
Item Rate
180 days
DEAL
Class D Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE (I) RND Dehradun
₹85,600
Yes
3 Mar 2023
3 Feb 2023
2 Mar 2023
3 Feb 2023
27 Feb 2023
15 Feb 2023
3 Feb 2023 - 15 Feb 2023
Amount
Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil etc complete all as specified and directed.
Excavating in trenches, in any type soil not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete as specified and directed.
Excavating over areas, exc 1.5 m deep and and not exc 3.00 m deep and getting out in any type of soil complete as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Removing excavated material soil exc 250m but not exceeding 500m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Spreading & levling in layers n exc 25 cm thick & well ramming including watering as required complete all as specified and directed.
M&L for Hardcore of broken stone or bolders guage n exc 63 mm, deposited, spread and levelled n. exc. 15 cm thick, watered and rammed to true surface with Broaken stone or boulder complete all as specified and directed.
M & L for treating the bottom and sides of excavation at the rate of 5 litres of anti termite emulsion per square metre of surface area complete all as specified & directed.
M & L for treating the top surface of filled earth at the rate of 5 litres of anti termite emulsion per square metre of surface complete all as specified & directed.
M &L for treating the soil under plinth protection at the rate of 5 litres of anti termite emulsion per square metre of surface area complete all as specified & directed.
M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of anti termite emulsion per metre of the perimeter wall complete all as specified and as directed.
M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed..
M & L for RCC 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L providing reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded crushed stone aggrete) as in roof slab, shelves and the like complete all as specified and directed.
M&L for Plain cement concrete 1:2:4 type -B2 (using 40mm graded crushed stone aggregate as in foundation filling & mass concrete , sub base complete all as specified and directed.
M&L for reinforced precast cement concrete(1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in landing, cover slab (for manholes, shelves), chullah hoods, chajjas, water troughs,mangers, shelves an similar articles with plain faces incluing necessary form work, & set in cement mortar (1:4) including demolition of old RCC covers of any description complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items
M&L for reinforced cement concrete(1:2:4) type B-1using 20 mm graded crushed stone aggregate as , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and the like complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items
M&L cement concrtee 1:2:4 type B2 using 40 mm graded crushed stone aggregate as surface channel drains, etc including demolition of cement concrete of any description in ground floor and pavings n exc 15 cm below or above ground level, complete all as specified and directed.
Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar complete all as specified and directed complete all as specified and directed.
M&L for brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed..
M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm complete all as specified and directed.
M & L for 18mm thick Granite stone slab (of any type/Colour ) Slabs machine cut in skirting/dado/ cill and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rounding to edges cutting and polishing over and including 10mm thick cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing for Granite stone slab complete all as speifide & directed
M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and directed.
M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M & L for used and waste for form work to edges of concrete flats, treads breaks of floor, openings in concrete wall, floor and roof, exc 10cm but n.exc 20cm wide and sides of bands in walls, horizontal or sloping for rough finished concrete surface complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from frame) not exc. 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4.0 Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.
S&F Ist class HW plain, solid, straight chowkates and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
M&L for 40 mm thick flush shutters, solid core construction, exterior grade with particle board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for fixing mortice locks, latches or other fittings complete all as specified and directed.
S&F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid PVC Moulded door Shutter with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
M&L for PVC SHEET WALL PANELLING (colour and shade as approved by GE) of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site) complete all as specified and directed.
S&F in 18 to 19 m thick solid factory made PVC board board for cup board/cabinate shutters with one or both side laminated printed PVC celluka board ,anti termite and anti moisture proof etc sheet fixed with & including suitable PVC frame and Magnetic door catcher with all necessary fittings as per specification & drawing complete all as specified and directed.
S&F 100 mm long mild steel butt hinges, medium weight cold rolled including welding if required complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminium handles,cast type anodized D type complete all as specifed and directed.
S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F Floor door stopper double leg of 140 mm overall length aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed.
S&F 125 mm size aluminium handles,cast type anodized D type complete all as specifed and directed
S&F 35-40 mm dia brass knobs for cupboard fixed with nut and screw and washer of mild steel, bright finished complete all as specified and directed.
S&F continous (piono) hinges mild steel, bright finish or electrogalvanised with width of flap (when open) 40 mm complete all as specified and directed.
S&F 125 mm long hasp & staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
S&F Aluminium (dia cast) body door closer hydraulic regulated door closer, suitable for door shutter up to 1000mm in width and of weight 61 to 80 Kgs and fixed complete all as specified and directed.
S&F vertical window blind manually operated different/ single shade and design as approved by GE/ Engr-in-Charge including necessary fitting complete all as specified and directed.
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
All as per items No 49 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.complete all as specified and directed.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.
S & F Steel window with side hung shutters including projecting type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.
S & F M.S Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F, M.S Plates (plain or chequered) Fe-290 (Gde- E- 165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
S&F, M.S work as in Roof trusses (framed) Fe 410-W (Gde -E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces cleats etc. complete all as specified and directed.
S&F 11 to 15mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other end, or screwed both ends, each screwed and to fitted with washers and one hexagonal or square nut exc 10 cm and n exc 15 cm complete all as specified and directed.
M&L for Bands, straps, rungs, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete as specified and directed.
S&F powder coated aluminium sliding window two track with two 4.80mm thick black glass shutters aluminium powder coated section aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved complete all as specified and directed. Note Size of aluminium section shall be under :- (i) Two track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii) Two track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent
S&F powder coating anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
S&F powder coating anodised aluminium frame for doors, windows, ventilators or partition with one or more rebates including aluminum beading, hinges of required size jointing cleats, screws, dash, fasteners, pug for fixing with wall, columns etc complete all as specified and directed.
M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&LProviding & fixing false ceiling semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. including dismantling of ceilling or ceilling board with cover fillet or any descritpion etc complete all as specified and directed. The work shall be carried out as per specifications, drawing and as per directions of the GE/Engineer-in-Charge. Make:- Diamond Ceiling or equivalent. Note :- PVC protected sheeting shall be used to avoid scratches,damages to the framework while fixingto ceiling.
M&L 12 mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations complete all as specified and directed.
M&L for non skid coloured ceremic tiles 7 to 8 mm thick (square/rectangular) area of each tilles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed.
M&L for Glazed ceremic tiles in vertical surface 350x250x7 mm /450x350x7 mm thick set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 10 mm thick rendering in cm (1:3) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in plinth protection laid in alterrnate panels and finish even and fair complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18 to 20 mm thick in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over with and including screed bed or bedding layer of cement mortar 15mm thick in CM 1:6 complete all as specified and directed.
M&L for Kota stone slab 15 to18 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thich rendering cement morter (1:3) and jointed with grey cement complete all as specified and directed.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M & L forVirified Ceramic tiles 10 mm thick dark shade double charged/ultracharged (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match with shade and including 15 mm thick screed bed in CM 1:6 with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.
Srl item No 71 above but on vertical surfaces such as skirting with and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A/BOQ.
M & L rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:3 with mixing liquid water proofing Compound as per manufacturers's instructions complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A' BoQ.
M&L for 5 mm thick cement plaster in 1:3 cement mortar, on concrete ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.
Taking down existing cement or cement lime plaster/Grit wash of any description and in any position on brick or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc complete all as specifed and directed.
M&L for Rendering 15 mm thick on fair faces of concrete /brick surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparing new plastered surface of walls and applying two coat of Oil Bound Distemper over and including a coat of alkali resistant primer over 3mm thick damproof wall care putty in two layer complete all as specified and directed.
M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.
M & L for preparation of newly plastered or unplastered surfaces of Ceiling, and applying two coat of white wash complete all as specified and directed.
M & L for Preparing new plastered surfaces of Wall and apply three coat of white wash complete all as specified and directed.
M & L for complete removal of existing treatment from wall / Ceiling by using machinery & preparation of new / scrapped surfaces of wall / ceiling and applying two coats of oil emulsion white or tinted over a coat of alkali resistance primer over a coat of 3mm thick wall care putty in two layer complete all as specified and as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed
M&L for 4.0 mm thick sheet glass ordinary quality in panes n.exc 0.50 sqm each pane fixed with oil putty complete all as specified and directed.
M&L for 4.80 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each pane fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.
M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..
M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L two coat of varnishing finishing coat with synthetic varnish including preparation of old treated surfaces of any description , over 10 cm in widht or girth complete all as specified and directed.
S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.
S&F vitreous chiana wash down water closet (Pedested patern ) white including fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, and including 32mm dia waste pipe complete all as specified and directed.
S&F Vitreous china WHB , white size 550 x 400 mm, flat back including brackets incluing cutting for and pinning in ends of brackets or eracting stands including fixing of waste pipe complete all as specified and directed.
S & F, vitreous china urinal half stall type of flat back, , white with grating & unions for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and unions for discharge pipe and connecting complete all as specified and directed.
S & F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) and unions for discharge pipe and connecting complete all as specified and directed.
S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight of 15mm size 142 gms complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed.
M&L for 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting complete all as specified and directed.
M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S& F 15 mm bore Pillar taps, cast copper alloy fancy type with capstan heads CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe. complete all as specified and directed.
S & F for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated complete all as specified and directed.
Supply and fixed 15 mm dia stop valves, cast copper alloy fancy type, chromium plated screwed above high pressure with crutch or butterfly handle and screwed both ends for iron or for union complete all as specified and directed.
S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S& F PVC (SWR) floor trap,75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.
S&F PVC(SWR) gully trap 125/110 mm, size setting and jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring jounts laid in trenches or in floor.complete all as specified and directed.
M & L Reinforced concrete pipes, 150mm dia/ bore of pipe class NP2, laid and jointed in trenches complete with collars complete all as specified and directed
M&L for concrete bed in cement concrete 1:4:8 type D-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm bore of pipe complete all as specified and directed.
S & F For PVC(SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all as specified and directed.
S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed iron pipe or for unions of 20 mm bore of pipe / dia complete all as specified and directed.
S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S&F Nipple suitable for HDPE water tank. (Minimum weight for 20mm bore 45gms) complete all as specified and directed.
M&L for Construction of soakage well of size 1.8M dia X 3.00 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 (design mix) concrete, including intercepting chamber, screen chamber, brick work in CM 1:4, plaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm complete all as specified and shown Drg No.TD-309 sheet 1/4 to 4/4
M&L for Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 roun or 3/4 section) in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching as required complete all as specified and directed.
S&F PVC (SWR) pipes 150 mm,single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) bends any radius for 150 mm bore of pipe complete all as specified and directed.
S&F 75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F Cast iron cowls 75 mm diacomplete all as specified and directed.
S&F cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75 mm dia complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.
Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed
Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as complete all as specified and directed.
Supply and Fix in replacement of old unsv light fitting with LED recessed full lit luminaire warm white light (2'x2') 24 Watt along with driver with all accessories complete all as specified and directed.
Supply and Fix in replacement of old unsv light fitting with LED recessed full lit luminaire(2'x2')24 Watt along with driver with all accessories complete all as specified and directed.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 25 mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified and directed.
One light point controlled by one switch.
One fan point controlled by one switch
One socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
One socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.
M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.12 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 16 amp socket outlet controlled by one switch on independent board. Note:- (i) Rate for Modular metal flush boxes and white cover plate with frames are deemed to be included under above item. No seperate payment shall be made on this account complete all as specified and directed.
As per item No 131 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete.
S&F piano switches with Modular switch single pole one way 6 amp complete all as specified an directed.
S&F piano switches with Modular switch single pole one way 16 amp complete all as specified an directed.
S&F 6/16 amp sockets with modular socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified an directed.
S&F 6 amp sockets with Modular socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed.
S&F ceiling roses with ceiling rose 3 plates polycarbonate body complete all as specified and directed.
S&F fan regulators with modular fan step regulator 120W 2 module including connecting up complete all as specified and directed.
M&L in replacement of UNSV sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable of size 4x10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x10 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed. Make of cable : Gloster/Polycab/L&T Make of PVC conduit & fittings : AKG / /Plaza/Jindal /Avon/Finolex/ Polycab /Kalinga.
S&F in replacement of UNSV distribution board with TPN DB-Double Door 415V 4 way of module(8+12) with IP:43 protection, isolated neutral bar,insulated busbar assembly, cement spill protector,door earthing,earth bar,din bar, mechanical impact strength IK 08,recess mounted and connecting the wiring with Isolator TPN and MCBs and all accessories complete all as specified and directed complete all as specified and directed.
S&F in replacement of UNSV distribution board with TPN DB-Double Door 415V 6 way of module(8+18) with IP:43 protection, isolated neutral bar,insulated busbar assembly, cement spill protector,door earthing,earth bar,din bar, mechanical impact strength IK 08,recess mounted and connecting the wiring with Isolator TPN and MCBs and all accessories complete all as specified and directed.
S&F in replacement of UNSV distribution board with TPN DB-Double Door 415V 8 way of module(8+24) with IP:43 protection, isolated neutral bar,insulated busbar assembly, cement spill protector,door earthing,earth bar,din bar, mechanical impact strength IK 08,recess mounted and connecting the wiring with Isolator TPN and MCBs and all accessories complete all as specified and directed.
S&F in replacement of UNSV MCB TPN with MCB TPN 'C' Curve 63 Amp suitable for fixing in TPN DB 415V 4 way,6 way and 8 way with all specifications as mentioned above in Item No. 140, 141 and 142 complete all as specified and directed.
S&F 63 Amp 4 pole 30mA sensitivity RCD add on block with degree of protection IP20 confirming to IEC 60947-2, rated conditional short-circuit current lcc 10kA, 35 Sqmm terminals, dual position DIN Clip complete with all accessories all as specified and directed .
S&F in replacement single pole 6 to 32 Amp 'C' series MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings complete all as specified and directed.
Supply and fix in replacement of unsv enclosures with new single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20/32 Amp complete all as directed and specifed.
S&F LED mirror light fitting,10 watts,1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre- wired including connecting to mains complete all as specified & directed. Make- LCTLN-10-CDL of Crompton or equivalent in Havells /Phillips
S&F LED 20W complete batten fitting, efficacy: 100 lumen/watt with all as accessories complete all as specified & directed. Make: LCTLN-20-CDL of Crompton or equivalent in Havells/Philips.
S&F integrated LED bulk head fitting 10 W 600 lumens, 6000 K comprises of pressure die cast housing, acrylic diffuser and frame IP 65 protection, IK-07 etc including connection complete all as directed. Make-LBHP-10-CDL of Crompton or equivalent in Havells/Phillips as approved.
Supply and fix exhaust fans made up of sturdy engineering plastic body single phase AC 230/240V of size 250 mm sweep with louver and with all accessories including making circular holes suitable for mounting the exhaust fans and making good the disturbed surfaces with PCC complete all as specified & directed. Make: Bajaj/Crompton/Havells.
M&L for sub main wiring with sub main wiring PVC insulated, unsheathed stranded copper conductor cable of size 2x4 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with PVC(green colour) insulated , unsheathed, stranded copper conductor of size 1x4 Sqmm as earth continuity conductor complete all as specified and directed. Make of cable: Havells/Polycab/L&T, Make of conduit: Finolex/Polycab/Supreme
Supplying,laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 V grade with stranded aluminium conductor of size 6.0 sqmm 2 core complete all as specified & directed. Make of cable: Havells/ Polycab/Gloster.
S&F MCB distribution board SPN, 240 volts, 4 ways ,powder coated, CRCA steel sheet constructed as per IS : 8623-1 &3, degree of protection IP 43- IK-09 without busbar complete all as specified & directed.
S & F MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 32 amps complete all as specified and directed. Make - Indoasian/Legrand/Havells as approved.
S & F MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete all as specified & directed. Make- Indoasian/Havells/Legrand as approved.
Earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.
M/S Anil kumar
AKANSHA.ASSOCIATES
Bedi Refrigeration Works
Sharda Enterprises
Amit Associates
M/S PUNDIR BUILDERS
Gaur Construction Co
UNOQ Private Limied
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .