Construction of 50 bedded Hospital at Farukh Nagar in District Gurugram (Pdg. 11/.433 KV Substation and DG set only).

Amount

Providing and fxing hard drawn steel wire febric 75 mm X 25 mm recangular mesh with 3.25 mm dia wire fxed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fxed with machine screws welded complete in all respect.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge

Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages.

Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.

Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire satisfaction engineer in charge of the work (size 6'x4' made of GI pipe 32mm dia).

Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

Extra for using salt and char coal/coke for pipe earth electrode as required.

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core

240 sqmm to Cable 3 to 3½ Core

300 sqmm to 400 sqmm Cable 3 to 3½ Core

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia

DWC/HDPE pipe 180/150 mm outer dia/ inner dia

Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om)

250 KVA DG Set

Supplying, fixing, testing and commissioning of condenser water pipes/ non insulated chilled water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect 250 mm dia

Extra for Supplying and fixing of insulation on following nominal dia pipes with FR quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500 g polythene faced hessain and then applying 0.6 mm aluminium sheet cladding complete with feltstrip at joints repairing etc. as per specifications and as required complete in all respect. (25% of item 25.1. as per item 25.2)

NS items Supply, erection, testing , commissioning and installation of 250 KVA 3 phase 415 volts "Liquid cooled" electric start, factory assembled, Diesel Generating set as per I.S 10002/1960 and B.S 649 or the latest I.S specification confirming to BEE 3 star rating along with instrument panel1500RPM and other standard accessories as supplied by the manufacturers but at least having following items / requirement / specifications Confirming to applicable emmision norms and confirming to BIS 10000 / I/L or BS 5514.ENGINE Engine should be of 1500 RPM cold start, compression ignition "liquid cooled" diesel engine, complete with 12/24 volts electric starting arrangement capable of running 250 KVA continuous A.C. power under NTP condition suitable for10% over load for one Hr. in 12 Hrs. running, consisting all standard accessories as supplied by the manufactures but at least including following of makes Cummins, Greaves Cotton, Kirloskar, Ruston. with electronic Governor DI or CRDI. other specifications as per DNIT in Pdf.

S/I/T/C of DG exhaust pipe sport structure made of Angle iron 100x50x6 duly groted in RCC foundation (the design of structure will be got approved from structure design consultant before fabrication / installation) Complete structure duly painted in all respect including cost of foundation and erection. Make Tata / Jindal / SAIL

S/I/T/C of SS bellow for DG exhaust system 200 mm dia complete with necessary inlet and outlet connection duly sealed complete in all respect.

S/I/T/C of 11 kv 630A 21KA 3 way Outdoor Non Extensible Fixed (IP 54), Ring Main Unit Consisting of 1 nos. manual Load Break switch and 2 nos. manual SF6 insulated Vaccum circuit Breaker having following feature: All live parts Cu bus bar, VCB will be enclosed in a manually/TIG welded, of thickness 2.0 mm, stainless steel tank grade 441/304 enclosure filled with SF6 gas at suitable pressure. Make Schneider, ABB , Siemens. other specifications as per DNIT in Pdf.

Supply, Erection, testing and commissioning of Crompton/ Schneider / ABB / Siemens / voltamp / Kirloskar make/ Transformer-500 KVA 11/0.433 K. V.3 Phase-50 cycles copper wound outdoor type as per latest IS specification efficency level 3 confirming to IS 1180 and IS 2026 with losses at 50% load 1354 W, 100% load 3909 W duly laid on existing foundation at site of work, along with petty works required up to the entire satisfaction of the Engineer-in-charge of work as per detailed specification given as under: No. load voltage ratio 11/0.433 K V. No. of Phase = 3 Frequency cycles = 50HZ Type- double wound core type copper wound Cooling = ONAN Duty = Outdoor Vector group/ISS-DYN 11 Tapping on HV Compensation +5.0% To - 10% in steps of 2.50%. Temperature rise (oil/Res = 0C) 40/45 C Attitude= upto 1000metres above M.S.L. Fitting/Accessories Provided. Bucholez relay with alarm and trip contact. OFF LOAD TAP CHANGER Externally hand operated. Oil conservator with Filling hole & cap. Plain oil level guage with minimum Level marking. other specifications as per DNIT in Pdf.

Supply, installation, testing and commissioning of Main LT Panel powder coated of Siemens grey or of approved colour compartmentlised cubicle MV Panel confirming to IEC 61439-1&2, Rated Impulse Voltage- 12 kV fabricated out of CRCA sheet 2/1.6mm steel with chemical wash after 7 tank process and suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply. The panel shall be indoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary handles for MCCB's complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling electrical interlocking as per specification and suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required.A separate earth bus bar of size as per transfarmer load to be provided throughout the length of the panel. The panel should be complete with both Electrically & mechanically interlocking fool proof system. The Panel should be extendable type. other specifications as per DNIT in Pdf.

Supply and erection of stay set with stay wire suitable for 9M long PCC pole made out of 7/3 SWG GI wire with U type M.S. Rod 5/8" dia duly threaded by means of angle iron of size 50 x 50 x 6 mm x 30 cm 6 feet long M.S. Rod buried in ground after fixing with cross channel size 75 x 40 x 6 mm x 60 cm long the stay wire will be binded on the top of the pole with help of suitable size of double U type M.S. Clamps and stay fixed with nuts and bolts the stay wire shall be insulated in the middle point with the help of egg insulator including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. (Make and specification as per UHBVNL/DHBVNL) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1 :3:6) layer on top with including excavation and refilling etc as required (As per HSR 24.4.10.4.) Above 8.0 metre and up to 11.0 metre.

Supply & Erection of rubber mat of size 1Mx2 M X 12mm thick suitable for 11 KV ISI marked complete in all respect upto the entire satisfaction of the engineer In-charge of the work.

Supply & erection of fire extinguisher ISI marked Co 2 type 4.5 Kg. Capacity as Per ISI 7285 duly erected on wall with hook including the cost of hook, screw etc. with all the labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer In charge of the work. Make: Ajay, Zenith, Minimax.

Supply & Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire' as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire \satisfaction of the Engineer m charge of the work

Supply and erection of ACSR conductor (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work. ACSR Cond. 50 Sqmm (Make and specification as per UHBVNL/DHBVNL).

Supply, stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/DHBVNL) (It is 0.10 Km in Quantity)

Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Providing and fixing of Nut & Bolt of size as per ISI specification of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 100x50mm 13.200 Kg complete in all respect . (Make and specification as per UHBVNL/DHBVNL)

Supply & erection of 11KV GI pin insulator with pin Rashtriya / Jayshree / BHEL make with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL/DHBVNL)

Supply & erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per UHBVNL/DHBVNL)

Supply Erection Testing & Commissioning of 11kV indoor HT metering panel indoor / outdoor complete with C.Ts P.Ts Cubical .as per requirement / approved by DHBVNL consisting of the following. - Cubical panel free standing floor mounting type made out of sheet steel 16 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVNL. - 3 Nos. 11KV CTS of rating as approved by DHBVNL for indoor installation of approved make of DHBVNL. - 1 Nos. 11KVPTS 11000/10 VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of DHBVNL. The cubical panel will be completed in all respect including inter connection, internal wiring with PVC copper cable, modem & allied accessries its testing and approval of all item by DHBVNL cost of all testing/ approval charges or all items of DHBVNL with a guarantee of one year from the date of commissioning. including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work

Supply & Erection of Digital Electronic Trivector Meter 3 phase 4 wires 0.5 accuracy for recording reading in KWH / KVARH / KVAH of make and rating approved by DHBVNL with push button display operating system for different kind of readings suitable for dual metering including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work. (Make and specification as per UHBVNL/DHBVNL)

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work (Make and specification as per UHBVNL/DHBVNL)

Providing and fixing of 11 KV oil cooled CT/PT combined unit ratio 40/5 A.C 0.5 (5) VA 5 and PT ratio 11/110 volt AC 0.5 VA / 0 along with metering cubical etc. fixing on H. pole metering cubical wiring with plate form required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work as per approved make of UHBVNL for dual metering. (Make and specification as per UHBVNL/DHBVNL)

Supply & erection of lighting arrestor model ALPRO / Alastem / LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resitar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply and erection of under ground cable in pipe/ existing open / closed trench complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 50 Sq. mm 3.5 Core armoured aluminium Cable.

240 Sq. mm 3.5 Core armoured aluminium Cable.

300 Sq. mm 3.5 Core armoured aluminium Cable.

400 Sq. mm 3.5 Core armoured aluminium Cable.

Supply and erection of under ground cable on surface/ cable tray etc. complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 50 Sq. mm 3.5 Core armoured aluminium Cable.

240 Sq. mm 3.5 Core armoured aluminium Cable.

300 Sq. mm 3.5 Core armoured aluminium Cable.

400 Sq. mm 3.5 Core armoured aluminium Cable.

S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid underground duly covered with sand and brick including digging and refiling of trench with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work as required up to 120 sqmm 3 core XLPE Cable (As per HSR 24.3.1 Make RR / Havells / Polycab. 120 Sq. mm 3 Core Cable .

S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work including Laying and erection of XLPE II kv HT aluminium conductor armoured cable ISi mark laid on surface/ pipe/cable tray with all labour and material as required up to 120 sqmm 3 core XLPE Cable (As per HSR 24.3.2 Make RR / Havells / Polycab. 120 sqmm 3 core XLPE Cable

Providing and fixing earth bus of 50 mm x5 mm copper strip on surface for connection etc. as required.

KKM Engineering Solutions Pvt. Ltd.

Highlight Associates and Contractors