Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹14.5 LAdmitted-Finance B 1015 GREENFIELD COLONY SECTOR 42 FARIDABAD HARYANA 121010 | FARIDABAD | HARYANA | 121010 | -30.10% | ₹14.5 L | L1 | Admitted-Finance |
| 2 | L2₹14.9 L+₹43,645.92 (3.02%)Admitted-Finance | -27.99% | ₹14.9 L+₹43,645.92 (3.02%) | L2 | Admitted-Finance |
| 3 | L3₹16.6 L+₹2.1 L (14.5%)Admitted-Finance | -19.95% | ₹16.6 L+₹2.1 L (14.5%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical DOCUMENTS NOT FOUND AS PER NIT |
| 5 | Rejected-Technical | - | - | - | Rejected-Technical DOCUMENTS NOT FOUND AS PER NIT |
Tender Value
₹20.7 L
EMD Value
₹41,371
Closing Date
13 Jun 2026, 11:30 amClosed
2IC WORKS
2IC WORKS OFFICE PUSHPA BHAWAN NEW DELHI
Renovation of IWC and GOs section at Pushpa Bhawan under FHQ BSF New Delhi
2026_BSF_911802_1
18/NIT/FHQ/BSF/26-27
Open Tender
Civil Works
Percentage
60 days
C BLOCK IWC AND GOS SECTION BSF PUSHPA BHAWAN
AS PER NIT
12 documents required · 12 mandatory
₹0
₹41,371
24 Jun 2026
6 Jun 2026
15 Jun 2026
6 Jun 2026
13 Jun 2026
6 Jun 2026
6 Jun 2026 - 13 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SH:-Civil Work | - | - | - | - |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions Engineer-in-charge. | 21 | cum | 494.1 | ₹10,376.1 |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). | 0.29 | cum | 11,505.5 | ₹3,336.6 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers | 4.66 | sqm | 736.4 | ₹3,431.62 |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 34.8 | kg | 107.85 | ₹3,753.18 |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) | 46.52 | sqm | 1,123.8 | ₹52,279.18 |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm | 2.72 | sqm | 3,848.7 | ₹10,468.46 |
| 8 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work . | 15.6 | mtr | 510.95 | ₹7,970.82 |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 16.8 | sqm | 3,167.95 | ₹53,221.56 |
| 10 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 8 | each | 1,124.85 | ₹8,998.8 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
GOANDIWC.pdf
Tender Documents • 0.94 MB
notice.pdf
Additional Documents • 0.75 MB
BOQ_958276.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .