SPECIAL REPAIR/REPLACEMENT OF LT PANELS AND CONNECTED WORK AT AF STN BKT

Amount

Taking down the existing unserviceable LT panel board/ LT feeder pillar box complete with MCCB & switch fuse unit of any capacity and size including bus bar ,ammeters, voltmeters etc after disconnecting all cable connection complete all as specified and directed.

M&L earthing complete with GI earth plate electrode 600mm x600mm x6mm thick buried in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected with GI earth strip 25mm x 3 mm and GI bolts, nuts, etc and protected by GI pipe light grade 40mm bore and 20 mm dia GI tubing light grade with funnel for watering, connecting to test point, all as shown in electrical plate No.3 of SSR Part I including necessary earth work and excavation in any type of soil, PCC earth chamber with RCC cover slab, salt, charcoal and MS hook, and provn of test point complete. NOTE : GI strip 25x3mm upto 7.5 Mtrs shall be included in quoted rates

Excavation in trenches in any type of soil n.exc 1.5m wide and not exc 1.5m in depth and getting out for cable etccomplete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers of 25cm in thickness in any type of soil complete all as specified and directed.

Removing of excavated soil to a distance not exc 50m and depositing where directed at a level n. exc 1.5m above starting point complete all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable across the trenches complete all as specified.

M&L for dry river sand cushioning in trenches for protection of LT under ground cable including watering and consolidation etc complete all as specified. (Note:-Punned thickness of sand will be measured for payment )

Taking up old Unserviceable LT UG Cable of any size and capacity.

Supply, laying & testing cable XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 120 sqmm 3.5 core complete, laying on surface of wall / trenches / pipes all as per site requirement complete with connecting acessories all as specified and directed. Make:- Grandlay/Finolex/Havells

Supply, laying & testing cable XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 240 sqmm 3.5 core complete, laying on surface of wall / trenches / pipes all as per site requirement complete with connecting acessories all as specified and directed. Make:- Grandlay/Finolex/Havells

Supply, laying & testing cable XLPE insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade cross sectional area 70 sqmm 3.5 core complete, laying on surface of wall / trenches / pipes all as per site requirement complete with connecting acessories all as specified and directed. Make:- Grandlay/Finolex/Havells

Supply and laying GI tube light grade 80 mm bore for cable protection all as specified and directed

Supply and laying GI tube light grade 40 mm bore for cable protection all as specified and directed

M&L for drilling hole under hard standing /road in different location as per site requirement (between 03 mtr to 12mtr maximum length) for laying of cable / GI tubing etc without disturbing the existing road / hardstanding and making good the disturbed surface if any complete all as specified and directed

Industrial Traders