REPAIR AND MAINTENANCE OF PIPE LINE, EXTERNAL WATER SUPPLY AND ALLIED WORKS AT DHAR ROAD UNDER GE (ARMY) DHAR ROAD

Amount

Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated material n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Taking out old existing GI water tubing lines and connected unserviceable pipe and fitting includidng segregation of serviceable pipe and fittings and keep in safe custody and reuse serviceable pipe line and fitting from trench/ in ground/under road /under PCC path etc the site of work complete all as specified and as directed of the following bore sizes :- Note : Earth work will be measured and paid for separatly under respective items of BOQ.

(a) 100mm dia

(b) 80 mm dia

(c) 50mm dia

(d) 40mm dia

(e) 25mm dia

(f) 20mm dia

(e) 15mm dia

Relaying/ refixing of old serviceable GI pipe and connection as obtained from item No 4 here-in-before with running GI fittings, cleaning of pipe internally and externally complete all as specified and directed of the following bore sizes :- Note : New fittings (Medium grade) shall be provided

(a) 100mm dia

(b) 80 mm dia

(c) 50mm dia

(d) 40mm dia

(e) 25mm dia

(f) 20mm dia

(e) 15mm dia

M&L for GI water tubing medium grade and laid in trenches/floors with running fittings complete all as specified and directed of following sizes :-Make of GI Water Tubing medium grade - TATA/JINDAL/PRAKASH SURYA/BST, Make of GI fittings- Only ISI marked fittings.

(a) 100mm dia

(b) 80 mm dia

(c) 50mm dia

(d) 40mm dia

(e) 25mm dia

(f) 20mm dia

(g) 15mm dia

M&L for GI water tubing medium grade fixed on walls or laid in floors of following sizes incl making good the disturbed surfaces complete all as specified and as directed :- Make of GI Water Tubing medium grade - TATA/JINDAL/PRAKASH SURYA/BST, Make of GI fittings- Only ISI marked fittings.

(a) 100mm dia

(b) 80 mm dia

(c) 50mm dia

(d) 40mm dia

(e) 25mm dia

(f) 20mm dia

(g) 15mm dia

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.to following bore of sizes including dismantling of old GM gate valve (Make : Kilsokar/Leader/Zoloto)

(a) 50mm dia

(b) 40mm dia

(c) 25mm dia

(d) 20mm dia

(e) 15mm dia

Taking down and refixing of old serviceable gate valve in any loc of any make including dismantling of existing ones complete all as specified and as directed by Engineer-in-Charge of following sizes :-

(a) 50mm dia

(b) 40mm dia

(c) 25mm dia

(d) 20mm dia

(e) 15mm dia

Taking down old unserv flanged joints 150/100/80 mm bore complete all as specified and as directed.

M&L GI flanged joint 150 mm bore 6/8 holes with rubber packing ring using suitable size nuts, bolts and washers, welding work complete to join two pipes all as specified and as directed .

All as per item Srl No 11 above but of size 100 mm dia complete all as specified and as directed.

All as per item Srl No 11 above but of size 80 mm dia complete all as specified and as directed.

Taking down old unserviceable sluice valves of sizes 150/100/80 mm complete all as specified and as directed.

S&F in replacement of double flanged sluice valve of size 150 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet, nuts, bolts and washers complete all as specified and as directed.

S&F in replacement of double flanged sluice valve of size 100 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet, nuts, bolts and washers complete all as specified and as directed.

S&F in replacement of double flanged sluice valve of size 80 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet, nuts, bolts and washers complete all as specified and as directed.

Taking down old unserviceable MS pipe 150/100/80 mm bore dia complete all as specified and as directed.

M&L for MS black pipe 150 mm nominal bore, medium grade 'B' class for water alongwith joints of ends by welding /flanged etc or other jointing materials and confirming to IS 1239 Part I in any length for classification complete all as specified and as directed . Make -TATA/JINDAL/PRAKASH SURYA/BST

All as per item Srl No 19 above but of size100 mm bore complete all as specified and as directed . Make -TATA/JINDAL/PRAKASH SURYA/BST

All as per item Srl No 19 above but of size 80 mm bore complete all as specified and as directed . Make -TATA/JINDAL/PRAKASH SURYA/BST

M&L construction of brick masonary valve pits of size 600x600x600 mm internal dimension with brick work in cement mortar 1:4 including excavation and earth work, concrete work, 3mm thick MS sheet cover with locking arrangement, hinges and handles, rendering 15mm thick in cement mortar 1:4 internal and external, painting to all steel surfaces with two coats of red oxide primer complete including demolition of existing damaged valve pit complete all as specified and as directed.

M&L construction of brick masonary valve pits of size 1200x1200x1200 mm internal dimension with brick work in cement mortar 1:4 including excavation and earth work, concrete work, 3mm thick MS sheet cover with locking arrangement, hinges and handles, rendering 15mm thick in cement mortar 1:4 internal and external, painting to all steel surfaces with two coats of red oxide primer complete including demolition of existing damaged valve pit complete all as specified and as directed.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 30 cm in depth for passing of pipe line and making good of disturbed surface to match with the existing surfaces by using new material i.e bitumen, aggregate complete incl compaction of cutting portion and making good all as specified and directed

LUXMI ELECTRONIC WORKS

S S BUILDERS

DAVINDER SINGH