GE(S) BTD 48 OF 2024-25 SPECIAL REPAIR WORK OF REISENTIAL QUARTER NO P 704 1 4 P 25 1 4 OF DEPOT UNDER AGE BR II AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made soild PVC moulded door shutters , 28 to 30 mm thick with 2,4,6 raised panel designed with 2mm thick moulded PVC Sheet on front face & 2mm plain colour PVC Sheet On back face incl particle Board core complete all as specified and directed

Aluminium anodised 100 mm long, Butt hinges type B-21 with galvanised mild steel screws complete all as specified and directed.

Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

S&F Factory made pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) complete all as specified and directed.

S&F Pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) complete all as specified and directed.

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

S&F 35 mm thick Flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 2nd class hardwood factory made glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc. complete all as specified and directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

M&L 18/19mm thick both side prelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified and directed.

M&L 150mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawan steel spring fixed in floor all as specified and directed.

S&F Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed.

All as per item No. 24 but pin head type, figured glass complete all as specified and directed.

S&F Framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, hand wash basin, cooler stand etc complete all as specified and directed.

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint including preparation of surface complete all as specified and directed.

M&L Preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish from the site as directed complete all as directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge. (b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (b) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces Note : HS Power Plasticizer (Consumption :0.10 kg per Bag of Cement )

Supply only liquid water proofing compound ISI marked confirming to IS 2645 - 2003 all as specified.

M&L PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removing rubbish from the site complete all as directed.

M&L PCC (1:3:6) type C-2 using 40mm graded aggregare 75mm thick as in plinth protection complete all as specified and directed.

M&L PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified and directed.

Roughning of surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

M&L 15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified and directed.

M&L Vitrified tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors etc complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile finish etc complete all as specified. Note :- Rendering will be done in coarse sand (Toka sand) only complete all as specified and directed.

M&LGlazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Marble work (Udaipur green slabs) 15 to 18 mm thick (table rubbed and polished) as in cooking platforms and provide hole for gas pipe like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges over screed bed etc complete all as specified and directed.

M&L Pre-polished kota stone 20-25mm thick as in flooring, cills and stair case over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete all as specified and directed.

M&L Pre-polished kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

S&F PVC connection 15 mm size of length 600 mm with PTMT nuts of approved quality complete all as specified and directed.

S&F15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed.

S&F Brass chromium plated shower rose 125 mm size with arm and with or without swivel joints to steel pipe or union in repair complete all as specified and as directed.

S&F 15 mm bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc in repair complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20 mm dia, D-type, 60 cm long between flanges in repair complete all as specified and directed.

S&F Chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F 15 mm bore fancy type chromium plated bib taps cast copper alloy screwed down, screwed for iron pipe, or for brass ferrule in repair complete all as specified and as directed.

S&F Brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F Stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS sheet of 1mm fixed on wall etc complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CP brass waste fitting overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.

S&F 25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. (Note: The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.)

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 16 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down old pipes of 15mm bore of any description complete all as specified and directed.

S&F 20 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down of old pipes of 20mm bore of any description complete all as specified and directed.

Taking down rain water pipe and eaves gutters, any size and pattern including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps of F1 25x2mm complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.

All as per item No 66 above but refixing 20 mm dia, old steel tubing and connections in new or old position wall, ceiling and floors etc complete all as specified and directed.

S&F pvc swr cowls 100 mm complete all as specified and directed.

S&F 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Vitreous China squatting pan of Orrissa pattern of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor in repairs complete all as specified and directed.

S&F PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.

S&F Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm groves in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

S&F Wash hand basin (in new position) of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete all as specified and directed.

Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

S&F in 110mm dia Pvc SWR Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F 75 mm dia Pvc SWR Pipes single socketed in any length with rubber ring joints fixed to walls and fixing with clamps complete all as specified.

S&F 110 bore, PVC SWR bends Juction , Tee and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F 75 bore, PVC SWR bends Juction , Tee and Y (any radius),, diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F 110mm dia of long neck PVC Swr floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

S&F 75mm dia of long neck PVC Swr floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

S&F Branch pieces,PVC SWR single 110 mm bore, equal or unqual, as in repairs complete all as specified and directed.

S&F Branch pieces, pvc SWR single 75 mm bore, equal or unqual, ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed.

S&F Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complet all as specified and directed.

Extra Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed.

Extra Joints over cast iron pipe of 75 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed.

M&L Providing, precast cement concrete type B1 1:2:4 (20 mm graded aggregate) as in manholes covers, Kitchen sink slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directedand M&L For Making Slope PCC (1:2:4) type B0 using 12.5 mm graded aggreegate for maintain slope at roof complete all as specified and directed.

Cleaning of old Roof / wall concrete surfaces & repairing the surface irregularities like cracks, potholes, as per manufacturers method statement. (a) Making V-grooves with cutter, hammer,chisel upto 5- 10mminbetweenthecementtilesandfillingwill bedone with HS latex putty and HS PU sealant. (b) Exposed Roof&Walls Supply and apply PU based waterproofing and heat reflecting system having following key performance properties: (i) UVresistant and resistant to yellowing and weathering (ii) Highly elastic and crack bridging (iii) Non-toxic and VOC complaint water based coating (iv) One component ready to use (v) Excellent adhesion on porous and nonporous substrates (vi) Seamless water proofing membrane Water vapour permeable Material shoud have below properties Solid content -60% ( ASTM D 1644) dnsity(gm/cc)-1.30 (ASTM D1475) Elognation-350% (ASTM D 2370) Tensile strength N/sqmm-2.8-2.9 (ASTM D 2370) Solar reflective index -100 according to ASTME1980 System: Providing and applying primer over the prepared surface with Homeshield PU rooKoat Firstcoat:Material:Water=1:1 by weight Total thickness: ~~0.4 – 0.5 mm (Consumption: 0.25 kg/m2.) Reinforcement: Glass fiber mesh second coat: Homeshield PUroofKoat (Consumption : 0.5 kg/m2.) Third coat:Homeshield PUroofKoat (Consumption: 0.5 kg/m2.) Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during applicationshouldbesuppliedbysinglemanufactureras a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.

Taking down Cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on internal surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar in 1:4 on external surfaces of concrete surfaces even and smooth without using extra cement & with using integral water proofing compound (as per manufacturer's instructions) complete all as specified and as directed. (Note: WPC shall be measured and paid for separately)

M&LRendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and as directed.

Demolition of brick work of any type built in cement mortor in any condition etc complete all as specified and directed.

M&L Brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and as directed.

Demolition of RCC of any description such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed. (Note: Reinforcement cut as required to facilitate demolition)

M&L Reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacity and removal from site all as specified and directed.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.

Complete removal of existing treatment on Old Internal wall surfaces of any desciption, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and applying the following :- (a) M&L for wall care putty in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint as directed complete all as specified (b) M&L for two coat of Plastic Emulsion Paint of approved tint over a coat of primer on old prepared surface by using Airless spray complete all as specified.

Preparation of New plastered Internal wall surface complete all as specified complete all as specified and applying the following:- (a) M&L wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) M&L two coat of Plastic Emulsion Paint over a coat of chalk whitening priming by using Airless spray complete all as specified.

M&L for Applying three coat of white wash on prepared surfaces of new plastered surface of wall etc complete all as specified and directed.

M&L Applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified and directed.

Complete removal of existing surface finishes of ceiling and applying two coat of white wash on old plastered ceiling surfaces etc complete all as specified and directed.

Preparation of New external plastered wall surface complete all as specified complete all as specified and applying the following:- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of exterior acylic emulsion by using Airless spray and incl a coat of acrylic emulsion external primer complete all as specified.

Preparation of old steel surfaces of any description over 10 cm width or girth and applying One coat of synthetic enamel paint on existing steel surface complete all as specified and directed.

S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified.

S&F Rubber sheet 50mm wide and not less than 3mm thick fixed with stainless steel screws at the bottom of the door shutters complete all as specified.

S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified.

M&L Powder coated aluminium frame for windows with one or more rebate including making holes and providing packing(plastic sleves to hold bar within frame) for MS guard bars within the frame (from end to end), including cleat for fixing etc complete all as specified and shown in drawing.

M&L Powder coated aluminium window and ventilator shutters( sash and wire gauge shutter), top hung/side hung type, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws, powder coated aluminium fittings such as hinge type B-21 100mm long (2 Nos), suitable handle (1 No), tower bolt 100mm (2 Nos), stay (1 No ) for side hung shtter and 2 spring latches for top hung shutters each, complete all as specified and shown in drawing.

S&F'50mm low density poly ethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed to walls, ceilig or in floors etc complete all as specified and directed.

S&F 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as spedifed and directed.

S&F SFRC (Steel fibre Reinforced concrete cover & frame ) HD-20mm graded rectangular. Internal Size 590X590mm & External size of frame 800X800X100mm including Manhole cover having size 590X590X50mm thick and fixed over existing manhole after demolition of PCC coping & manhole Cover & set in CM 1:4 including PCC benching in (1:2:4) and finishing smooth complete all as specifed and directed.

S&F Brass chromium plated wall mounted tooth brush holder of Make Jaquar or equivalent complete all as specified and directed by Engineer-in-Charge.

Carefully chipping, removing existing loose/ damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer/ chipper without damaging the existing sound concrete and exposing old reinforcement upto 10mm beyond corroded reinforcement bars using electrically operated diamond concrete saw blade, making the edges straight and even and cleaning it by wire brush and then by air blower complete all as specified and as directed by Engineer-in-charge.

Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement : per sqm of breaking area of concrete only.

Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement: per sqm of application area of concrete.

Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed by Engineer-in-charge.

Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and as directed by Engineer-in-charge.

All as per BOQ Srl item No 126 here-in-above but for each additional 10mm uniform thickness for subsequent layers.

S&F Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Bell/Buzzer point controlled by one push button with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit all as specified.

One light point controlled by two two way switch. with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

Note for serial item No 130 to 136: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, one module, complete all as specified.

S&F Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

S&F Switch modular type single pole, two way, 6 Amp, one module, complete all as specified.

S&F Socket outlet modular type, multipurpose, 3 pin, single pole one way, 6 Amp, two module, complete all as specified.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified.

S&F Bell push switch modular type single pole one way, 6 Amp, one module, complete all as specified.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S&F call bell ding dong type AC 230 V complete, Make-Anchor, Havells

S&F sub main two single core PVC copper conductor unsheathed wire multi stranded 4.0 sqmm including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 4.0 sqmm copper conductor single core wire connected by common earth all as specified. Including 20 mm dia concealed PVC conduit, medium grade, ISI marked.(Note :- two lengths of 4.0 sqmm cable and one length of 4.0 sqmm earth cable along with 20 mm dia concealed PVC conduit, medium grade, ISI marked will be measured as one running length)

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6.0sqmm including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 6.0 sqmm copper conductor single core wire connected by common earth all as specified. Including 20 mm dia concealed PVC conduit, medium grade, ISI marked.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable along with 20 mm dia concealed PVC conduit, medium grade, ISI marked will be measured as one running length)

Dismentaling and taking down carefully MCB Distribution boxes including MCBs/isolators of any type and model complete all as specified and directed

S&F MCB 6-32 Amp SP 10 KA ‘B’ series complete all as specified

S&F MCB 20-32 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40/63A AC type 10kA Four pole 30mA ISI marked complete all as specified

S&F sheet metal encloser double door 12 way SPN 230V ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made complete all as specified and directed

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one double pole MCB 20Amp complete all as specified and direcetd

S&F in replacement sheet metal encloser double door 4 way TPN 415V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F wall mounted LED batten fitting complete with one LED tubelight 1X20 watt, 6000K, 4 ft complete with decorative LED lighting fixture with extruded polycarbonate enviroment friendly, energy efficient complete with all light fittings connection all as specified and directed.

S&F wall mounted LED batten fitting 1X10 watt, 6500K, 2 ft complete with decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviroment friendly, energy efficient complete with all light fittings connection all as specified and directed.

S&F decorative wall light fixture(CITY-2 of make havells or equivalant make) made of polycarbonate suitable for retrofit 10W LED lamp(base B-22) complete with & including one lamp 10W LED lamp(base B-22), 6500K, complete all light fittings connection all as specified and directed.

S&F angle lamp holder polycarbonate type with back plate

S&F LED 7W Lamp base B-22 complete all as specified.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed

S&F ceiling fan 1200mm sweep, 5 star BLDC, minimum speed 350 RPM, Min air delivery 210 CMM with service value 6.00 BEE , corrosion resistant high performance with powder-coated set of 3 blades, 100% copper motor, with set of 2 canopy, 1 down rod, 1 shackle assembly, 1 fan regulator capacitive type and accessories complete all as specified and directed

S&F Heavy duty metal body exahust fan of 300mm sweep ,240 volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall complete all as specified and directed

S&F Heavy duty plastic body ventilation fan of 250mm sweep ,240 volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall complete all as specified and directed

Dismantaling of unserviceable earthing complete all as specified

M&L for earthing with galvanized steel earth plate electrode 600x600x6.3mm size burried directly in ground to depth not less than 2.25m below ground level with top edge of the plate not less than 1.5 mtr below normal ground level surrounded with char coal and common salt filling in alternative layers of 15cm thick and connected to GI earth wire 4mm dia by means of nuts/bolts and washers etc made out of galvanized iron including 15mm dia GI pipe light grade for protection of earth wire from earth to distribution board 20mm dia GI pipe medium grade connected to funnel heavy wire mesh for watering purpose including necessary excavation and earth work PCC (1:2:4) type B1 for contrite pit 10mm thick PCC slab cover frame all as specified and shown in electric plate Nos 3/ SSR Pt-I and testing on completion

Taking down carefully existing ceiling fans 1200mm/1400 mm sweep from qtrs, deposite safely to E/M yard store, complete all as specified and as directed.

Taking down carefully existing meter board and electric/electronic meter from qtrs, deposite energy meters safely to E/M store complete all as specified and as directed.

Refixing and connecting energy meters retrived under item no 32 of BoQ including making electric connection complete all as specified and directed

JAGMEET SINGH CONTRACTOR (BID ID -3182563)

M/s Balvinder Singh Engineer and Contractors (BID ID -3182826)

M/s Kamal Builders (BID ID -3182880)