GE/H-10/2020-21

Amount

Taking up or down 125/150 mm bore MS pipe including its insulation PUF slab and GI cladding of any discription and from trenches/wall surfaces or in any position complete all as directed.

All as per item No 1 here-in-above but bore of Pipe 100 mm.

All as per item No 1 here-in-above but bore of Pipe 80 mm.

All as per item No 1 here-in-above but bore of Pipe 40/50/65 mm.

All as per item No 1 here-in-above but bore of Pipe 32 mm.

All as per item No 1 here-in-above but bore of Pipe 25 mm.

All as per item No 1 here-in-above but bore of Pipe 20 mm.

Supply and lay MS pipe pipe 20 mm bore heavy grade with all fittings laid in floors or fixed to walls and ceiling etc complete all as specified and directed by Engineer-in Charge. Make - JINDAL Pipes, TATA, BST, PRAKASH TUBES.

All as per item No. 8 here-in-before but for pipe size of 25 mm bore.

All as per item No.8 here-in-before but for pipe size of 32 mm bore

All as per item No.8 here-in-before but for pipe size of 40 mm bore.

All as per item No. 8 here-in-before but for pipe size of 50 mm bore.

All as per item No. 8 here-in-before but for pipe size of 65 mm bore.

All as per item No. 8 here-in-before but for pipe size of 80 mm bore.

All as per item No. 8 here-in-before but for pipe size of 100 mm bore.

All as per item No. 8 here-in-before but for pipe size of 125 mm bore.

All as per item No. 8 here-in-before but for pipe size of 150 mm bore.

M&L for Insulation of 20 mm bore M S pipe with PUF slab 30 mm thick with and including applying bituminous compound and GI cladding with 26 guage GI sheet etc complete all as directed by Engr-in- Charge.

All per item No 18 bere-in before but for 25 mm bore of pipe.

All per item No 18 bere-in before but for 32 mm bore of pipe.

All per item No 18 bere-in before but for 40 mm bore of pipe.

All per item No 18 bere-in before but for 50 mm bore of pipe.

All per item No 18 bere-in before but for 65 mm bore of pipe.

M&L for Insulation of 80 mm bore M S pipe with PUF slab 40 mm thick with and including applying bituminous compound and GI cladding with 26 guage GI sheet etc complete all as directed by Engr-in-Charge.

All per item No 24 bere-in before but for 100 mm bore of pipe.

All per item No 24 bere-in before but for 125 mm bore of pipe.

All per item No 24 bere-in before but for 150 mm bore of pipe.

S&F in repairs, cast Iron butterfly valve of 50 mm bore , ISI marked, PN - 1.6 pressure grade, having Nitrile/EPDM rubber lining, SS stem,CS/SS disc. Lever operated type, with hand wheel including all jointing material i.e, nut, bolt, washer, packing material etc, duly insulated , complete all as directed Make: ADVANCE/AUDCO/LEADER/CASTLE,NVR,ZOLOTO

All as per item No.28 but bore size of 65 mm.

All as per item No.28 but bore size of 80 mm.

All as per item No.28 but bore size of 100 mm.

All as per item No.28 but bore size of 125 mm.

All as per item No.28 but bore size of 150 mm.

All as per item No.28 but bore size of 200 mm.

S&F in repairs, non return valve PN- 1.6 IS 5312 Part -I of size 150 mm bore, both ends flanged heavy duty including packing materials, nut bolts washer etc and testing complete all as directed. Body Cover CI IS : 210, Gr. FG260. Body Rings - Bronce : IS 318 Gr. LTB2. Hinge Pin-SS ASTM A276 Type 410. Flage Drilling - IS 1538, Table 4 & 6. Make: KIRLOSKAR, LEADER, ZOLOTO,L&T (AUDCO)

All as per item No.35 but bore size of 100 mm.

S& F in repairs Poly-F Plus PB classical Belts of size B-29. Make Fenner/Dunlop or conforming to IS as approved by GE.

All as per item No. 37 but B-36.

All as per item No. 37 but B-41.

All as per item No. 37 but B-46.

All as per item No. 37 but B-56.

All as per item No. 37 but B-62.

All as per item No. 37 but B-71.

All as per item No. 37 but B-72.

All as per item No. 37 but B-73.

All as per item No. 37 but B-74.

All as per item No. 37 but B-76.

All as per item No. 37 but B-77.

All as per item No. 37 but B-80.

All as per item No. 37 but B-82.

All as per item No. 37 but B-85.

All as per item No. 37 but B-88.

All as per item No. 37 but B-90.

All as per item No. 37 but B-91.

All as per item No. 37 but B-96

All as per item No. 37 but B-116

S&F in repairs Poly-F Plus PB classical Belts of size A-19. Make Fenner/Dunlop or conforming to IS as approved by GE.

All as per item No. 57 but A.-29

All as per item No. 57 but A-31.

All as per item No. 57 but A-33.

All as per item No. 57 but A-35.

All as per item No. 57 but A-36

All as per item No. 57 but A-39.

All as per item No. 57 but A-40.

All as per item No. 57 but A-46.

All as per item No. 57 but A-52.

All as per item No. 57 but A-56.

All as per item No. 57 but A.-102

S&F in repairs 50 mm bore size gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as directed. Make KIRLOSKAR, LEADER, ZOLOTO,L&T (AUDCO),NVR

All as per item No 69 here-in-above but size 40 mm bore

All as per item No 69 here-in-above but size 32 mm bore

All as per item No 69 here-in-above but size 25 mm bore

All as per item No 69 here-in-above but size 20 mm bore

Material and Labour for dismantling of blower shaft of AHU of up to 30 TR capacity, by removing the belt and pulley, blower drum, and re-mentling the shaft and filling of metal at decayed portions including all welding, turning, polishing and other machine works required to make the shaft of required shape and size, as original, balancing the shaft and refitting in AHU including re-assembling the blower, pulley etc with and including replacement of new bearing of existing size, testing the AHU for satisfactory operation, complete all as directed.

All as per item No. 74 here-in-before but for AHU above 30 TR but upto and including 70 TR capacity.

Material and Labour for dismantling of existing Air Handling Unit of any capcity , cleaning, servicing, overhauling to all component of AHU, with and including cleaning of heating & cooling coil with caustic soda solution, including welding / brazing, wherever required to arrest leakages, cleaning of Pre-Micro Filters, replacing of vertical GI sheet supports, complete replacement of foam insulation of best quality using adhesive substance to avoid cold air leakages, fabrication of bottom GI tray of existing size with drain pane made out of 16 guage thick GI Sheets duly painted with bituminous paint over interior surface of tray, re-assembling all the dismantled components to its original position using new nut, bolt, washer and other packing material etc, with and including testing, commissioning of Air handling Unit at optimum efficiency, complete all as directed.

M& L in replacement superior quality canvas cloth with Zip, Max cross sectional area 1 sqm having depth not more than 50 cm with GI frame suitable to connect both AHU and duct including taking down of old material all as per directed.

M& L for superior quality canvas cloth with Zip, Max cross sectional area 4 sqm having depth not more than 75 cm with GI frame suitable to connect both AHU and duct including taking down of old material all as per directed.

Supply and fixing in replacement of temperature gauge bottom connected, direct mounted type, of temperature range of 0 - 100°C or 32 - 212°F, including necessary welding complete all as directed. Make : H Guru/Fiebig/Anergy/Emerald

Supply and fix in repalcement of Pressure gauge dial type range between 0 to 12 kg/cm2 with siphon assembly with on/off knob including necessary welding cutting all as per directed. Make : H Guru/Fiebig/Anergy/Emerald

M&L for Earth continuity conductor or main earthing lead fix to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fix to pole or any other indicated situation for loop earthing extra as required but size 32 x 6 mm galvanised iron strip

M&L Earthig complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised using galvanised iron strip 32x6mm as earthing lead by means of bolts, nuts, checks nuts and washers of galvanised iron of steel all as shown in electrical plate No 3 connect to earthing test point all as specified or indicated including necessary testing on completion.

M & L in replacment of unserviceable 2/3 way modulating motorized valve (glow type),GI globe body,Brass seating,SS-304 spindle ,Telflon gland,with linear movement actuator 24 V AC input supply,0-10Vinput signal with modulating thermostate & transformer of size-25 mm Model VXP 45.25 SSC 61 + ALG 253 Make:-SIEMENS/RAPID CONTROL/RAPID COOL

All as per item No 83 here-in-above but model VXP 45.32+ SSC 61 + ALG 323 size 32 mm bore

All as per item No 83 here-in-above but model VXP 45.40+ SSC 61 + ALG 403 size 40 mm bore

All as per item No 83 here-in-above but model VXF 31.5+ SKD 62 size 50 mm bore

All as per item No 83 here-in-above but model VXF 31.65+ SKD 62 size 65 mm bore

All as per item No 83 here-in-above but model VXF 31.80+ SKD 62 size 80 mm bore

All as per item No 83 here-in-above but size 5/8" bore

Supply installation, testing and commissioning of Thermostat, LCD display, with temperature display suitable for summer/winter season complete with Cotrol wiring to connect with motorized valve and LT electric Panel board all as specified and directed Make - Seimens /Honeywell /Danfoss

Taking down carefully existing false ceiling of any type / make / size including all electric fitting/fixture, fire alarm and any other accessories etc for repair/replacement of AC duct and refixing the same in its original position with out any damage complete all as directed. Note : If, any kind of damage occured to false ceiling and other services like elcetric supply cable / fitting / fixture, fire alarm, water supply line or any other services, due to negligance or poor workmenship of contractor, the same will be repaired/replaced by the contractor free of cost and no extra payment will be made in this effect to the contractor.

Supply, fixing and laying, in replacement of GI duct fabricated from 22 Guage GI Sheet of any dimension/cross-section with and including all necessary fixing arrangement and support to roof and connected accessories i. e. nut, bolts, fastener, flat iron strip, clamps etc and taking down of old duct alongwith accessories, complete all as directed. Make of Sheet - Jindal/ TATA / SAIL

S&F of thermal insulation on new / existing ducts and plenum chamber, comprise of preparation of surface and fixing of new cross linked closed cell polythene, plane, fire retardant insulation of 9 mm thick nitrile insulation with aluminium foil of the duct having a tow stable K value of 0.027-0.029 Kcal/hr/m at 0-23°C with minimum density of 33 Kg/cum, fire retardant self extinguishing on dripping, good ozone resistance, including fixing the insulation to the duct surface with help of adhesive paste and closing the gap with self adhesive tape of 3mm thick, complete all as directed. Make - TENACITY,PUROLATOR, LLYOD, MIHIR, DANFOSS,INDFOSS,KLENZOID JOHN FOWLERSARMFLEX / KFLEX /PARAMOUNT

Supply only, in replacement, of absolute HEPA Filter AAFH1 of size 610 x 610 x 300 mm having rated flow of 1700 CMH, pressure drop less than 25 mm WG and efficiency more than 99.97 down to 0.3 micron, complete all as directed. Make : Mihir/Athlete/AAF

Supply only, in replacement, of absolute HEPA Filter of size 610 x 610 x 149 mm Model-AAF1 having rated flow of 500 CMH, pressure drop less than 25 mm WG and efficiency more than 99.97 down to 0.3 micron, complete all as directed. Make : Mihir/Athlete/AAF

Supply only, in replacement, of absolute HEPA Filter of size 24 x 8 x 12 Inch box type having rated flow of 500 CMH, pressure drop less than 25 mm WG and efficiency more than 99.97 down to 0.3 micron, complete all as directed. Make : Mihir/Athlete/AAF

S&F in replacement, of Air Vent valve, 20 mm dia ISI marked with and incl all fixing accessories, complete all as directed.Make : Rapid Cool/ZOLOTO/

Taking Down of unservicable Coil with 6 Rows Deep and 2 rows heating of size 100x56 cm,100x61 cm, for Existing Air Handling unit including all welding, cutting and other machine works including re-assembling all component with new coil and testing the AHU for satisfactory operation, complete all as directed.

S&F coil with 6 Rows Deepl and 2 rows heating coil of size100x61 cm for Existing Air Handling unit including all necessary connected items as per existing sample complete all as directed by Engr-in-charge .

S&F coil with 6 Rows Deepl and 2 rows heating coil of size 100x56 cm for Existing Air Handling unit including all necessary connected items as per existing sample complete all as directed by Engr-in-charge .

S & F in replacement of ball bearing NU205EP with metal housing, complete all as directed. Make : NBC / SKF / MNR / TATA

S & Fin replacement of ball bearing P-206 with metal housing, complete for AHUs of different capacity all as directed. Make :NBC / SKF / MNR / TATA

All as per srl item No 102 here-in-above but P- 207

All as per srl item No 102here-in-above but P- 208

All as per srl item No 102 here-in-above but P- 209

S&F in replacement of ball bearing No 6201, incl dismantling of old unserviceable bearing, complete all as directed. Make : NBC / SKF / MNR / TATA

All as per srl item No. 106 here-in-before but 6202.

All as per srl item No. 106 here-in-before but 6203.

All as per srl item No. 106 here-in-before but 6204.

All as per srl item No.106 here-in-before but 6205.

S&F in replacement of Step Controller with digital display, More than 5 steps, for Hot Water Generator wall as per sample, complete all as directed. Make - Rapid cool / Honeywell/ Donfass

S&F fully reflective sign board of size 3600 x 900 mm, made out of SS sheets of 18 guage surrounded by 80mm square pipe of grade SS-304 and computer printed letters in radium material of height not exc 30 cm each of any kind like block, Roman, Italic, Indian (approx letters exc 30 and not exceeding 100 in numbers), including providing 03 Nos of LED lamp (min 10W) for reflection purpose in each sign board, fixed with SS screw on wall over entrance gate of plant or any location where directed etc complete all as directed by Engineer-in-Charge. Note : 1.The rates quoted by the tenderer are also deemed to be included for necessary scaffolding &T&P required for fixing the board on vertical wall sufaces, as per site condition and no extra cost shall be paid to the contractor on this account.

S & F of Acrylic Sign board of dimension 300mmx 300mm and thickness not less than 5 mm ,including writing letter of height not exc 8 cm each ( Approx nos of letter exc 30 and not exc 80 of any kind like block, Roma Itlalic, Indian, Stop, Commas, Short line, dashes, hypens, brackets etc as directed by Engr-in-Charge) etc complete .

M&L for applying two coats of aluminium spray paint on any kind of metal surface with and incl preparing of surface by scratching / removing rust, dust and old paints etc with wire brush, emery paper, grinder etc and making surfaces smooth for achieving better grip between surface and primer, complete all as specified and directed.

M&L for applying one coat of synthetic enameled spray paint of existing colour on steel/iron surfaces of pipes, LT panel boards etc with and incl preparing of surface by scratching / removing rust, dust and old paints etc with wire brush, emery paper, grinder etc and making surfaces smooth for achieving better grip between surface and primer, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding(but not backing) and removing rubbish off premises min 500m away from bldg complex, complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in any position and removing rubbish off premises minimum 500m distance from bldg complex, complete all as specified and directed.

Material and Labour for Cement concrete in surface channels and drains type B2 1:2:4 using 20 mm Graded Aggreagate complete all as specified.

Material and labour for machine cut kota stone flooring 20-25 mm thick of approved size over screed bed, laid and jointed with grey cemented slurry mixed with pigment to match the shade of slab including rubbing and polishing(mirror), complete all as specified and directed.

Material and labour for 20 mm thick screed bed or bedding layer in cement Mortar 1:6 for laying kota stone floor finishes, complete all as directed.

M&L for preparation of old decorated wall surfaces including washing rubbing down and stopping of distempered surfaces and applying a coat of distemper oil emulsion on wall surfaces, complete all as directed.

SANJEEV ENTERPRISES

RUCHIKA ENGG.WORKS

SNOWY ENGINEERING INC