SPECIAL REPAIR TO BLDG No. P-51 RATION STORE AND COOK HOUSE o. BC-82 AND 83 OF 15 MED REGT EM-12 FOR CEILING, JOINERY AND INTERNAL ELECTRIFICATION AND SPL RPR TO ROOF TREATMENT OF BLDG No. P-28 AND P-29 OF 1872 RKT REGT (SMERCH) WORKS AT NASIRABAD

Amount

Excavation in trenches in soft / loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc of 25 cm thick in any type of soil complete all as specified and directed.

Removal of surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M& L for 15mm thick rendering in cement mortar (1:6) on stone masonary wall surface finished even and fair complete all as specified & directed.

M&L for 15 mm thick rendering in 1:4 on stone masonary wall surfaces finished even and fair complete all as specified & directed.

Dubbing out average 10mm thick in CM 1:4 on irregular faces of wall or concrete chajjas etc complete all as specified and directed

M&L for 10mm thick rendering in cement mortar (1:4) on ceiling surfaces finished even and fair complete all as specified & directed.

Raking out joints/ pointing to random rubble or polygonal rubble stone masonry uncoursed or brought upto courses built in CM and M & L for keyed pointing in cement mortar (1:4) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including a coat of white putty complete all as specified & directed.

M & L for preparation of newly plastered surfaces of walls and applying three coat of white wash, complete all as specified and directed.

All as per above item No 11.00 here in before but on ceiling.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of wall including cornices and applying one coat of white wash complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of wall two coats of cement base paint complete all as specified and directed.

M&L for 1mm thick birla putty on wall complete all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item no 19.00 here in before but except stone. NOTE: Old serviceable stones retrieved vide Sl Item no 18.00 shall be reused.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

All as per sl item no 22.00 here in before but except brick. NOTE: Old serviceable stones retrieved vide Sl Item no 182.00 shall be reused.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping, bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed.

Dismantling stone slab in roofs, suspended floors, chhajja, landing etc any thickness, jointed in any mortar complete all as specified &directed.

M&L 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n.exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 over 25mm thick PCC 1:2:4 type B-0 (12.5mm graded aggreage) complete all as specified and directed

S&F 50mm thick sand stone slab set and jointed with CM 1:4 complete all as specified and directed

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on vertical surfaces of wall such as dados, skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed by Engineer-in-charge.

M&L for machine cut Kota stone slab flooring of size 550mm x 550mm 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Kota stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) complete all as specified & directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L 20-25mm thick black/ colour granite on kitchen platform and similar work (size not less than 900 x 450mm over and inlcuidng 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the sande of granite stone including cutting and polishing complete complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S & F plain, solid, straight chowkhats or frame of 2nd class hard wood Hollock/Bansum/Sal rebated on solid put together with pinned at joints complete all as specified and directed

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, gauged and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

Taking down of old boards and M&L 18/19mm thick block board grade-II quality enterior grade with decorative type with decorative face veneer on one face fixed complete including teak wood lipping 19x6mm thick fixed with nails in shelves, patirtion and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board and similar work complete all as specified and directed.

S & F in repair steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

S&F continuous (piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flaps (when open) complete all as spepcified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

Taking out old unserviceable steel wire cloth & S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F sheet glass, ordinary quality 4mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F figured glass pin headed type, 3mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S & F 100mm size hasp and staple, aluminium anodised, safety type, including bolt to hinge plate complete all as specified and directed

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F 125mm, single action springs hinges, mild steel with steel wire spring, stove enameled, black complete all as specified and directed.

S&F in repair fancy type aluminium curtain rods 20 mm dia powder coated complete all as specified & directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of curtain rod complete all as specified & directed.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of old surface of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

M & L in repair 40mm thick sand stone slab, set & jointed on joints in CM 1:4 including 25mm thick PCC 1:2:4 type, B-0, using 12.5mm graded crushed stone aggregate (for providing bottom cover to PVC tank) complete all as specified and directed.

S & F in repair PVC cover for PVC water tank of capacity 500/1000 ltr complete all as specified and directed.

Disconnecting existing tank of capacity 500 litre, keeping aside (or lowering if required) for repairs, cleaning etc and hoisting it required, reconnecting and refixing in position complete all as specified and directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity n.exc 500 litre each & removing from site complete all as specified and directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity exc. 500 litre but n.exc 1000 litre each & removing from site complete all as specified and directed.

S & F for rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks of 1000Ltrs capacity (cylindrical vertical with closed top), double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F in repair ball valves high pressure and of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore minimum weight 210 gms complete all as specified and directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No. 70.00 here-in-before but 20mm dia

All as per item No. 70.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 73.00 here-in-before but 20mm dia

All as per item No. 73.00 here-in-before but 25mm dia

M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.

All as per item No. 76.00 here-in-before but 20mm dia

All as per item No. 76.00 here-in-before but 25mm dia

S&F in repair bib taps 15mm bore, fancy type, long nose, cast copper alloy, chromium plated with crtuch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair stop valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long shank & cup (concealed type) screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

S&F in repair angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked screwed down high pressure with crutch or butterfly handle for iron pipe complete all as specified & directed.

S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.

Taking out old unserviceable tubular towel rail & S&F tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified & directed. Make:- Prayag or equivalent as approved by GE.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 20mm bore and fixed complete all as specified & directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 25mm bore and fixed complete all as specified & directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as spd & directed.

Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F in repair wash hand basin vitreous china white / ivory colour, flat of size 550 x 400mm complete all as specified and directed.

S & F in repair PVC waste pipe (flexible) of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc,& removing from site complete all as specified and directed.

S&F 110mm dia UPVC rain water pipe fixed to wall under walls as spout complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. complete all as specifed and directed.

S & F stack clamp out of 50mm by 5mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

S & F in repair cast iron nahani/floor trap 75mm outlet with grating including jointing to waste pipe fixed in PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified & directed.

S & F in repair grating square/round of size 125mm of PTMT with centre hole or side hole (minimum weight 40gms) complete all as specified and directed.

Taking down existing unserviceable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50mtrs complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC roof surface finished fair & even without using extra cement even complete all as spescified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.6metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M & L for coved filled in PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate at junction of roof and parapet wall / mumty / other vertical space and applying a coat of bituminous primer conforming to IS-3384 @0.30 litre/Sqm complete all as specified and directed.

M & L for 150 mm bore salt glazed stone ware drain pipe ISI Marked laid in trenches and jointed in CM (1:1) tested complete all as specified & directed.

M & L PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 150mm dia (nominal) including packing under and haunching against the size of after they are laid and tested complete all as specified and directed.

S & F rolled mild steel angle iron section of any size fixed independently with or without connecting plates or welding existing steel or iron surfaces confirming to Fe-290 (Gde E-165) quality-A complete all as specified and directed.

Dismantling of cement (corrugated or semi corrugated) sheeting, any gauge, thickness, including as in roofing covering complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest.

All as per item No. 108.00 here-in-before but except corrugated steel sheet 0.45mm NOTE: Old serviceable steel sheet retrieved vide Sl Item no 107.00 shall be reused.

Cutting holes into or through stone walls built in cement lime mortar and walls of cement concrete of superfacial area exc 150sqcm but n.exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting electric connections and taking down old unserviceable MCB SPN/SP/TP and DB's of any capacity and removing from site complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for One light point/fan point controlled by one, one-way 5 Amps complete all as specified and directed.

All as per item No. 144.00 here-in-before but One socket outlet 5 pin, 5 Amps on the same board

All as per item No. 114.00 here-in-before but One socket outlet 5 pin, 5 Amps on the independent board

All as per item No. 114.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed

S & F switch piano type, flush button, single pole, one way 5 Amps, 240 Volts, complete all as specified and directed. Make : SSK /Leader /CONA

S&F switch piano type, flush button, single pole, one way, 15 Amps complete all as specified and directed. Make : CONA / SSK / ANCHOR

S&F socket outlet 5 Amps, 3 pin, flush type, complete all as specified and directed. Make : CONA / SSK / ANCHOR

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all, as specified & directed. Make : Cona / SSK / Anchor

S & F stepped type electronic ceiling fan regulator, flush type, AC 230 volts complete all as specified and directed. Make : CONA / SSK / ANCHOR

S&F ceiling rose, surface bakelite 65 x 17.5mm, three terminal complete all as specified and directed. Make : CONA / SSK / ANCHOR

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including one LED lamp 9/11 watt complete all as specified and directed. Make for holder : Cona / SSK / Leader Make for LED lamp : Syska/ Bajaj/ Wipro

S & F LED tube light fitting retrofit including rod and fixture in acrylic linear tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar professional CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CW for rod BLRB - DB 118 for fixture, Havells cat part No LHLDDBXEUL7Z018 (for rod) LHFYBP1TB1W20 (for fixture), Syska cat part No SSK - TL-18W-I for Rod, Syska cat part No SSK-T8P-1201 for Fixture as approved by GE.

S & F LED light fittings, suitable for & including 1x(9/10) watt bulk head luminaries with connector block etc complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed. Make :- Bajaj Cat No : BIBWP 10W LED, Havells cat part No LHEOAP7UZ6W010 or equivalent make of Philips, Syska cat part No SSK -BH-9W as approved by GE.

Supply fixing testing and commissioning of energy saving street light luminiare suitable for & including 15 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate cover, complete with individual LED lenses including suitable size of street light bracket with clamp and fixing on wall complete all as specified and directed. Make :- Havells Cat Part No LHEWEBP7PL6S015 or equivalent model of Syska/ HPL/ Bajaj as approved by GE.

S & F recess mounted 2X2 luminariewith white powder coated CRCA housing with LEDs 36 watt, Squre shaped complete all as specified and directed. Make :- Bajaj Cat Part NoBZRSQL 36W GZ1 Wh , Jaguar Cat Part no. LULT or equivalent make S36X Havells/Philips, Syska cat part No SSK -PAB-6060B-36W as approved by GE.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F MCB single pole 240 volt 10KA 5 to 32 Amps confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

S&F MCB single pole and neutral 240 volt 10 KA, 63 Amps confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

S&F MCB single pole and neutral 240 volt 10 KA, 10 to 40 Amps confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with handle made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

M/S SHIVA TRADERS

M/s Jai Jinendra Constructions

M/S Bansal Construction

V K LAKWAL CONSTRUCTIONS

H M LAXMINARAIN

kirtiman traders