PROVN OF INTERLOCKING TILES IN PLAY GROUND OF KENDRIYA VIDYALAY AND TOILET AND BATHROOM BLOCKS FOR THREE TRG COYS UNDER AGE (I) AYODHYA CANTT.

Amount

Surface excavation n.exc 30cm deep and avg 15cm deep and getting out soft /loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n.exc.1.5m depth for fdn etc.and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches exc 1.50m wide and n.exc.3.0m depth for fdn etc.and getting out in soft/loose soil, complete all as specified and directed.

M/L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough finished surface of concrete, complete all as specified and directed.

Use and waste of Formwork to sides of Square, rectangular or polygonal Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed.

M&L for RCC M-25, 20 mm graded crushed stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC, M-25 20 mm graded aggregate Columns, pillars, piers,posts and struts, complete all as specified and directed.

Use and waste of flat form work Rough finished surfaces of concrete Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for RCC M-25, 20 mm graded aggregate Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250, complete all as specified and directed

M&L for TMT bars 6 to 8 mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250, complete all as specified and directed

S&F 4 mm thick figured glass, pin headed type glazed with oil putty n.exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for Brick work with fly ash bricks,old size, straight or curved on plain exc. 6 mtr mean radius built in cement morter (1:4) for wall complete all as specified and directed. Note:- Brick work shall be done using coarse sand only.

M&L for rendering 15mm thick on other than fair faces of brickwork or stone masonry surface in cement mortar (1:6) finished even and smooth without using extra cement all as specified and directed. Note:- Rendering shall be done using coarse sand only.

M&L for Rendering 15mm thick in CM 1:4 on fair faces of block work or concrete surfaces with mixing of WPC if required as per manufacturers instruction & rendering is to be finished even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured & paid under relevent item. Note:- Rendering shall be done using coarse sand only.

M&L for rendering 5mm thick in cement mortar (1:3) as in ceilling on concrete surface finished even and smooth without using extra cement, complete all as specified and directed. Note:- Rendering shall be done using coarse sand only.

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper on walls over a coat of 1mm thick wall care putty, complete all as specified and directed.

M&L for three coats White washing on ceilling including preparation of new surfaces, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a PVC sheet strio of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F aluminum anodised barrel tower bolt 150mm long of extructed section, complete all as specified and directed.

S&F aluminum anodised handle cast type 150mm, complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with gavanised mild steel hinge pin, 100mm long all as specified and directed.

S&F vitreous china washdown water closet pan (pedestal pattern) white incl seat and cover complete all specified and as directed.

S&F vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor, complete all as specified and directed.

S&F 10 Ltrs Capacity PVC valveless syphonic action type flushing cistern, low level white, with inlet , ball valve float and handle includigng brackets, complete all as specified and directed.

S&F 15 mm dia bib taps cast copper alloy with cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F for 15 mm bore dia angular, stop valves,fancy type chromium plated screwed down, high pressure, long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F PVC connection 15 MM size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 1000 ltrs rotational moulded polythene water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including all the fittings such as connection piece with GI tank nipple for inlet, outlet, washout and overflow etc all as specified in SSR Part-I complete all as specified and directed.

S&F 20 mm bore ball brass valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F 20 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 16 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & Fixing vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc,. complete all as specified and directed.

S&F for vitreous China wash basin, white, flat back, size 630 x 450 mm excl taps, waste, chain and plug and porcelain stopper but incl brackets complete all as specified and directed.

S&F 15 mm bore dia, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC towel rail 600mm long fixed with and including chromium plated brass screw and wooden/plastic clits(minimum weight 190 grms) complete all as specified and directed.

S&F 75 mm Diameter of outlet in mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed

M&L for 15mm thhick screed bed or bedding layer CM (1:6) for laying floor finishes, complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 8 to 9 mm thick ( square /Rectangular) area of each tile set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed complete all as specified and directed.

M&L for glazed ceremic coloured tiled in vertical surfaces wall cladding 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cm 1:4 on verticle surfaces of wall for fixing of wall tiles complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded aggregate) as in sub base to floor, complete all as specified and directed

M&L for hard core of broken stone of boulders of guage n.exc 63mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished concrete surface even and fair including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

M&L for returning filling in including spreading levelling,watering and well ramming in layers not exc 25cm in soft/loose soils, complete all as specified and directed.

Removing of excavated material to a distance n.exc 50m and depositing where diercted at a level n,exc 1.5m above the starting point complete all as specified and directed.

M&L for rolled section as in main and croos beams hips and jacks rafter including Angle section , pipes, channel, beam section , gusset plates etc including fixing with welding, nut bolts, clamps etc upto 8.0 m higth FE 410-W (Gde -E-250) grade, complete all as specified and directed.

M&L for preparation of new steel surfaces of any dicription over 10 cm in width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for welded steel wire fabric supplied and fixed complete to wood or steel members n.exc 4.00 kg per Sqm complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete all as specified and directed. (Glass shall be paid separately). Note::- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. all as specified and directed by Engr-in-charge.

M&L for new surface of wall and applying 1.00 mm thick wall care putty and two coat of weather proof exterior emulision(APEX of Asain paint or equivalent) on primer complete all as specified and directed.

M&L for Providing PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in coping , benching/haunching , slightly rounded or chamfred angle and throating etc complete all as specified and directed.

Supply only Water proofing compound, complete all as specified and directed.

M&L for precast RCC type B-1 1:2:4 ( using 20 mm graded crushed stone aggregate ) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in CM 1:6 including necessary form work if required, complete all as specified and directed.

M&L for MS round bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

M&L for 200 mm bore of Reinforced concrete pipes, class NP 2 with one collar per length of pipe ' laid in trenches,tested and jointed in CM 1:1 complete all as specified and directed.

M&L for concrete bed to drain pipes incl pakcing under and haunching againat the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 for 150 mm bore of pipe.complete all as specified and directed.

M&L for RCC septic tank conventional types designed to carry sewage and sludge water,excavation in any type of soil,PCC 1:4:8 type B2 using 40 mm graded stone aggregate below foundation, RCC M-30 design mix in wall,base slab,baffle wall and roof slab includeing beam etc with vent soft manhole opening with cover connection etc complete with effected depth of 1.50 mtr and over all depth 3mtr for 50 user complete all as specified and shown in drg No TD/750 sheet 1/2 to 2/2 complete all as specified and directed.

M&L for Soakage well 1.80 mtr dia and 4.50 meter effective depth excavation in any type of soil foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M-30 concrete including intercepting chamber and screen chamber made of brick masonary in cm RCC cover slab in M-25/SFRC cover interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and shown on Drg No TD/576 sheet 1/2 and 2/2 complete all as specified and directed.

M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.

M&L for 40 mm Sand filling under interlocking tile complete all as specified and directed.

M&L for machine pressed precast, prelaminated (lacqure finish) coloured concrete interlocking paver block (VIBRO COMPRESSED AND RUBBER MOULDED) any shape and size conforming to IS- 15658- 2006 of 60mm thickness, M- 35, ISI Marked, with grey cement and pigment complete all as specified and directed. Make:- Mayur tiles and interlocking pavers, Lucknow, Golden tiles Industries, Lucknow & BEE HIVE Infrastructure Pvt Ltd, Prayagraj or equivalent make specified in list of make. Note :- Necessary earth work to be maintain the level (if any necessary will be carried out without any extra cost.

M&L for PCC 1:2:4 type B1 (using20 mm graded stone aggregate) as in kerb or mud stop, rounded or chamfered on edges complete all as specified and directed.

M&L for providing and laying out at or near ground level factory made kerb stone of M-25 grade cement concrete in position to required line ,level and curvature ,jointed with cement mortar (1:3) including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm ) including making drainage opening whereever required complete all as specified and directed

M&L for point wiring for one light point/fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor,FRLS PVC insulated unsheathed cable in and including 20 mm dia or higer size PVC concealed in wall conduit and fittings with 1.5 Sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including metal flush boxes with 3mm thick plastic laminated white cover plate and making neccessory electrical connection of Switches, sockets,regulators etc all as specified.

All as per item No 73 of above but for one 5 pin socket outlet 5 amps on same board complete all as specified and as directed.

All as per item No 73 of above but for one 5 pin socket outlet 5 amps independent board complete all as specified and as directed.

M&L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including metal flush boxes with 3mm thick plastic laminated white sheet top cover complete including FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board complete all as specified and as directed.

S&F switch piano flush type one way 6 Amps complete all as specified and as directed.

S&F switch piano, flush type, one way, 16 Amps complete all as specified and as directed.

S&F socket outlet 5 pin, 6 Amp flush type complete all as specified and as directed.

S&F socket 2 in 1, 3 pin, 5 and 16 Amps flush type complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

M&L for sub main wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including concealed PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB complete all as specified and as directed. Note:- 2 x 6sqmm of submain wire and 1 x 6 sqmm earth wire and one run of conduit pipe shall be considered as one unit length.

S&F epoxy powder coated MCB, DB, double door TPN horizontal 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and as directed.

S&F MCB, TPN ,63 A, 415V 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning, complete all as specified and as directed.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and as directed.

S&F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection, complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position, complete all as specified and directed.

Supply and fixing indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making connection with three core PVC insulated copper wire of appropriate size and testing complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate,NRV, connection piece etc complete all as specified and as directed.

M&L for new earthing complete with galvanised steel earth plate electrode 600 mm ×600mm × 6mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C-1 in chamber of size not less than 300 x 300x 300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8mm dia TMT bars @ 15cm c/c both ways and angle iron 40x40x5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed by Engr-in-Charge. Note:- The unit rate including earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Supply, laying, testing and jointing galvanised steel water tubing 50mm bore with screwed socket joints medium grade together with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, connectors, back nuts, caps, wooden plugs or laid in floors including, screwing and waste for forged bends on piping as required, cutting through walls, floors and their making goods to match with the existing specifications complete all as specified and as dicrected

Supply, laying, testing and jointing galvanised steel water tubing 25mm bore with screwed socket joints medium grade together with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, connectors, back nuts, caps, wooden plugs or laid in floors including, screwing and waste for forged bends on piping as required, cutting through walls, floors and their making goods to match with the existing specifications complete all as specified and as directed

Supply and fix in repairs 50mm dia gate valve (gun metal globe valve) with iron wheel head screwed bothends for iron pipe and fixed for complete all as specified and directed. Note:- The quoted rate as deemed to be inclusive of cutting threading, insertion of union joint, nipple etc for required size of pipe.

Supply and fix in repairs 25mm dia gate valve (gun metal globe valve) with iron wheel head screwed bothends for iron pipe and fixed for complete all as specified and directed. Note:- The quoted rate as deemed to be inclusive of cutting threading, insertion of union joint, nipple etc for required size of pipe.

Supply and erect 6 mtr long hot dip galvanised octagonal pole with 130mm bottom A/F and 70mm top A/F made up of 3mm thick HT steel plate having base plate of 220x220x12mm thick alongwith single arm bracket of 1000mm length made up of 48.3x3.25mm thick plate, 4 Nos M20x700mm GI 'J' type foundation with door opening 0.90x350mm with bolts, nuts with template, bikelite sheet box with 01 No 6 Amp MCB SP stand type terminal block suitable for 4 core 16 sqmm cable complete all as specified and as directed.

M&L for RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone aggregate) of size 550mm x 550mm x 1400mm out of which 1200mm shall be below FGL (Finished Ground Level) using 04 Nos 12mm dia steel reinforcement of grade Fe-415 with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C using shuttering alongwith supply & installation of 2 Nos of 63mm dia PVC pipe for cable entry and cable exit 4 No 'J' type foundation bolts shall be anchred in the foundaion (PCD of 205mm) in such a way that 125mm length of bolt is projected above foundation. It includes water curing as required and soil excavation and backfilling. It also includes supply of all material and labour including erection of foundation at site complete all as specified and as directed.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics and equipped with IP66 protection complete all as specified and directed.

M&L for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified and directed by Engr-in-Charge

M&L for brick protection over cables inside the trench by using common burnt clay building bricks,locally available best quality complete all as specified and as directed by Engineer-in-Charge.

Horizontal boring in soft/loose soil/under roads of any width in size by mnual arrangements for inserting GI pipe upto 100mmm bore for passing cables complete all as specified and directd by Engr-in-Charge. Note: GI pipe shall be measured and paid separately.

Supply and laying galvanised mild steel pipe/tubing of the size 40mm bore, light grade complete with all fittings, laid in trenches, under roads, drain, paths, fixed to poles/walls with mild steel clamps, bolts nuts and washers complete all as spcified and directed. Note:- Excavation & Earth work, mild steel clamps, bolts, nuts and washers shall be measured and paid separately.

M/s R.S. Enterprises (BID ID -3421495)

M/S A P CONSTRUCTION (BID ID -3414975)