Ireps

Active

Goods

ELBOW EQUAL 40MM FORGED AND GALVANISED, ELBOW REDUCING 25X15MM & TEE EQUAL 32MM

Modern Coach Factory Raebareli

Uttar Pradesh

Amount: Refer DocsCloses: 10 Sept 20266d left

Timeline

Published3 Sept 2026
Closes10 Sept 2026

Tender Value

Refer Docs

Closing Date

10 Sept 2026, 2:30 pm6d left

Bidding Terms

Bidding System

Single Packet

Tender Mode

Normal Tender

Pre-Bid Conference

Evaluation Criteria

Itemwise/Consigneewise

Ranking Order

Lowest to Highest

Inspection Agency

TPI Agency

Approving Agency

Not Applicable

Offer Validity

60 days

Contract Category

Expenditure

Item Category

General

Tendering Section

Eligibility Criteria

1 condition

Special Eligibility Criteria

1
Not applicable
Confirmation required

Compliance & Declarations

32 conditions · 2 needing a document upload

Check List

1
Before Submitting the Bid, bidders are advised, in their interest, to kindly go through the CHECKLIST (that can be accessed by clicking VIEW IREPS DOCUMENT tab).
2
The bidders are advised to upload the document which are conclusively confirming to the eligibility criteria. Any ambiguous inconclusive document which could not be subsequently cleared or confirmed and the liability for the consideration of such ambiguous document shall lie with the bidder.
3
The terms and conditions of incorporated public Procurement (Preference to Make in India), Order 2017 issued by Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade) with latest revision if any as on tender opening date (TOD) shall be applicable.

Commercial-Compliance

1
The tendered item(s) fall(s) within the ambit of clause 3(a) of Public Procurement (Preference to Make in India) Order 2017 revision dated: 19.07.2024 issued by DPIIT, Ministry of Commerce and Industry. This implies that there is sufficient local capacity and competition in supply of the tendered item(s) of required quality, and therefore public procurement of the item is restricted to Class-I local suppliers only (having local content equal to or more than 50% as defined under the Para 2 of the above order) and the vendor(s), who do not qualify to be class I local supplier(s), is/are not allowed to bid in this tender and their offer shall not be considered for any ordering. In case any vendor, who does not qualify to be class-I local supplier for the tendered item, but participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor
Document optionalConfirmation required
2
HSN Code must be mentioned during quoting of tender.
Document requiredConfirmation required
3
Firm should mention place of inspection. In case of procurement from approved sources, place of inspection mentioned in vendor directory available on UVAM shall be followed
Document requiredConfirmation required
4
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional

Bid Responsiveness

1 condition

1
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

Delivery Locations

1 location across Uttar Pradesh · 5,605 Numbers total

SHELL DEPOT, MCFRBLUttar Pradesh

5605 Numbers

Delivery & Payment Terms

F.O.R

Destination

Delivery Period

For all items — Commencement : Within 1 Days of issue of Contract, Completion : Within 2 Months thereafter — Supply to start immediately and to be completed within 60 days from the date of LOA/PO. NOTE: DP is tentative and MCF/RBL reserves the right to give DP based upon actual requirements while finalization of Case.

Payment Terms

100% payment against receipt, inspection and acceptance of material by the consignee at destination.

Statutory Variation Clause

Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/ contractor.

Option Clause

Purchaser reserves the right to increase the ordered quantities of each description of stores shown in the contract up to 30 percent at the same price, terms and conditions anytime during the currency of the contract i.e., any time within the stipulated or extended delivery period, such that the contractor has reasonable time/notice for executing such increase. The purchaser shall be entitled to exercise plus 30 percent option in one or more than one installment as long as the total variation in quantity does not exceed the limit of 30 percent of ordered quantity. The increase in quantity (upto 30%) with respect to the tender quantity can be done even at the time of ordering and the tenderer shall be bound to accept the quantity so ordered on the basis of his original offer.

Standard Governing Conditions

The tender/contract shall be governed by latest version (along with all correction slips/Corrigendum) of IRS Conditions of Contract, all other terms and conditions incorporated in the Tender Document, terms and conditions incorporated in the documents uploaded with the Tender Document and Bid Document Ver.26 along with CS/Corrigendum to Ver.26. In case of any contradiction in the terms and conditions, the order of precedence shall be the Tender Document, followed by the Special Conditions of Tender if any uploaded with Tender Document, followed by the related Specification/Drawing mentioned in/attached with Tender Document, followed by the Bid Document Ver.26 along with CS/Corrigendum to Ver.26, followed by latest version (along with all correction slips/Corrigendum) of IRS Conditions of Contract. The Bid Document Ver.26 along with CS/Corrigendum to Ver.26 and IRS Conditions of Contract can be accessed by clicking the link VIEW IREPS DOCUMENTS on IREPS website.

Work Description

ELBOW EQUAL 40MM FORGED AND GALVANISED, ELBOW REDUCING 25X15MM & TEE EQUAL 32MM

Tender Information

Tender ID

04261318~MCF

Reference Number

04261318

Tender Type

Limited - Indigenous

Form of Contract

Goods

Location

Uttar Pradesh

Source Website

Subscribe to view

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

3 Sept 2026

Published

3 Sept 2026

Items & Quantities

3 items · 5,605 Numbers total

PL 33546990Goods (Y)

Elbow Reducing (25x15MM) shall be as per specification IS:1239 (Part-2)- 2011 (reaffirmed-2021), Table-9 with Threads to ISO-7/1. Clause no.11.(a) of IS:1239 (part-2)- 2011 shall be applicable. Packing Instruction: SUITABLY PACKED IN JUTE BAGS. [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
SHELL DEPOT, MCFRBL	Uttar Pradesh	1080.00 Numbers
Total		1,080 Numbers

PL 33616966Goods (Y)

Tee Equal 32 MM Bore as per specification IS:1239 (Part-2) : 2011 (Reaffirmed 2021), T ab8, material specification AISI-304 with Threads to ISO: 7/1. Clause no. 11.1(a) of specification IS:123 9 (Part-2): 2011 is applicable. Packing Condition PI-042 Ver1 [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
SHELL DEPOT, MCFRBL	Uttar Pradesh	205.00 Numbers
Total		205 Numbers

PL 62987355Goods (Y)

Elbow Equal 40 mm shall be as per specification IS: 1239 (part-2)- 2011 (reaffirmed-20 21), Table-8 with material specification AISI-304 and Threads to ISO-7/1 . Clause no. 11.1 (a) of IS: 123 9 (part-2)- 2011 shall be applicable. Packing Instruction: SUITABLY PACKED IN JUTE BAGS. [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
SHELL DEPOT, MCFRBL	Uttar Pradesh	4320.00 Numbers
Total		4,320 Numbers

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

HTML

NIT Documents

nit.pdf

NIT

Work Item Documents

5890188.pdf

ATTACHMENT

5890195.pdf

ATTACHMENT

5890193.pdf

ATTACHMENT

5890191.pdf

ATTACHMENT

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].