TIRUPPUR CORPORATION_Z4_GF_Repair and Maintenance work for Ward 36 and 37 MCC Centre at Annaipalayam in ward no 37

Chipping of concrete and roughening the surface in place shown by the departmental officers etc,.

Floor finishing with Granolithic flooring 40mm thick in cement concrete 1:2:4 [one cement, two M-Sand and four aggregates] mix using 10mm to 12mm size metal and top rubbed smooth, including cost of all materials and labour charges for mixing, laying, finishing, watering etc., complete as per standard specification.

Plastering with cement mortar 1:3 mix (one cement three P-sand), 20mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Plastering with cement mortar 1:3 mix (one cement three P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Painting two coats for Black Board surface using best quality Enamel Black Board Paint etc., complete complying with standard specification.

Supply and fixing FRP door shutter with frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of hold fasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., complete complying with standard specification.

Supply and delivery of 63mm PVC Pipe 6KSC ISI specification as directed by departmental officers including all conveyence as per standard specifications.

Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

supply and fixing of 1400mm (56") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp.

Supply and fixing of Incinerator for Ladies Bathroom (For School Works ) etc.,

Supply and fixing of Stainless Steel 304 Insect Killer, Size 40 Liter with following specification ITEM Item - Insect Killer Mounting Type - Wall Use for - Flying insect DESIGN Shape - Rectangular tower No of UV Tubes - 4 Single UV Tube Wattage - 18 Features in Insect Killer - Front Panel Flat, Front Panel Curved, Safety switch for discharge, Removable collection tray, Moisture proof spaces between grids, U.V. Tubes, on/off Rocker switch, fuse, Fly catcher MATERIAL Material of body - Stainless Steel 304 Material of Front Jali - Stainless Steel 304 DIMENSION Chamber Volume (in Litre) - 40 UV Tube length (in Feet) - 1 Effective Area (in Sq Feet) - 340 square foot Minimum thickness of Sheet (in mm) - 0.7 Cord Length (in m) - 2.0 FINISH Finish - Polish POWER Power Consumption (in Watt) - 20 Watt Input power supply - Single Phase 230 V - 50 Hz

Supply and Delivery of PVC Suction Hose/Pipe, Green (1-1/2" x 30 meters, Ultra Light & Flexible with PVC Spiral Ribbed for Extra Strength) with 2 male Connector Nipples + Clamps (4 Nos.)

Supply of sieves of 3'x2' size for screening the waste including all conveyance etc.,

Supply and delivery of Electronic Platform type weighing Scale(GeneralPurpose)of ratedload capacity-500Kg and accuracy as- ±0.25% of RO(Class 3) Electonic Display/ Processing unit/ Generic Rated Load Capacity of weighing scale - 500kg Resolution - 100grm WeighingSystemAccuracyandClass{AsperGoverningIS} [Percentage of Rated Output (RO)) - ±0.25% of RO(Class 3) Maximum Measurement Time in second - 1 sec Electronicdisplaycharactersize-0.5inchorbetterLCD/LED Display OtherfeatureofElectonicDisplay/Processingunit-DualSide Display indicator Load Sensor/ Cell LoadCellAccuracyandClass(Asper theGoverningIS)-± 0.1% of RO (Class 3) SafeOverloadcellCapacity[PercentageofRatedLoad(RL)] 150% of Rated Load Ultimate Overload - 200% of Rated Load Load Cell Linearity - ± 1 % Load Cell Repeatibilty - ± 1 % No of load cell - 1 Power Requirements Power Requirement - Mains operated along with Battery Powersupply/BatteryType-230V±10%,SinglePhaseAC with Rechargeable battery of 6 Ah or better Power feature - Overcharging protection

Supply of Trolley for the lead Purpose in the Centre etc.,

Supply and Fixing of Wooden Table for Office usage in a size of 1.20 x 0.60 x 0.75 m with Plastic Chairs 4 Nos.etc.,

Supply and run of 4 of 4 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains

Provision of Step belt conveyor roller shaft assembly bearings and gear box assemly fixing and aliignment of roller shaft

Supply First Aid Box complete with all First Aid Medicines etc.,