Providing and fitting of mechanical parts of 10000 GPH x 250 meter head HC pump installed at pumping station Jaganoo stage-0 (Old)

Providing and fitting of mechanical parts of 10000 GPH x 250 meter head pump unit installed at pumping station Jaganoo stage-0 (Old) by way of disconnecting electrical connections, pumping unit from base frame, suction and delivery, decoupling of pump from motor, manually shifting pump set from pumping station to road side by head load and then to work shop by mechanical transportation. Dismantling the unit and extraction of internal parts followed by repair by way of providing / fabrication and fitting of new impeller 06nos., neck rings 06 nos., diffusers3nos., shaft protection sleeve 2nos. with check nut 2nos. Providing and fitting of bearings 7308-2nos. at NDE and 308-1no.at DE side. Providing and fitting of bracket-1no of NDE side. Providing and fitting of new coupling pulley set alongwith coupling bolts as per sample. Assembling of pump set, shifting back to site, fitment and coupling thereof with motor after proper leveling and alignment alongwith replacement of damaged nuts, bolts and rubber bushes. Complete job includes cost of material, labour charges, manual carriage charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.