Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.9 L+₹90,003 (2.73%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹36.2 L+₹3.3 L (9.94%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹36.5 L+₹3.6 L (10.8%)Rejected-Finance 05 BABA PALACE MUSRIGHARARI JANDAHA ROAD MUSRIGHARARI SAMASTIPUR BIHAR 848101 | SAMASTIPUR | BIHAR | 848101 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹36.8 L+₹3.8 L (11.6%)Rejected-Finance MD 1 236 SECTOR D1 LDA COLONY KANPUR ROAD LUCKNOW U P PIN 226012 | LUCKNOW | UTTAR PRADESH | 226012 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹48.8 L
EMD Value
₹97,600
Closing Date
23 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 SP Marg, Lucknow Cantt-226002
COMPREHENSIVE SERVICES TO PCDA(CC) OFFICE COMPLEX, PAO(OR) 11 GRRC AND COMPREHENSIVE SERVICES AND MISC WORKS AT PCDA (CC) VIVEK VIHAR COLONY UNDER GE (WEST) LUCKNOW
2022_MES_548035_1
GE/W/LKO/ 53 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Lucknow
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹97,600
Yes
22 Nov 2022
26 Aug 2022
26 Sept 2022
26 Aug 2022
23 Sept 2022
9 Sept 2022
26 Aug 2022 - 2 Sept 2022
Amount
M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. complete all as specified and directed.
M&L for with fly ash bricks, old size, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and directed.
M & L for rendering 15 mm thick on any face of brick walls or concrete surfaces in CM (1:6 ) finished fair and even complete all as specified and directed.
M & L for rendering 15 mm thick on any face of brick walls or concrete surfaces in CM (1:4) finished even and smooth (without using extra lime or cement) and including taking down cement plaster on brick wall including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair complete all as specified and directed.
M & L for rendering 15 mm thick on any face of brick walls or concrete surfaces in CM (1:6) finished even and smooth (without using extra lime or cement) and including taking down cement plaster on brick wall including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed
M & L for rendering 5 mm thick on any face of brick walls or concrete surfaces on ceiling in CM 1:3 finished even and smooth (without using extra lime or cement) and including taking down cement plaster on brick wall including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed
M & L for preparation of New plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.
M & L for preparation of New plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered surface of wall and applying two coats of Oil Bound Distemper complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling and applying one coats of white wash complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S & F joist, channel, angle, or tee sections fixed independently without connecting plates, etc (cut to ordinary lengths i.e. within 20 mm of the length indicated) Fe-410-W(Gde-E-250) quality-B complete all as specified and directed
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L mild steel work as in bands, straps, supports or clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.
M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F for coloured glazed ceramic tiles of size ( 450 x300mm/300x600mm) x 7 to 8 mm thick and joints in neat cement slurry and pointed in white or colours cement to match with existing wall or vertical surface laid over & including 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and including dismantling of lod floor hearth or wall tiling including cement mortar bedding but not backing and removing sreviceable tiles to store yard and rubbish off the premises complete all as specified and directed.
S & F for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including screed bed or bedding layer 15 mm thick in cement mortar 1:4 and including dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed
S & F for light shade vetrified ceramic tiles 7 to 9 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including screed bed or bedding layer 15 mm thick in cement mortar 1:4 and including dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed
S&F vitrified tiles, coloured, superior quality 8 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.
S&F vitrified tiles, coloured, superior quality 8 to 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.
M&L 18-20 mm thick granite stone slab, machine cut and polished as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges including dismantling of existing stone slabs complete all as specified and directed.
M & L for coloured cement concrete tiles 30 cm x 30 cm x 20 to 25 mm thick set with grey cement and pigments jointed and pointed in neat coloured cement slurry in floors over and incl 20 mm thick cement screed bed in cement mortar 1:6 including dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed as complete all as specifed and directed
S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old asbestos cement (corrugated or semi corrugated etc) sheets in roof coverings complete all as specified and directed
S&F in repairs 'E' board everest 600 x 600 x 4mm thick white, prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to be structural soffits by approved hangers at 1200mm C/C. Hanger of GI wire 4 mm dia to be fixed by approved recoil plug, screw etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall. flash fitting of 1200 mm long cross tec (with double sticking) to be interlocked bet wean main runner at 0600 mm centre from 1200x600 mm to modules cross tec longer than 600 mm to be supported independency 600x600 mm do duels to be formed by filling 600 mm long cross tec centrally between the 1200 mm cross tec. Tec perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour all as per manufacture instruction complete all as specified and as complete as directed.
M&L in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with P or S trap and making good floor complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.
S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and directed.
S&F in repairs PVC low level white flushing cistern valveless symphonic action type 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable complete all as specified.
S & F in repair vitreous china bowl urinal flat back of size 465 x 355 x 265 mm white (min) with grating and union for discharging pipe excluding cistern flush pipe and waste pipe complete all as specified and directed
S&F in repair 15 mm bore Pillar taps half turn, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed
Supply & Fixing in repair copper alloy long body bib taps half turn cast copper alloy with crutch or butterfly handle, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifed and directed.
S & F in repair coloured vitreous china wash hand basin white flat back size 550 x 400 mm including two nos bracket CP waste coupling and 32 mm dia wste pipe complete all as specified and directed
S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.
S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as directed
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
S & F in repair PVC water tank 1000 ltr capacity rotational moulded (cylindrical vertical with close top) hoisted and fixed in position complete all as specified and directed
S & F in repair PVC water tank 2000 ltr capacity rotational moulded (cylindrical vertical with close top) hoisted and fixed in position complete all as specified and directed
S & F in repair 15 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) all as specified and directed
S & F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium weight 15mm -142 gms) complete all as specifed and directed.
S&F in repair angle valves 15mm bore, half/quarter turn, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair stop valves concealed type 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair brass chromium plated overhead shower rose with arms, 100mm dia, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.
S&F in repair 5.5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified & as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.
S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm ,5mm thick plain glass and required accessories.area nexc 3 sqm complete all as specified and directed. (Note: The unit rate quoted by contractor includes cost of glass, wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.)
S&F 5.5mm Sheet glass,ordinary quality fixed to window in square n exc 0.5 sq. m in each pane, complete, all as specified.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm each, complete, all as specified & directed.
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief
S & F in repair aluminium anodised chequered grill of diamond shape with 6 mm dia wires and mesh size 100 x 100 mm fixed in aluminium Y channel and aluminium flat 25 mm wide fixied with aluminium screws complete all as specified and directed
S & F in repair Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
M & L applying plastic emulsion texture paint on internal wall surface over 1 mm thick wall care putty on 2 mm thick plaster of Paris including preparing surface by using sand paper, punning etc for smooth surface. Note : Texture pattern/ Shade shall be approved by Engineer-in-charge.
Providing and laying of 75 mm thick hard core broken stone/ boulders to gauge n exc 63 mm as specified and directed
M&L for 75 mm thick Cement concrete PCC 1:3:6 type C-2(using 40 mm graded granite stone aggregate) in sub base of flooring as specified and directed
Providing and laying of Machine pressed roubber moulded precast conctete interlocking paver block any shape and size of 60-62mm thickness, M-35 Grade laid over and incl 25 mm thick sand cushion and joint filled with fine sand including leveling tamping & sweeping etc including dismantling stone slab and tiles of any description or thickness laid bedded and pointed in any mortar complete all as specified & directed.
S & F in repair 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed
S & F in repair 5 mm thick solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed
S & F in repair 5.5 mm thick sheet glass ordinary quality and glazing wth oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness size quality of description) from metal frame including punching or drilling out old glazing pins/ spring clips complete all as specifed and directed
M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.
Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss all as specified.
S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.complete all as specified
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 100mm size stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.
S&F in repair 18/19mm thick ply wood, grade BWR type BB quality, fixed with screw/nails to timber frame work complete all as specified and directed.
M&L 0.90mm thick Decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.
S&F ball catches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.
S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin/sink etc. with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S&F in repair 25mm dia stainless steel curtain rod, superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.
S&F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed..
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed.
M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.
M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.
M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.
M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.
M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Complete removal of existing treatment of wall and M&L for two coats of oil bound distemper on previously treated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.
S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified
S&F in repair 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
Demolition of sunken slab floor of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per mnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with sealing compounds complete.
M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:6with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and directed.
S&F for mild steel deformed bars or TMT bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F for mild steel deformed bars or TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Cleaning of soak well upto 2.4 m dia, 6 m depth (liquid depth) using mechanical pumps diesel driven with fuel, operator and necessary excavation on half buried night soil and disposed off soak well water etc in pits including necessary excavation and earth work for pits for burrying the night soil etc in soft/loose soil complete all as specified and directed.
Cleaning/disludging of existing septic tank of any capacity/sump well of any dia and depth incl taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc means of sewage sucking machine or by way of any other suitable means and removing the sludge outside MD land by any means complete all as specified and directed. Note: The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised take up this aspect in mind while quotating the rates. After taking measurements, the solid contents shall be disposed off outside the MD land/area
M&L for cleaning of sewer line 100 mm bore pipe, of any depth, of any location, manhole of any depth, section, size between the sewer lines sewer line to septic tank/soak well/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional of the pipe lines, complete all as specified and directed.
All as per item No.113 above but 150 mm internal dia of pipe complete all as specified and directed.
M&L for cleaning of manholes any depth of any loc, section after cleaning trap, wc, soil/vent pipe gully trap upto and incl first manhole manually or mechanically or by way of any other suitable means or by rodding between trap and manholes incl disludging foreign material sand, ashes, fibre, silt, grease night soil etc and removing the taken out sludge/material outside MD land by any means/sources keeping the sewer line /manhole functional complete all as specified and directed. Note:- For item No. 111 to 115 : (i) Necssary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (ii) The contractor shall be enterily responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution. (iii) The work shall be executed with all safety measures under the supervision of highly skilled workman/supervisor without entering into the septic tank, manhole, sludge chamber etc
Taking up broken existing sewer line of any depth and replacing sewer pipe with SGSW pipe 150mm bore including jointing of pipe in CM 1:1, haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded brick agg incl necessary excavation and earth work, disposal of material up to a distance of 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed incldg demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level)all as specified and directed
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; incldg dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .