Rewiring of Golden JUbilee Hostel in NCL Colony

Amount

Dismantling the existing light,fan plug point & ckt mains with VIR/PVC wire in casing capping, PVC pipe or PVC conduit complete with fittings such as batten holder, ceiling rose, switches, regulators & refilling the holes with cement morter & finishing in an approved manner. Extreme care should be taken while removing wiring.Rate is inclusive of returning the removed material to NCL stores & transport required for the same.

Dismantling the existing mains/Sub mains wiring in PVC conduitpipe/Casing capping from the wall & making the surface clean as required.

Wiring for Light/Fan/Bell/Exhaust fan point with 2 x 1.5 Sq.mm PVC insulated FRLS wires copper conductor Finolex / Polycab /RPG make in PVC casing capping Modi make & Modular switch 6A Legrand Myrius /MK Blenze Plus make with PVC surface box, modular plate & holder/ceiling rose, complete with connection. Also to run an earth wire of 1.5 sqmm all along the length of the point. (For General Lighting in Rooms & other places)

Wiring for two way light point with PVC insul.,copper conductor FRLS wires 1.5 sqmm, Finolex/ Polycab /RPG make in PVC Casing capping Modi make & angle holder/ batten holder/ ceiling rose & Modular 2 way 6A switches Legrand Myrius /MK make fixed on PVC surface box, modular plate complete. And to run PVC insu cu earth wire of 1.5sqmm all along the length of point as required by site Engineer.

Wiring for Independent plug point with 2 x 1.5 Sq.mm PVC insulated FRLS wires copper conductor Finolex / Polycab /RPG make in PVC casing capping Modi make & Modular switch switch 6A & socket 6A, 5 pin Legrand Myrius /MK Blenze Plus make with PVC surface box & modular plate complete with connection.Also to run an earth wire of 1.5sqmm all along the length of the point.

Supplying,fixing & connecting switch board with 6Amp universal 5 pin modular socket & 6A SP switch Legrand Myrius /MK Blenze Plus make on wall or lighting control board.Rate is inclusive of PVC surface box & modular front plate.

Supplying, fixing & connecting on wall switch board with universal 6Amp, 2 in 1 modular socket(2module)----2No, & S.P. modular switch 6A---2no. Legrand Myrius/MK Blenze Plus make. Rate is inclusive of PVC surface box & modular front plate.

Supplying, fixing & connecting on wall switch board with universal 16/6Amp, 2 in 1 modular socket(3module)----1No, & S.P. modular switch 16A---1no. Legrand Myrius/MK Blenze Plus make. Rate is inclusive of PVC surface box & modular front plate.

Wiring for light/Bell/Fan point with PVC insul.,copper conductor FRLS wires 2x1.5 sqmm, Finolex/ Polycab /RPG make in PVC casing capping Modi make & angle holder/ batten holder/ceiling rose & piano type Anchor make Penta Model switch 6A fixed on PVC deep board. Switch board should be of PVC surface box with front plate of PVC Presto Teak make. And to run PVC insu cu earth wire of 1sqmm all along the length of point as required by site Engineer. Chromium plated cup washers should be used for fixing screws.( For SA type Qtrs)

Wiring for independent plug point with 2 x 1.5 Sq.mm PVC insulated FRLS wires copper conductor Finolex / Polycab /RPG make in PVC casing capping Modi make & piano type Anchor make Penta Model switch 6A & 2 in 1 Socket 6A fixed on PVC deep board. Switch board should be of PVC surface box with front plate of PVC Presto Teak make. And to run PVC insu cu earth wire of 1sqmm all along the length of point as required by site Engineer. Chromium plated cup washers should be used for fixing screws.(For SA type Qtrs).

Supplying, fixing & connecting on light control board 5 Amp, 2 in 1socket & S.P.switch 5A piano type, Anchor Penta or equivalent of Vinay make.( For SA type Qtrs)

Supplying, fixing & connecting piano type Anchor/Vinay make switch 15A & universal socket 15A fixed on PVC board Presto Teak make. Switch board should be of PVC board Presto Teak make white colour. ( For SA type Qtrs)

Wiring for circuit wiring with 2x2.5sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in PVC casing capping Modi make, including connections at both ends & To run PVC insu. cu earth wire of 1.5sqmm all along the length.Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 4x2.5sqmm PVC insul. copper cond. FRLS 1.1KV grade wires, Finolex/Polycab/ RPG make, in PVC casing capping Modi make, including connections at both ends & To run PVC insu. cu earth wire of 2x1.5sqmm all along the length. Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 2x4sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in PVC casing capping Modi make, including connections at both ends & To run PVC insu. cu earth wire of 2.5sqmm all along the length.Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 4x4sqmm PVC insul. copper cond. FRLS 1.1KV grade wires, Finolex/ Polycab/ RPG make, in PVC casing capping Modi make, including connections at both ends & To run PVC insu. cu earth wire of 2x2.5sqmm all along the length.

Supplying & Fixing PVC conduit pipe heavy duty 1'' dia, Diamond/Asian make on wall with MS saddles & spacers.

Wiring for circuit wiring with 2x2.5sqmm + 1 x 1.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in existing PVC conduit pipe, including connections at both ends .Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 4x2.5sqmm + 2 x 1.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in existing PVC conduit pipe, including connections at both ends. Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 6x2.5sqmm + 3 x 1.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in existing PVC conduit pipe, including connections at both ends. Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 8x2.5sqmm + 4 x 1.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in existing PVC conduit pipe, including connections at both ends. Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 2x4sqmm + 1 x 2.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in Existing PVC Conduit including connections at both ends. Rate is inclusive of al the material & labour required for the job.

Wiring for circuit wiring with 4x4sqmm +2 x 2.5 sqmm PVC insul. copper cond. FRLS 1.1Kv grade wires, Finolex/ Polycab/ RPG make, in Existing PVC Conduit pipe, including connections at both ends. Rate is inclusive of al the material & labour required for the job.

Supplying, fixing & connecting Ding dong bell Anchor/Vinay make on teak wood/ sunmica top board.

Supplying & fixing on T.W. Board Main Distribution board Legrand Ekinox make 16 way cat no.507613 with 1 no. of Legrand make DP RCBO 40 A, 30mA sensitivity cat no.411327 as I/c & 12 nos of 6-25A SPMCBs 10KA breaking capacity as O/G. Rate is inclusive of enclosure, MCBs & connections. Separate Connector should be provided for neutral & Earthing.

Supplying & fixing Electronic fan regulator modular type Legrand Mosiac /MK make on PVC surface box & modular front plate. This fan regulator is to be accomodated on the lighting control board so the size of the light control board may be taken accordingly. Rate is inclusive of all the material required for the item.

Supplying, fixing & connecting on wall with screws & fixing arrangement prewired LED Batten light fitting 20-22 watts 4 feet long of Luker cat no.L5TM20 / Havells make , E Lite LED Curve, 6000K or Equivalent of Syska SSK T5 20- 22 make complete with accessories.

Supplying, installing, testing & commisioning on streetlight pole LED type street light fitting 50W Luker Make:cat no. IP66, 6000K, LSTE50WH/Eq of Havells/ PHILIPS Make complete with Driver etc complete. Rate is inclusive of testing the fitting by actual giving the supply. The LED Light fiting should have minumum 3 years replacement warranty

Supplying, installing Testing & commissioning Exhaust fan Crompton make Metal body 300mm.Exauhst fans should be fixed on plywood with Anchor fastners & MS Nut bolts.

Supplying, installing testing, commisioning & connecting on existing streetlight pole LED type Flood light fitting Havells make cat No Jeta Pro Plus 150W LED Flood Light or equivalent of Luker Flood Light fitting 150WIP65, LFLSL150WH/ or eq of Philips make fitting complete with Driver etc complete.Rate is inclusive of testing the fitting by actual giving the supply. The LED flood fiting should have minumum 3 years replacement warranty

Supplying & fixing in metal enclosure DPMCB 32 Amp, Legrand Lexic/ Siemens/ Hager make on wall complete with connections & testing.

Supplying & fixing in metal enclosure Four pole MCB 32 Amp, Legrand Lexic/ Siemens/ Hager make on wall complete with connections & testing.

Ramesh Electrical and Mechanical Works

KUMAR ELECTRICAL AND ENGINEERS

suvarna electricals pvt.ltd.