R/R damages on Sarain to Jhokar road km. 0/0 to 14/200

Providing Laying,spreading and compacting stone aggregate of specific sizes to water bound macadam specifcation including spreading in uniform thickness, hand packing rolling with three wheeled 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushable, screening to fill up the interstices of coarse aggregate, watering and compacting to the required density as per techical specification clause 405 . W B M Grade- III 53 mm to 22.5 mm size ( By manual means)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing and applying primer coat with Bitumen SS-I grade on the prepared surface of granular base including cleaning of road surface and spraying primer @ 0.90-1.2 kg / sqm using mechanical means as per technical specification clause 502. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.

Providing, laying and rolling of close-graded Mix seal surfacing material of 25mm thickness composed of 11.2 mm to 0.90 mm (Type-A) @ 0.338 kg/per ten square meter aggregates using penetration grade bitumen @ ie binder content @ 27.50 kg/10 sqm or 5.11% by weight and minimum density of MSS should be 2.10 gm/cc to required line,grade and level to serve as wearing course on a previously prepared base,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and gradient as level to as per Technical specification clause 509. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government exclusive GST.