NIT No. 5(2025-26)M-VI ITEM No. 18

Supply of sewage p/set modle SHM-100/26 or equivalent ,15 Meter Head, Discharge: 390 m3/hr, suction delivery 125 x100 mm dia with C.I.Impeller & EN Shaft & gland packed. Make: - M&P / Kirlosker / Becon/ Approved

Making of cement concrete foundation suitable for the P/set with all material like cement, concrete, sand, etc. i/c supply and grouting of foundation bolts etc. as required.

Making and supply of MS channel base frame suitable for sewage pump set and suitable for Motor. Made out of suitable size channel.

Fixing of fabricated MS foundation base frame on the RCC foundation plastering/ filling the gap of RCC foundation and MS foundation after fixing of base frame with the help of manual labour.

S/O of 125 mm Dia M.S. pipe Make: Jindal /Tata / Approved make by DJB

S/O of 100 mm Dia M.S. pipe Make: Jindal /Tata / Approved make by DJB

Supply of sluice valve, non-rising with SS spindle flanged ends of size 100mm PN 1.0 MAKE: Kirloskar/ IVC /DJB Approved

Supply of C.I. NRV without bye pass swing type flanged ends of size 125 mm PN 1.0 MAKE: Kirloskar/ IVC / DJB Approved

S/o Nut bolts with washers of good quality.

Supply of 50% neoprene rubber packing of suitable size as per site requirement.Make: Jyoti/ Worth SOR 22.6.1

Supply of coupling set suitable for above pump and motor including making bore as per shaft size of pump and motor and making keyway

Supply of Changeover switches, 4 poles, off load, in sheet-enclosure, 415V AC, 50 Hz with side handle operation, of capacity 250 Amp. Make: C&S/L&T/HAVELLS.

Molded Case Circuit breaker of 250 Amp rating. Breaking Capacity is 50 KA, Ics 100% Icu, Suitable for isolation, conforms to IS/IEC 60947-2 & IEC 60947-2, Provision of thermal memory, Front LED indicator, Manual, rotary or motorized version at 415V Three pole with adjustable microprocessor release/Adjustable over load and short circuit. Make :- BCH/ L&T/ Havells / C&S

S/O 36/ 40 Watt LED batten with integrated LED tube complete in all respect suitable for surface and wall mounting. Make : Havells/Bajaj/ Crompton.

S/o of 1200 mm ceiling fan. Havells, CG, Orient, Usha.

S/O 70 +- 5 watt LED street light made up of pressure die cast aluminium housing with high power led as lighting source with IP65/ IP66 protection. Make : Havells/Bajaj/ Crompton. DJB Sor 19.10.6

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.DSR 12.34

S/O PVC insulated 3 core Unsheathed industrial flexible cable confirming to IS 694 : 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volt 16 sq mm Make: - Gloster, Grandlay, Havells , Poly Cab, National Approved by DJB

Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum Conductor, galvanized steel flat strip / round wire armored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 Size 3.5 X 25 Sq mm

Supply of portable powder and multipurpose fire extinguisher Multipurpose,Low Pressure Extinguisher (Service Pressure ≤19 bar) Powder Based (as per IS 4308 ),Stainless steel cylinders ,Type stored Pressure,Extinguishing Media,Powder Based (as per IS 4308 ) and Powder type with carrying handle ,valve and all other required items Size – 4.5 Kg

Installation of motor Pump/set, fixing of coupling and coupling guard and other E&M equipment along with all piping work & making, providing and fixing of specials like Bends, Tee, reducer, flanges etc. as required at site & fixing of valve, and executing all allied E&M and civil work, laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement.

Fixing of all electric items such as MCCB, Change over, Fan, LED batten, LED Street lightwith GI bend pipe and laying of cable from source to supply.

Painting of complete all E&M equipments like valve, motor, NRV, flanges etc. after scrubbing the rust from emery paper with double coat of primer

Testing & commissioning of motor P/set & electrical panel i/c above all E&M equipment first at on No-load and then on full-load condition.

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

Shiva Buildtech (BID ID -1595385)