Construction work for flooring, windows, and doors in the classrooms of Vrindavan Lal Jain Ramsahay Rawat Educational College, located near Gauna village (near Narahat) in Madawara Development Block

14.2 Fixing chowkhats in existing opening including embedding chowkhatsin floors or walls cutting masonry for holdfasts, embedding hold fasts incement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhatsand making good the damages to walls and floors as requiredcomplete,including disposal of rubbish to the dumping ground, all complete as perdirection of Engineer-in-Charge.14.2.1 Door chowkhats each 1782.55

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters. 3086.10

Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thick clearfloat glass both side, having 12 mm air gap, including providing EPDMgasket, perforated aluminium spacers, desiccants, sealant (Both primaryand secondary sealant) etc. as per specifications, drawings and directionof Engineer-in-charge complete. 4997.70

52 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer'sspecifications. This includes cost of cement slurry, but excluding thecost of nosing of steps etc. complete

12 mm cement plaster of mix 13.4.1 1:4 (1 cement: 4 coarse sand) sqm 357.35

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Sign Board

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

LED Batten Light 18-22 watt supplying installaltion testing & commissioning of led surface mounted batten light of following body material and consrution as per IS 10322 with driver as per the requiredment with driver efficiency 85% operating voltage AC 140-270 volt