Creation of 200 KVA sub-station, LT extension 3 phase 4 wire near Hansa Bhugtrain stage-1st and providing, fitting, installation, testing and commissioning of 8000 GPH x 275 meter head HC pump set with suitable prime mover and allied accessories at W

Amount

Supply, transportation, carriage, realignment, erection, testing and commissioning of 200 KVA Electric sub-station and LT extension 3 phase 4 wire at WSS Seer Manjala (near Hansa Bhugtrain stage-1st). ST poles 9/8 mtrs long, 200 KVA sub station (level-2, 200 KVA transformer, GO set, HG set, X-arm long channel X-angle, cable 185 sq.mm pin insulator, LT distribution box with MCCB for 200 KVA xmer, LA set, Disc insulator with fitting, Guy road complete with TB, Red Oxide, Al. paint, ACSR weasel conductor, danger plate, Nuts and bolts,, earthing materil / earthing of poles, cement bottoming of the poles, anti climbing barbed wire, trivector meter 3 phase 4 wire, CGI shed 12'x14' complete, ST poles 8 mtr long, ASCR sq. Conductor, Mulkhi clamps, shackle insulator, guy rod complete with accessoires, manila rope . Complete job. (Detail of items as per enclosed annexure in SBD).

Description of Work / Item(s)

Amount

Providing, fitting, installation, testing and commissioning of 8000 GPH x 275 meter head HC pump set with suitable prime mover alongwith allied accessories at pumping station Seer Manjala by way of shifting the same upto the road side nearest to pumping station Seer Manjala, unloading the same from vehicle manually using other tools and tackles and then dragging up to pumping station on channels / pipes using pick axes, crowbars, ropes, etc. and stacking inside pump-room. The job further includes earthwork in bulk excavation for making foundation block upto the depth of about 1.5 meters so as to form a size of 6’x3’x4’.Dumping of excavated material outside the pump room at a distance of about 50 meters. Providing and Fabrication of 06 nos. foundation bolts of suitable thickness one meter long by threading them at one end and making of anchor to other end. Laying of bed concrete of 1:4:8 mix using 20 percent aggregate, laying of RCC of 1:1.5:3 mix including supply/fixing of farm work / shuttering, aggregates, sand and cement, reinforcement steel from 10mm tar steel with mesh for all RCC work, angle iron for supporting/alignment of base-frame including cutting, bending, placing in position and binding, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally, hire charges of vibrator, mixer, welding set, shuttering, tools and tackles etc. and curing complete. Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles, Leveling of pump motor set on the base frame by using laminated sheet, strips and coupling thereof. Providing / laying of 80mm/65mm θ GI suction and 100mm/80mm θ delivery pipe lines to the pump set by providing/cutting of required θ GI pipes approximately as per site requirement in the convenient lengths and also interconnecting the suction and delivery pipe line with the GSR and rising main respectively with the help of oxygen acetylene gas / electrode welding. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction / delivery pipes in continuous fillet weld of 6mm in three layers of advani make super bond welding electrodes of 4mm and 3.14 mm θ. Providing, fabrication and fitting of 100mm/80mm/65mm θ MS bends, 100mm/80mm/65mm dia MS flanges, expanders, reducers, gaskets, nuts, bolts etc. as per site requirement, providing/fitting of 100mm/80mm θ cast steel sluice valve and cast steel NRV-01no. each as matched with provided pump delivery outlet to the delivery pipe line and 80 mm dia heavy duty CI sluice valve as per site requirement to the suction pipe line confirming to ISI make including nuts, bolts, gasket flanges etc. etc. Job further includes providing, fabrication and fitting of 100mm dia GI pipe delivery manifold outside the pump room and connecting with delivery pipe line using oxygen acetylene gas system including cost of gas, blind flanges including nuts, bolts and welding rods, cutting work at site, carriage of gas cutting appliances including skilled/semi- skilled labour charges. Job also includes providing and fitting of 70mm2 or other equivalent copper cable from panel upto motor approximately 40 meters or as per site requirement in length with proper thimbling and insulation material. Job also involves proper earthing of the motor of the pump set. Complete job includes cost of material, transportation / head load charges loading /unloading, hire charges of other tools and tackles, testing and labour charges. Complete job.

GANPATI ELECTRICAL AND MECHANICAL WORKS

Rishabh Electricals and Mechanical Works

N B Engineering and Electric Works

GANPATI ELECTRICAL AND MECHANICAL WORKS

Rishabh Electricals and Mechanical Works

N B Engineering and Electric Works