RESURFACING TO CERTAIN ROADS AND ROAD FURNITURE AT AF STN RAJOKRI UNDER GE AF GURGAON

Amount

M&L for repairs to pot holes any depth, not exc 1.0 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in road path etc cutting around edges to at least 25mm deep and making good by applying tack coat with paving bitumen of VG 10 @ 5 Kg/10 Sqm and putting in premix bituminous of VG 30 as binder content by weight of total mix well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09cum of stone chipping 6.3 mm size and again well rammed (including premixed macadam, binder and chippings) laid and rolled with 8 to 12 tonne roller and compacted and consolidated thickness complete all as specified and directed.

Scarifing or picking gravalled, macadam or bituminous macadam surfaces in area exc 50mm deep but n exc 100mm deep complete all as specified and directed.

M&L for 7.5cm thick (compacted thickness) WBM Granite trap or basalt with coarse aggregates of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size) spread rolled and consolidated with 8 to 12 tonne power roller to gradient and camber required etc complete all as specified and directed.

M&L for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly priming/tack coat with paving bitumen of VG-10 at 10 Kg per 10 Sqm, complete all as specified and directed.

M&L preparing black top on old surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly priming tack coat with bitumen primer using paving bitumen of VG-10 @ 5 Kg per 10 Sqm complete all as specified and directed

M&L premix bituminous macadam using paving bitumen grade VG-30 with bitumen content @ 4% by weight of total mix using hot mix plant and mechanical paver laid/rolled and compacted to required gradient and camber with 8-12 ton power road roller and rolled to a uniform smooth surface (consolidated thickness 75mm or less) complete all as specified and directed.

M&L bituminous premixed semi dense bituminous concrete 30mm consolidated thickness using paving bitumen (VG-30) 5.5% binder content and filler by weight of total mix as per design mix, spread by means of self propelled mechanically spreader/paver, rolled and compacted to required camber and gradient complete , by using mechanically power road roller 8 to 12 tonne capacity all as specified and directed. NOTE: (A) Mix design to be carried out as per job mix formula for adjustment of bitumen and filler content.

S&F thermoplastic paint on black top surface or existing painted surfaces applied hot mixing plant of heating of thermo plastic material to a standard temparature with gas and laying standard thickness of approx 2 mm by using thermo plastic material @ 6.5 Kg/Sqm and glass beads @ 250 Gms/Sqm complete complete all as specified and directed.

S&F in repair road safety convex mirror of 75 cm to 90 cm dia made of polycarbonate including fixing arrangments etc complete all as specified and directed.

S & F in repair speed bump made from heavy duty ABS with high resistance wear & tear property. UV stablized black & yellow combination. High reflective reflectors having L=70mm W=23mm available on both sides in red or yellow colour of size H=50mm, W=380mm, L=500mm fixed on the road by using epoxy resin based adhesive and spikes as per manufacturer instructions complete all as specified and directed.

M&L for preparation of new concrete surface and applying two coat of plastic emulsion paint exc 10 cm girth or width not other wise described over a coat of primer etc complete all as specified and directed.

M&L factory made precast cememt concrete kerb stone in type B1 (1:2:4) using 20 mm graded stone aggregate all as per manufactured in joint less moulds on vibrated compaction table and finished smooth as per required shape , size and pattern and setting in position in CM 1:4 jointed and pointed with CM 1:2 including making drainage opening wherever required size of kerb stone 400mm x 150mm x 300mm and painted in colur pattern of yellow and black all as directed by EIC Make :-A-one/ Mehtab tiles/Hindustan/Nitco

Demolition of Precast cement concrete kerb stone in any floors and paving not exc 15 cm thick above or below ground level.

Net Contract Sum will be after deducting Sch of Credit of Rs 8,475.00

Som Builders

M/s Birja Nand