Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹18.1 L+₹2.0 L (12.8%)Rejected-Finance SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance L2 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN B/R REPAIR TO MD AND OTM ACCN AT J-1 AND J-2 LOC UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT
2023_MES_607410_1
GE/JULL/ET-35/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹40,000
Yes
11 Sept 2023
30 Jun 2023
4 Aug 2023
30 Jun 2023
27 Jul 2023
15 Jul 2023
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified
Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified
Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM (1:4) complete all as specified
Material and labour for Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.
Material and labour for Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed.
Material and labour for non skid ceramic tiles/ non skid coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.
Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..
Material and labour for glazed ceramic coloured tiles of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.
Material and labour for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.
Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate stone) as in subbase, complete all as specified and directed.
Material and labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate stone) as in sub base or foundations, filling and mass concrete, complete all as specified and directed.
Material and labour for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 grade, over 25mm thick sand cushioning complete all as specified and as directed.
Material and labour for Cement concrete tiles with grey cement and pifment of size 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.
Material and labour for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in floor patch complete all as specified and directed
Material and labour 75 mm thick PCC 1:3:6 type C-2 as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete in ground floor and paving/as in sunken portion ( below or above ground level) all as specified
Material and labour for cement concrete (1:5:10) type E-2, (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed
Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under :- (a) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg. (b) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided. (c) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement. (d) GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction. (e) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. (f) Two component Acrylic modified Cementitious coating:- (i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-
(ii) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (iii) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO. (iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (v) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (viii) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. (ix) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.
(x) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (xi) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (xii) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (xiii) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (g) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (h) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation cup boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
Supply and fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS: 14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-Charge
Supply and fixing PVC Wall lining 5mm thick consisting Hollow section plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.
Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets as in roof coverings complete all as specified and directed
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed
Supply and fixing for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quality 'A' , complete all as specified and directed
Supply and fixing 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap, fixed with coach screw and washer in roof, wall etc all as specified and as directed
Taking down cement plaster on brick walls etc including Racking out joints hacking to key scrubbing down with water etc up to 4th story complete all as specified and directed by Engineer-in-Charge
Material and labour rendering on concrete/brick surfaces 15mm thick in CM 1:4(externally) finished even and fair without using extra cement complete all as specified .
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed
Material and labour rendering 15 mm thick in CM 1:6 on concrete surfaces finished surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for Preparation of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of priming surface complete all as specified
Material and labour rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and directed.
Material and labour for preparation of newly plastered surface of ceiling including cornices pilasters etc. and applying three coat of white wash on ceiling complete all as specified and as directed
Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, complete all as specified
Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified
Taking down shutters of n.exc 1.00 sqm each, complete all as specified and directed.
Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and directed.
Supply and fixing 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified
Supply and fixing 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified
Supply and fixing 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position complete all as specified and directed
Supply and fixing 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels for cupboard/shelves, commercial type on both sides complete all as specified and directed.
Supply and fixing in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 25mm wide, 6mm thick 2nd class HW lipping on edges complete all as specified and directed.
Supply and fixing 40 mm dia powder coated cup board knobs fixed with nut, screws and washer of mild steel bright finish complete all as specified.
Supply and fixing 20mm stainless steel pipe for cupboard with fixing brackets, stops, rollers etc. complete all as specified and as directed
Supply and fixing Mild steel rollers and plate suitable for sliding drawers, complete all as specified and directed.
Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanised., width of flaps when open in 30mm complete all as specified and as directed
Supply and fixing stainless steel magnetic catcher of any colour of size 48 MM X 14 MM X 14 MM, berrium ferrite magnet of size 25mm x 10 mm x6 mm, abs vergin plastic, fitted with 2 Nos screw of 13mmx4mm csk head with zinc plated complete all as specified and directed
Supply and fixing 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.24 (a) of SSR Part-I ,complete all as specified and as directed.
Supply and fixing for 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.
Supply and fixing Steel window (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handle Supply and fixing flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No CEJZ/WD-1655/22 and CEJZ/TD-1019/08 Sheet No. 1/3 to 3/3. Note:-The above rate for glazed and gauged shutter window and measured one time clear opening for payment of window.
Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified
Supply and fixing 100mm size MS butt hinges medium weight cold rolled (zinc chromate)., complete all as specified and directed
Supply and fixing 100 mm butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed
Supply and fixing aluminium anodised barrel tower bolts of extruded section 100mm long, complete all as specified and directed.
Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and directed.
Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed.
Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised 100 mm in size, complete all as specified and directed.
Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised 150 mm in size, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed
Supply and fixing Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified
Supply and fixing for 100 mm size Hasp and staple, aluminium anodised, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified
Material and labour in repair 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall complete all as specified
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.
Supply and fixing sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Supply and fixing sheet glass ordinary quality 4.0 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Supply and fixing Figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.
Supply and fixing toughened glass 12.0 mm thickness as in hinged doors, partitions automatic doors and similar work including fittings, cutting to shape, drilling holes required
Supply and fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.
All as per item No. 76.00 here-in-before but in repairs
Supply and fixing for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
Material and labour Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
Material and labour for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.
Material and labour for Mortice lock, vertical type, size 100mm 4 lever Brass body, complete all as specified and directed.
Supply and fixing 3mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and directed.
Supply and fixing in repair 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and directed.
Supply and fixing in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.
Supply and fixing in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specified and directed
Supply and fixing rotational moulded polye-thylene water storage tanks, 1000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified & directed.
Supply and fixing 25mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.
Supply and fixing galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed
Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.
Supply and fixing galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed
Supply and fixing in repair bib tap long nose ,fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore of pipe complete all as specified and directed.
Supply and fixing in repair pillar tap, fancy type, cast copper alloy, chromium plated with capston head, screwed down, high pressure with or w/o lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore, complete all as specified and directed
Supply and fixing in repair 15 mm bore Angle Valve fancy type chromium plated with long shank and cup complete all as specified and directed.
Supply and fixing in repair 15 mm bore chromium plated stop valve,concealed type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
Supply and fixing in repair Over Head Shower 105mm dia, Single Flow suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair tubular towel rail , chromium plated brass 20mm dia ‘D’ type 60 cm long between flanges complete all as specified and directed.
Supply and fixing in repair health faucet with 1 mtr long easy flex tube in chrome finish & wall hook suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed
Supply and fixing in repair CP jet spray with holder for EWC,1.5m long, complete all as specified and directed.
Supply and fixing in repair PVC connection, heavy duty15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
Supply and fixing in repair new flexible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed
Supply and fixing in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.
Supply and fixing in repair, Sheet Glass Corner Shelves Assembly, consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.
Supply and fixing in repair brass chromium plated soap dish, complete all as specified and directed.
Supply and fixing in repair Vitreous China White Wash Down Water Closet Pan EWC with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /disturbed surfaces including dismantling the existing unserviceable Water Closet complete all as specified and as directed
Supply and fixing in repair Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan i complete all as specified and as directed.
Supply and fixing in repair, White Plastic Water Closet Seat and Cover for Water Closet Pan EWC, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.
Supply and fixing in repair PVC flushing cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve,flush pipe, Float and handle, complete all as specified and as directed.
Supply and fixing Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or) with pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin complete all as specified and as directed.
Supply and fixing chromium plated grating 100 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.
Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as specified and directed
Supply and fixing 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.
Supply and fixing 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed
Supply and fixing 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.
Supply and fixing 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.
Supply and fixing 110 mm dia PVC (SWR ) branches piece, double (double Y) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed
Supply and fixing 75 mm dia PVC (SWR ) branches piece, double (double Y) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed
Supply and fixing 110 mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR ) vent cowl complete all as specified and as directed.
Material and labour 125/110mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.
Supply and fixing in repair vitreous china Basin with full pedestal with fixing Accessories , white, flat back size 570 x 470x190 mm , MAKE : JAGUAR or equivalent model of HINDWARE/MARK (as approved ) complete as all specified and as directed.
Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Over Head Shower 140mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system of MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Body Bib Cock (Foam Flow) with Flange of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange of MAKE : JAGUAR or equivalent model of HINDWARE/MARK suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair angular stop Cock with Wall Flange of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair hand shower (health faucet) with 8mm dia, 1.2 mtr long flexible tube & wall hook of MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved), suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.
Supply and fixing in repair Hand Shower 105mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Centre Hole Basin Mixer with popup waste with 450mm long Braided Hoses of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair, Towel Rack with Lower Hanger of MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.
Supply and fixing Corner glass shelf (with bracket) of MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved), complete all as specified and as directed.
Supply and fixing in repair Toilet roll holder with flap of MAKE : JAQUAR or equivalent model of HINDWARE/MARK (as approved) complete all as specified and directed.
Petty repair to steel rolling shutter system of any size and description incl repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain incl necessary welding, greasing etc and making the shutter complete serviceable all as per existing pattern as specified
Supply and fixing in repair Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed.
FRIENDS ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .