REPAIR TO JOINERY DOOR WINDOW CUPBOARD PELMET BOX CURTAIN ROD ETC IN MD ACCN AND OTM ACCN AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed.

All as per serial item No. 1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each,complete all as specified and as directed.

Taking down shutters n. exc. 1 Sqm each,complete all as specified and as directed.

Taking down shutters exc.1 Sqm but n.exc. 2.00 Sqm each,complete all as specified and as directed.

S&F second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned, complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,complete all as specified and as directed.

S&F 35mm thick glazed and skeleton shutter open rebated and prepared to receive with sash bars edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR Part I Section 8 Clause No. 8.24(a),complete all as specified and as directed.

S&F for 30mm thick glazed and skeleton shutter open rebated and prepared to receive with sash bars edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR Part I Section 8 Clause No. 8.24(b),complete all as specified and as directed.

S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treate, complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening,complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004,complete all as specified and as directed.

S&F MS butt hinges 100mm size, medium weight cold rolled mild steel,complete all as specified and as directed.

S&F 100 mm length aluminum, anodised, barrel tower bolts of extruded section,complete all as specified and as directed.

S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section,complete all as specified and as directed.

S&F 100mm size of aluminum handles, cast type anodised,complete all as specified and as directed.

S&F 150 mm size of aluminum handles, cast type anodised,complete all as specified and as directed.

S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy,complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy,complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate,complete all as specified and as directed.

S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site complete all as directed.

S&F MS flat iron hold fasts fixed to chowkats confirming to Fe-310-O etc, complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work,complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position unframed work,complete all as specified and as directed.

M&L for 2nd class hardwood timber clean sawn fixed as in scantlings, purlins, trusses,complete all as specified and as directed.

S&F in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination fixed for cupboard and shelving/shutter,complete all as specified and as directed.

M&L for external teak wood lipping 12mm thick fixed with nails to particle board,complete all as specified and as directed.

M&L for 100 mm long aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and as directed.

M&L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and as directed.

M&L as in repair steel window of area n exc 2 sqm making in servicible condition (opening and closing of shutter) including necessary welding work,gas cutter, greasing including necessary box type hinges and handle if required etc, complete all specified and as directed.

M&L as in repair steel window of area n exc 1 sqm making in servicible condition (opening and closing of shutter) including necessary welding work,gas cutter, greasing including necessary box type hinges and handle if required etc,complete all specified and as directed.

S&F Harrison rails,anodised aluminium alloy plated with fixing brackets, stops, rollers etc,complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracksand making good holes with chalk whiting/putty, and brooming to remove all dirt etc and applying one coat of cement base paint on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting,complete all as specified and as directed.

S&F in repair MS medium weight 100mm butt hingescomplete all as specified and as directed.

S&F in repair of aluminium anodized,tower bolt 200 mm long,complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc,complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., ncl removing rubbing to a distance exceeding 100m, complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.

Material & Labour for two coats of oil bound distamper over a coat of primer on new plastered surfaces including preparation of surface,complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,complete all as specified and directed by Engr-in-Charge.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4), complete all as specified and as directed.

M&L for Glazed ceramic coloured designer seamless tiles 450X300X7 mm to 8mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM (1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in CM (1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM (1:4) and taking out existing tiles, complete all as specified and directed by Engineer-in-Charge.

P .BANERJEE AND CO (BID ID -3340982)

DANATION CONSTRUCTIONS (BID ID -3337422)

M/S MBS TRADING CO (BID ID -3337529)

M/S KUMAR AVINASH (BID ID -3339805)

M/S Subhadip Enterprise (BID ID -3340152)

LALAN SHARMA (BID ID -3340005)