Eco-Park at Koyambedu

Amount

Clearing scrub Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, Removing of all rubbish, lead upto 50m , Transportation, and labour charges etc., complete complying with standard specification.

Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge.

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 3 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers.

Supplying and filling approved RIVER SAND of specified quality for sand pits in play zone area. The rate including the cost of sand, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, loading, unloading, spreading in layer not exceeding 150 mm thick, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified level all complete and as per the standard specification.

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 sand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Providing and laying R.R MASONRY using cement mortar 1:5 (1 Cement: 5 MSand) in both substructure for all depths & heights including the cost of materials, labour,tools and tackles, scaffolding/staging, sampling and testing, cutting and laying of RR Stones providing recesses, making openings of any shape and size, embedding the fittings,curing, etc. all complete as per specifications, and as directed by Engineer-in-Charge.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine river sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering 15 mm thick for external surfaces with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supply and applying water proofing treatment on external and Internal surface at UG Sump raft, raft sides, inner & external walls etc. using cement admixed with water proofing compound in the following order. i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement. ii) Supply and Fixing of 50 long 18 mm dia GI nozzles in the hole of about half the depth of member size along construction joints, and honey comb areas at a spacing not more than 1m c/c. iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement. iv) Sealing & cutting of nozzles and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

v)Supply and applying one coat of TAPECRETE Acrylic Polymer Modified Cementitious Slurry Coat over well prepared surface as a Primer and applying CICO CORCHEM 206 - I Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm over TAPECRETE slurry coat applied surface. vi) Lay protective plaster layer with 20 mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand) admixed with Normal setting integral Waterproofing compound CICO NO.1 at the rate of 2% by weight of cement over the third coat of brush topping.

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. The rate including cost of all materials, brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Weathering course-using broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complete complying with relevant standard specification and as directed by the Engineer-in-charge

Providing vaccum de-watered flooring operation consisting of providing side shuttering with MS channels, angles to the required levels, Vibrating the concrete by using screed vibrator, de-watering using vacuum pumps by suction method and finishing the top surface to required level and grade using skim floaters/discs/power trowels. (M30 grade concrete will be paid under relavent item). The above works including for mechanical / power trovelling, Providing with 200 micron thick polythene sheet over the PCC surface,providing and mixing Graded fibrillated 100% virgin poly propelene fibres in concrete at the rate of 0.90 kg/cum as per manufacturers specifications, for providing and mixing non - metallic monolithic surface floor hardening compound in concrete at the rate of 5.0kg/m2 as per manufacturers' specifications and for cutting grooves of size 6mmx10mm at control joints and filling the grooves with Sealent (Colpor - 200 from Fosroc chemicals or Poly sulphide sealant (Pedilite / BASF or equivalent make) The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, smooth finishing, application, wastage, equipment, tools and plants, fuel, consumables, curing as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying of Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. (Including Skirting work)

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Providing Glazed Mosaic Tiles 200 X 200 mm of size 6mm thick flooring approved make and quality with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Providing and laying EPDM Flooring (Ethylene Propylene Diene Monomer) of 36mm thickness with proper laying materials of approved sample as per design / drawing laid compacting, levelling to required slope, finishing neatly. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc. complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc., The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Suppling and laying of first quality Best Mangalore Tiles for sloped roofs ( as per approved pattern showing the drawing not less than 18 mm thickness ) on roofs jointed with proper adhesive materials / 1:3 lime cement mortor for laying the tiles etc., The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying flooring with best quality approved colour Granite Slab, (Multi - Colour Granite ) not less than 18 mm thick of size not less than 1200 X 600mm machine cut and set in CM 1:4 20 mm thick topped white cement slurry (for surface contact of the bottom of the slab as per approved pattern including the finish joints with matching shade cement slurry cutting edge chamfering and polishing rough medium nice and tin oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportation charges, loading & unloading, preparation of surfaces necessary hacking in RCC surfaces cutting to required shape, edges, tools and plants curing, cleaning, acid wash over finished surface protection with Gypsum / pop layer over plastic sheet and removing the same before handling over as complete with all respect complying with relevant standard specification and as directed by the Engineer in charge.

Supply & Laying flooring with best quality approved colour Granite Slab, (Black ribbed / Black Leather granite ) not less than 18 mm thick of size not less than 1200 X 600mm machine cut and set in CM 1:4 20 mm thick topped white cement slurry (for surface contact of the bottom of the slab as per approved pattern including the finish joints with matching shade cement slurry cutting edge chamfering and polishing rough medium nice and tin oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportation charges, loading & unloading charges, preparation of surfaces necessary hacking in RCC surfaces cutting to required shape, edges, tools and plants curing, cleaning, acid wash over finished surface protection with Gypsum / pop layer over plastic sheet and removing the same before handling over as complete with all respect complying with relevant standard specification and as directed by the Engineer in charge

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge

Supply & Laying with the best quality approved kotta stone slab not less than 20mm thick and the size of slab in general not less than 1200 X 600 mm machine cut and machine high pre - polished set in C.M 1:4 20 mm thick with white cement sluury for surface contact of the bottom of the kotta slab as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with white cement sluury, cutting, edge chamfering and polishing rough, medium nice and acid wash and tin - oxide polish. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning acid wash over finished surfaces, protection with Gypsum / Pop layer over plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client / Engineer in Charge

Supply & Laying with the best quality approved Jaismaler stone yellow colour not less than 20mm thick and the size of slab in general not less than 1200 X 600 mm machine cut and machine high pre - polished set in C.M 1:4 20 mm thick with white cement sluury for surface contact of the bottom of the kotta slab as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with white cement sluury, cutting, edge chamfering and polishing rough, medium nice and acid wash and tin - oxide polish. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning acid wash over finished surfaces, protection with Gypsum / Pop layer over plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client / Engineer in Charge

Supplying and laying of Flooring with Joint free Duratech tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supplying and laying 100x100x60mm thick grey& Black & red colour Precast concrete Cobble stone of approved sample as per design / drawing laid fixed over cement mortar 1:3 ratio with curing, compacting, levelling to required slope, finishing neatly. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading and all incidentals etc., complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying Super Paver Shot - Blasted Grey & Black colour 400 X400X 80 mm thick of approved sample as per design / drawing made of M40 concrete - 80 mm thick including transportation of the blocks to the site preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying Super Paver Shot - Blasted Combi Paver set of 5 piece (100,125,175,225,275 X 200) of 80mm thick with colour combination of grey and Black of approved sample as per designed Pattern / drawing made of M40 concrete - 80 mm thick including transportation of the blocks to the site preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying Tamin Paver Block with pattern 80mm thick, Grey , Black and Red colour of approved sample as per designed Pattern / drawing made of M40 concrete - 80 mm thick including transportation of the blocks to the site preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying to required line and grade as per the drawing cement concrete grass paver blocks of M 30 grade 60 mm thick laid over the Mixing of Red Earth, sand and manure cushion of 100mm thick. The size and the shape of the concrete blocks had to be approved before sourcing / manufacturing the same. The aggregate used for the manufacture of the grass paver blocks shall be sound and free from soft apiecces. The proportion of the coarse aggregate in the mix is typically 40 percent and the fine aggregate shall be 60%. The size of the coarse aggregate should lie between 6mm and 12mm and the gradation should be in the recommended range for cement concrete mixes in general. The paver blocks shall be compacted using a light tandem roller or plate compactor till the required grade and line is achieved. The rate shall include cost of Paver blocks , Cost of red earth and Manure mixing, laying of paver blocks, leveling, loading & unloading, Transportation and labour charges etc., complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying and laying Besant Betons Beach paver Block 500 x330 x 80 mm thick laid over the Mixing of Red Earth, sand and manure cushion of 100mm thick. The size and the shape of the Gravel stone had to be approved before sourcing / manufacturing the same. The size of the Gravel stone should lie between 6mm and 12mm and the gradation should be in the recommended range for cement concrete mixes in general. The paver blocks shall be compacted using a light tandem roller or plate compactor till the required grade and line is achieved. The rate shall include Cost of red earth and Manure mixing, laying of Besant Betons Beach paver Block , leveling, loading & unloading, Transportation and labour charges etc., complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying and Fixing of Pebble stone flooring in walking track with 30 mm thick Cement mortor 1:3 ratio base layer and fixing the sone with cement slurry over the base mortor surface as per the pattern drawing given by the department officers the rate including cost of gravel stone cement mortor, labour charges transportation loading & unloading, curing, etc.,completed as per the standardspecification and as directed by the Engineer in Charge

Supplying and laying of gravel stone / Pebble stone in walking track using M. Sand filling with 180mm thick base layer. As per pattern rawing given by the department officers the rate including of gravelstone, labour charges, transportation, Loading & unloading and curing etc., as per the standadrd Specification and as directed by the Departmental officers

Supplying and Laying of Shadarali Rough Granite Grey colour of 40 -50 mm thick of required size approved quality and colour, laid over the Mixing of Red Earth, sand and manure cushion of 80mm thick. The rough granite shall be compacted using a light tandem roller or plate compactor till the required grade and line is achieved. The rate shall include cost of rough granite, Cost of red earth and Manure mixing, labour charges for laying, leveling, loading & unloading and Transport charges etc., complete complying with standard specifications and as directed by the Engineer-in-charge.

Providing and laying Wall Cladding with 6mm thick HPL sheet (High Pressure Laminated sheet) with structural members of approved sample as per design / drawing laid adhesive material levelling to finishing neat and all incidentals etc., The rate including cost of all materials, transport charges, labour charges and loading & unloading charges etc.,. complete complying with standard specifications and as directed by the Engineer-in-charge..

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Providing guildeline road marking kerb painting (special acrylic medium pigmented ) involving cleaning the surface free of dirt and loose particles applying one coat of primer and applying one layer of 20 to 25 microns. Rate shall include for all materials & labour components etc., as complete all respects complying with relevant IRC specifications, as directed by the Engineer-in-charge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Gazebo roofs,& pavilion with seating area Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections conforming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes. The rate including cost of all materials, labour chanrges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. All MS members shall be painted with one coat of zinc chromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval.

Supplying and Fixing Childrens Multi play Equipments in Ankidyne / Equivalent Brand at 5feet-7feet height with product area 19 ft X 17 ft for 10 to 15 kids of 5 -12 years old played at a time and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Kids Funstation

Rope Climber

See Saw

Swing

Merry go Round

Totlets see saw

Totlets swing

Totlets spring Seating

Supplying and Fixing Outdoor Gym Equipments in approved make and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Double air walker

Manual Outdoor Chest Press

Outdoor Leg press twister

Four shoulder Wheel

ABS Bord Duo

Combination set of Gym

Pull - up Station

UPVC Window :Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from the profile the size of outer frame 60mm x58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the Departmental Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on wor

Foamed PVC Door frame : Specification: Providing factory made Pre Laminated FPVC Door Frame of the size 105 X 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre jointed with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Fasteners of 3 nos. to be provided for each vertical member, GI stiffners of ( U channel of size 29 X 9, 1mm, 150mm long) - 3 Nos at hinge point, Frame Reinforcement of (U' GI channel of size 46 X 22 X 0.6mm), bottom tie rod of ('U' GI channel Size of 15 X 15 X 1mm ), etc., Complete complying with the standard Specification. the door frame should be got approved from the Executive before use on work Providing of 35mm thick factory made pre - laminated ABS ( Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent desings consisting of all round frame made out of water proof solid PVC bar of size 20 X 32 mm reinforced by 32 X 32 mm 2 nos ., for vertical made out of LVL core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre- laminated ABS sheets thickness of 1.5mm PVC edge bending of size 0.45mm on the vertical sides. hardware made out of steels coated butterfly hinges - 3nos for each shutter and ISI make SS round lock Complete complying with the standadrd Specification . the door shutter and frame should be got approved from the Departmental Engineer before on use

Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Client / Engineer-in-charge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Supplying and Fixing of Rolling shutter manual of size 2.45 X 2.1 M M.S Laths of size 80 X 120 mm Interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guages, and arrangements for inside and outside locking with push and pull operation to be suitable size and shape as per drawings etc., complete including the cost of providing and fixing necessary 27.5 cm long good quality wire springs grade No 2 and M.s top cover of 1.2 mm thickness for rolling Shutter the rate shall be inclusive of one coat of red oxide primer and two coats of synthetic enamel paint of approved quality and colour. rate including all material, labour charges wastages necessary lead and lifts transportation charges loading and unloading charges scaffoldingb stagingb installation charges as complete with all respect complying with relevent standard specification and as directed by the Engineer in Charge

Supplying and fixing of Black colour Granite ball Shaped bollard with height 2 -3 feet tall as per required area it includes material, transport, labour charges,complete as per specifications and as directed by Engineer-in-Charge.

Supplying and fixing of sign boards with 75mm thick MS Tubular Section with board - Adhesive Laminated Polyster (B-7541 as per ISO - 7010 fixed in dense concrete of depth 2' feet it includes material cost, labour charges, transport, etc.,complete as per specifications and as directed by Engineer-in-Charge.

Supplying and fixing of Metallic Sculptures of brass or equivalent material over a concrete surface of required depth as per drawings with proper curing compacting etc., the cost includes material cost, labour charges, transport charges etc.,complete as per specifications and as directed by Engineer-in-Charge.

Providing and laying in position Recharge Shaft with mixture of Pebbles, Sand , 40mm & down size graded aggregate for levelling course/pavement/fill under footings,raft, pavement etc., for all depths including all tools and tackles, labour and material charges, curing, compacting, in any shape, level, thickness, position and finishing the surface smooth/rough etc., complete as directed by Engineer-in-Charge

Providing and Fixing Precast slab of 100 mm thick in Cement Concrete 1:2:4 using 20 mm thick hard broken stone jelly and M.Sand including the cost of reinforcements and Fabrication charges, moulding, curing, finishing and fixing in position neatly etc., complete complying with standard specification and as directed by the departmental officers

Supplying and laying of Rain water harvesting pit earth work excavation, 1200mm dia precast rings with spacesser 50mm, with coarse sand filling, 20 mm and 40 mm aggregate fillings, Boulder fillings manhole cover with precast perforated slab and PVC pipe fittings covered with geotextile memberane upto depth., with transport, material cost, labour all complete as per specifications and as directed by Engineer-in-Charge..

Supplying and Laying of Syntax tank with proper fixation as per design / drawing position, the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supply of Compactor Bin 1100 litres made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

Supplying and Laying of Wall Mural of approved designed Pattern / drawing laid fixed over surface cleaned portion of required area done with cement mortor, ceramic coating, antique copper coating, finally MRF P / U coating and any other colour pigments it includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supplying and Laying of Textured Paint / Any other equivalent ornamentation with proper design / drawing position, the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supplying and Laying of Alluminium and Reflective Vinyl Name board with proper design / drawing position, the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

LANDSCAPE PLANTING

Supplying and Stacking of red earth at site to the departmental guage for Premeasurements which is of light textured, crystalline, porous and firable and not of generally acidic or neutral but not of alkaline and should not of alkaline and shoulde be fertile. The rate including seignior age charges, cost of red earth, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Supplying and stacking of river sand (supply & stacking of sand at site to the depatmental guage for premeasurements obtained from natural disintegrated rock which has been deposited by streams or glacial agenciesed of hard silicons materails and should be clean, sharp and angular type free of adherent coatings). The rate including cost of river sand, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Supply of well decomposed farm yard Manure in a powdery form devoid of soil sand, stones, plastics and other materials highly nutrient and which supports plant Growth. The rate including cost of Manure, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Mixing charges of red soil, sand and manure uniformly (2:1:1) for preparation of soil Mixture (excluding material cost). The rate including labour charges for measuring and mixing charges etc., complete and as directed by Engineer-in-charge.

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness. The rate including cost of hire charges for roller and labour charges for Spreading of redsoil etc., complete and as directed by Engineer-in-charge.

Supplying and Planting Tabebuia rosea tree of 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Terminalia mentalis 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Cassia fistula 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Neolamarica cadamba 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Lagaerstroemia flosreginae purple 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Spathodea 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Sitha ashoka 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Shembagam tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Fillicium deapiens 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bigonia megapotamica 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bahunia purpura 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Phoenix tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting washingtonia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Royal palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting foxtail palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting kentia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting brassia actinophylla 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Callophyllum inophyllum tree of 7'-8' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Thespesia populenea tree of 7'-8' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria white tree of 5' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria red tree of 5' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Plumeria pink tree of 5' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria pudica tree of 6' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Golden bamboo tree of 6' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Black bamboo tree of 6' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Latania rubra plam red tree of 5' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bottle bursh tree of 5' height by excavating 600 X 600 mm size and 750 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 750 mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Caesalpinia pulcheriamia plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nerium oleander white plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nerium oleander pink plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nerium dwarf plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Tabernum montana plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Hibisus viceroy plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Hamlia pantas plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Heliconia psittacorum dwarf plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ixora singaporenisis pink plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ixora dwarf ,plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ixora singaporenisis red plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Eugenia plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Jatropha plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Allamanda plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nikodia plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Meyenia erecta plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Rhapis palm plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting golden duranda plant of 2' Height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting pentanus grass plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Tmc mini plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting bougainvilla plant of 2.5' Height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Spider lilly plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Alpinia zerumbet plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Table palm plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting sun palm plant of 2' Height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting alocasia plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Boston ferns plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting asphargus plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Dianella plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Crotons plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Drecena mahatma plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Philodendron xanadu plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Philodendron selloum plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Alternathera plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Planting Money plant (creapers) plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Turfing Mexican grass over a soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 230mm thick. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Turfing Shade grass over a soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 230mm thick. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and Turfing Doop grass over a soil mixture of ratio 2:1:1 ( 2 Part of red earth, 1 part of cow manure and 1 part of sand) up to 230mm thick. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

PLUMBING WORKS

supplying,installing,testing and commisioning the best quality approved make of white glazed floor mounted european water closet with inbuid porcelin cistern 6/3 LPF and wash basin for physically challenge persons (hindware -matrix -70002)with necc0esary grap railes,hinged railes for support,pan connecter bend ,checknut,stopcock etc,. colour solid seat and cover with polythene buffer and flap,CP flanges, CP bolts and nuts,brackets with nuts and boults wall flanges etc, complete ,wash basin shall include 15mm dia CP liver oprareted piller cock with waste coupling , 32mm dia CP cbottle trap with extension pipe,supporting bracket with neccesary steel to support basin 1 No,15mm CP angle valve with 450mm long CP connection pipe and CP wall flamnges all of approved make etc., complete complying with standard specification and as directed by the department officers.the quality and mak of EWC & wash basin with full se should be got approved by concern department Engineer before use on work.

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.e Engineer-in-Charge.

Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work.

supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work

Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc. complete, complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work.

Supplying and fixing in position Mirror of size 500x450mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Supplying,installing,testing and commissioning of approved make CONCELD STOP COCK for toilet including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work.

Supplying, laying, jointing and testing of the following sizes of UPVC pipes SCH - 80 of approved quality and best variety conforming to I.S. and with I.S.I mark, including cutting, threading and fixing to UPVC specials, laid properly to alignment but excluding the cost of such specials and fixing to wall with necessary teak - Wood Plugs, PVC Clamps and screws,making holes on the wall or drilling holes in the roof and making good the dismantled portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of pipes and specials should be got approved by Executive Engineer before use on work.

40 mm dia

50 mm dia

75 mm dia

110 mm dia

Supplying & fixing in position C.I.Nahini trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

110 x 75 mm dia (20 mm water seal)

Supplying and fixing in position the best quality and variety sizes PVC soil waste pipes 6Kg cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.

160 mm dia(Soil Waste pipe)

110 mm dia(Soil Waste pipe)

75 mm dia(Waste pipe)

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Constructing brick masonry manhole with second sort ground moulded (Chamber burnt) bricks in CM 1:5 (one of cement, fivr of sand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification.

Supplying and fixing in position the best quality and variety sizes PVC soil waste pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.

110 mm dia

Supply & Laying jointing test testing & commissioning of approved make PVC heavy duty pipes class III 6kg/CM2 in ground floor including excavation & backfilling etc..,

160 mm dia

supply & fixing of C.I rain water grating the size of 225*225 mm for the terrace rain water withtrough as shown in the consultant drwing the gratting should be got approved by the concern department engineer.

Construction of Rain water recharge well (1200mm dia) as per consultant drawing with neccesary connection, (quantation rate)earth work- digging the well for recharge well supply and installation of rainfoced concrete ring -4 feet OD & 1 feet hight, 75 mm think -10 no's supply and installation of inforced concrete slao 4 feet in dia 200 mm thick, and 25 mm perforated -8 mm mild street rods used for reinforcement -1" perforated -1no's supply and installation of rainfoced concreate closing slap 75 mm thick, 8 mm mild steel rods used for rainforcement with 600 mm *600 mm square heavy duty PERFORATED manhole cover.filtration media installation for recharge well unit;40 mm crushed stones-0.5 cum, 20 mm crushed stone -0.5cum, brick sates -0.5 cum,fine sand 0.5 cub mtr,mixture of brick bats.

Supplying, laying, jointing and testing of Pipe : UPVC - SCH 80 confirming to I.S of approved quality of the following sizes including cutting and fixing to UPVC specials using adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,GI Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges etc., complete complying with standard specification and as directed by the Department officers. The quality and make of pipes and specials should be got approved by Executive Engineer before use on work.

20 mm dia

25 mm dia

Supplying, laying, jointing and testing of Pipe : UPVC - SCH 80 confirming to I.S of approved quality of the following sizes including cutting and fixing to UPVC specials using adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,GI Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges etc., complete complying with standard specification and as directed by the Department officers. The quality and make of pipes and specials should be got approved by Executive Engineer before use on work.

32 mm dia

40 mm dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.

25 mm dia

32 mm dia

40 mm dia

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge. from Sump to OHT

Supplying, laying, jointing, testing & Commissioning of UPVC Schedule 80 pressure pipes Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The rate shall include necessary earth work excavation, cost of fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes in shaft. (For under ground external water supply piping.)

40 mm dia upvc-6 kg ( PRM to OHT )

32 mm dia for Irrigation

40 mm dia for Irrigation

50 mm dia for Irrigation

65 mm dia for Irrigation

BORE WELLS

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs.

Reaming from 200mm dia pilot bore to 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level

Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992

200mm dia CS ( plain pipe

200mm dia RS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.

200mm dia CS

200mm dia RS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.

IRRIGATION WORKS

Supplying, laying, jointing, testing & Commissioning of UPVC Schedule 80 pressure pipes Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The rate shall include necessary earth work excavation, cost of fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes in shaft. (For under ground external water supply piping.)

UPVC Pipe 65mm dia

UPVC Pipe 50mm dia

UPVC Pipe 40mm dia

UPVC Pipe 32mm dia

UPVC Pipe 25mm dia

UPVC Pipe 20mm dia

Supply, Fixing & Commissioning of flexible,16mm Blank tubing - XT Drip Line Blank With Greater Flexibility is Easierr to Install & Saves Time , and resistance to UV damage and algae growth brown in colour and wall thickness 1.2mm, pressure rating 0.58 to 4.14 Bar etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply, Fixing & Commissioning of Emitters pressure compensating for Consistent & Reliable Flow with self flushing emitter, and selfpiercing barbs, flow rates 2 lph or 4 lph or 8 lph UV resistant colour coded with working pressure 1.0 to 3.5bar etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply, Fixing & Commissioning of flexible 16mm inline tubing PC Drippers with resistance to UV damage, algae growth brown in colour, Longer lateral run lengh with flow rate 2.3lph / 4.0 lph, pressure rating 0.58 to 4.1 bar , Dripper Spacing at 30 cm / 45 cm Spacing wall thickness 1.2mm etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply, Fixing & Commissioning of flexible 2" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc.,complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 88 gpm (20m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 26 gpm (6m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 40mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steal Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion -Resistant of TIE DOWN STAKE etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Gromatetake off Connects XF Series Drip Line and Blank Tubing to PVC Mainlines at Low Pressures. 17mm GTO etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm Tee . etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of High Quality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - Obtrusive Brown Colored Fittings of 17mm COUPLING. etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 17mm End cap S Type for dripline closure at the end of the dripline etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 4.0m -7.3m at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 4.0m -7.3m at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures.etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic.O-ring Slip Clutch,Racheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID Plugs,Flow Stop Available,Non-potable water indication available etc., Supply,Fixing & commissioning of Imported HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of UPVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10 etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of UPVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of UPVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 40mm. with pressure rating PN 10 etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of a double acting air and vaccum release 2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 KSC etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions @ TTop Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 2.5" Disc Filter with capacity 40m3/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Monobloc pumpset of having discharge and head of design flow , UPVC sch 40 - suction & delivery manifold and mounted on a baseframe with proper supports etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. Duty of Pump : 4.00 LPS Pressure Head Range = 40 - 45 Mtr No. of Pumps : 1 Working + 0 Standby

Supply,Fixing & commissioning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL / Star Delta Starter MUG10 (L&T make),start / stop push buttons (L&T make), Ammeter (AE make), Single phase preventor (Minilec make), Voltmeter (AE make) , Indicating lamps (L & T make), MCB (L & T make), Dry level guard sensor (Minilec make) etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on the pump capacity. The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 2.5'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 3'' Non Return Valve to prevent back flow have flap type or spring type with pressure rating of PN 10 etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & Commissioning of Direct burial 14 Awg x 2 Maxi cable with PVC insulated UL stndard 493 with impregnated polyethene jacket and soft annealed tin coated copper confirming to ASTM B-33 for two way communication between decoder controller and decoders etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning Of Two wire control system without Decoder ESP-LX IVM having Two way Communication between controller and smart valve,supports up to 60 stations standard Up to four 2-Wire paths, plus flow sensing and advanced flow management tools. supports upto 5 flow sensor inputs and removable front panel is programmable under battery power. water management features like: • Learn Flow utility and fl ow usage totalizer help optimize water usage, • FloWatch™ protection for high and low flow conditions , FloManager™ manages hydraulic demand, make full use of available water to turn on as many stations as possible without exceeding water supply and reducing the total time to complete irrigation cycles. SimulStations™ allows stations to operate at the same time; up to 8 with LX-IVM • Cycle+Soak™ by station, • Rain Delay up to 30 days, • 365-Day Calendar Day Off (up to 5 days), • Station Delay by program, • Normally Open or Normally Closed Master, Valves programmable by station; up to 5 with LX-IVM • Optional Weather Sensors are programmable by station to prevent or pause watering; up to 4 with LX-IVM. • Station Run Time: 0 min. to 96 hrs. • Seasonal Adjust: 0% to 300% (96 hrs. maximum station run time), • 10 independent programs on the ESP-LXI IVM • 8 start times per program,• Program Day Cycles include Custom days of the week, Odd, Odd no 31st, Even, and Cyclical dates,• complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & Commissioning of IVM-SOL Interfaces (solenoid and decoder in one unit as interface with facility of Maximum Two Wire Connector Between the Solenoid valve & Communication Cable) with LX-IVM to control station valves and master valves as per specifications complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & Commissioning of IVM-OUT Interfaces with LX-IVM to manage 3rd party valves and external gear such as pump stations complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & Commissioning of IVM-SD for surge protection on the 2-Wire path as required with copper grounding rod, clamps, charcoal and all requisite accessories complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 40GPM ,max water temp. upto 42degree centigrade, 9V DC solenoid ( IVM-SOL Interfaces ) Without AC Coil ,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 100GPM ,max water temp. upto 42degree centigrade, 9V DC solenoid ( IVM-SOL Interfaces) Without AC Coil ,current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, 9V DC solenoid ( IVM-SOL Interfaces ) , Without AC Coil current rating 0.41A @50Hz,coil resistance 30ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 3'' Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10 KSC and maximum flow of 10 to 36 m3/h ,max water temp. upto 60°C with 9 VDC - 50 Hz,coil resistance 30ohm etc., etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of PRS-DIAL to Maintain constant outlet pressure between 1.04 to6.9 KSC etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications complete DBRY etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved complete RSD BEX etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

Supply,Fixing & commissioning of 9VDC Relay & 9V DC Coil With Stabilizer 300watts etc., complete, The rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge.

ELECTRICAL WORKS

TNEB METERING BOARD Supply,installation and commissioning of TNEB Meter Board suitable for 3 Phases 100 A service connection made up of suitable iron angel frame work of size 2 feet x 1.5 feet using angle iron of size 1 1/2" x 1 1/2 " x 1/4" rigidly fixed on wall covered with Hylem sheet of size 2 feet x 1.5 feet of 12 mm thickness with necessary bolts and nutts supports and Supply,installation and commissioning of 3 nos 100 A fuse units (500V) ,1 No Neutral link ,Copper flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection and to complete the work etc.

PARK LT PANEL

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. Incoming 1 No: 100A TPN 16 kA MCCB with Changover Switch Incomers shall have 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter and KWH meter). 1 set - LED type RYB,ON,OFF,TRIP indication lamps. Panel mounted Earth Leakage Relay with Leakage current display 1 set -100 /5A CT CL 1.0 10VA Outgoings: 8 Nos - 63 A 16KA TPN MCCB 2 Nos - Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S with RS485(For Shop-1 & Shop -2) Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. Note:-The panel should be having provision to monitor the On, Off, trip status BUS BAR RATING: 100A TPN 16 KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus. Earthing : 25 x 6mm Aluminium flat Cable Entry & Exit : Top Cable Gland Plate : 3mm thick MS sheets Note: All MCCBs shall have rotary handle mechanism and spreader wherever necessary.

Internal Identification Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (6Points / Coil ) (length of point 12 to 18 mtr) (SD-337)

Runs of Mains Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 2.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour.

Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.

Supply and run of 4R of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC conduit pipe concealed in wall with continuous earth wire connection of 1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V wire and making good of the concealed portion with suitable colour

Supply and laying of 2C X 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4C X 10 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4C X 16 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5C X 25 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5 x 70 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and Clamping of 4C X 16 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc

Supply and Clamping of 31/2C X 25 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc.

Supply and Clamping of 3.5 X 70 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc.

Supply and fixing of brass cable gland for 2C x 6 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 4C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 31/2C x 25 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 3.5 x 70 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and providing cable end termination of 3.5 x 25sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with eelctrical connection complete and etc to complete the work

Supply and providing cable end termination of 3.5 x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with eelctrical connection complete and etc to complete the work

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work

Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing on wall with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make )

Supply and erection 4 WAY 3 PHASE VDB of powder coated wall mounting TPN DB made of 1.6mm thick CRCA sheet steel dust and vermin proof enclosure with suitable size of bus bar with suitable bus insulators and sleeve for main and interconnecting Switchgear, earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel. ( For Power Distribution & Landscape Lighting) Incoming : 63 A 4P MCB - 1 No Outgoing : 32A TP MCB 10kA - 4 Nos

Supply,Erection, Testing and Commissioning of the following Type outdoor lighting distribution panel with individual segegration chamber with MCCBs / MCBs /ELCBs, / RCCBs , Phase segegration Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application IP65 as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement. Incomer 40 A TPN MCB with Timer control On/OFF Outgoing : 20 A DP RCCB -30mA - 12 Nos :

Supply and fixing of 3.66 metre length pole with 50W LED Light 250mm dia X 12thk MS base plate with 4 Nos of Elongated holes 38 x 19 to suit M16 bolts at cc 140 duly welded at the bottom and with concreting and construction on masonary pedestal with supply and fixing of post top latern fitting with necessary accessories with complete set. KL-Juno-7034

Supply,installation and commissioning of 6W LED Recess fitting on wall with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work KL-Sudo mini - 2755

Supply and fixing of 3x60W Flood Light fitting on 8mtr merlin pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL_Aston - 4202

Supply and fixing of down light 12W Light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-cylinmini - 3646

Supply and fixing of spike light 6W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-Trioscope - 7052

Supply and fixing of 3W Light fitting (IP67) Inground fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4092 - symmetrical Inground -

Supply and fixing of RGB under water 9X2W RGB underwater fountain light Ip68 with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4130

Supply and fixing of 9W LED Bollard Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:6951-Ritu Bollard

Supply and fixing of 3x3W LED Parula Bollard Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4724 Parula Bollard

Supply and fixing of 6W LED Surface mounted Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4724 Parula Bollard

Supply and fixing of 50W Street Light fitting on 6mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-4432 & 4783

Supply and fixing of 100W Street Light Dual arm fitting on 6mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-4434 & 4763

Supply,installation and commissioning of 1200mm 20W 6500 k, 4feet LED Tube Fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and etc to complete the work

Supply,installation and commissioning of 18W Square type recessed ,3000 K LED Down light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 meter rod with fan clamp with side plates and cross arm of size 450mm(18") (SD-106)

Supply,installation and commissioning of Exhaust Fans for 300 mm( l2") sweep (light duty) AC Exhaust fan and etc to complete with necessary wall opening and making good of the wall ( SD-114)

Supply,installation and commissioning 1no of 6A two Modular 5Pin socket, 1no 6A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection. Higher End

Supply,installation and commissioning 1no of 16A two Modular 5Pin socket, 1no 16A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection. Higher End

Supply, erection, testing, commissioning of 40KVA DG Set with Acoustic Enclosure with Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 100 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive.

Supply, Installation, Testing and commissioning of 16 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback.

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic) (Rate as per quotation enclosed)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4X6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Clamping of CAT 6 armoured cable in 50mm HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LNS unit and fan extra for the above rack.

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.

Supply and Instalatin for 2nos of 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up

Supply,Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

Supply & Installation of 30W 1way high efficiency high fidelity PA horn speaker

Supply & Installation of 325Watts high quality mixer amplifier with built in MP3 player in standard 19" rack mountable chassis.

Supply and Laying of 2core 1.5 Sqmm Armoured speaker cable with 25mm dia HDPE pipes

Supply of paging goose neck dynamic microphone

Eashaa Engineers