REPAIR/ REPLACEMENT OF FITTING/FIXTURES ALONGWITH CONNECTED ITEMS SUB MAIN WIRING AND SOLAR WATER HEATING SYSTEM IN OTM AND MD ACCN OF AGE E/M UNDER GE (WEST) DELHI CANTT-10

Amount

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc.) and making good disturbed surfaces of walls, floor etc complete all as specified and as directed.

M&L point wiring concealed in wall with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor two run and drawing in rigid PVC conduit in walls and on surface conduit for Beam/ceiling/cloumn portion FRLS grade, ISI marked ,terminal box of suitable thickness and with 3 mm thick hylum sheet cover as per required cuttings for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and making good to the disturb surfaces with cement, matching with existing color by painting complete all as specified for the following :-

One light/fan/bell point controlled by one by one way switch.

One light point controlled by two, two way switch.

One 3 pin socket outlet 5 hole 5 Ampon independent board.

All as per srl item No 2.03 but on Same board.

M & L for One power point in concealed conduit, with insulated stranded copper conductor cable 2.5 Sqmm single core two run and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm stranded conductor as earth wire one run connected dully to common earth complete all as specified and as directed.

M & L for One power point in concealed conduit with insulated stranded copper conductor cable 4 Sqmm single core two run and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire one run connected dully to common earth complete all as specified and as directed.

Supply and fix switch piano flush type 5/6 Amp SP one way complete all as specified and as directed.

Supply and fix switch piano flush type 5/6 Amp SP two way complete all as specified and as directed.

Supply and fix switch piano flush type 15/16 Amp SP one way complete all as specified and as directed.

Supply and fix socket outlet 5 pin 5/6 Amp flush type complete all as specified and as directed.

Supply and fix socket outlet 2 in 1,3 pin 5/15 Amp complete all as specified and as directed.

Supply and fix switch type normal electronic fan regulator 5 step, complete all as specified and as directed.

S&F lamp holder pvc/polycarbonate type with back plate complete all as specified and as directed.

S&F ceiling rose 3 phase pvc/polycarbonate isolated body complete all as specified and as directed.

Supply and fix bell push, flush type, 5/6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit complete all as specified and as directed for the following :-

One light/fan/bell point controlled by one way switch 5/6 amps.

One 3 pin 5/6 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5/6 Amps socket outlet point controlled by one way switch on same board.

One two way point controlled by 2 way switch 5 amps.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15/16 A Indepentent board complete all as specified and as directed.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 4.0 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 4.0 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15/16 A Indepentent board complete all as specified and as directed.

S&F modular switch 1 way 5/6 A, 1 module complete all as specified and as directed.

S&F modular switch 1 way 15/16 A,1 module complete all as specified and as directed.

S&F of modular socket outlet 5/6 A, 2/3 pin, combined 2 module complete all as specified and as directed.

S&F of modular socket outlet 15/16 A, 2/3 pin, combined 2 module complete all as specified and as directed.

S&F of modular switch 2 way 5/6A, 1 module, complete all as specified and as directed.

S&F modular Bell push 5/6A 1 module, complete all as specified and as directed.

M&L for Bell ding dong AC,230 volts,single pole complete all as specified and as directed..

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, of size 16.00 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular, complete including connection complete all as specified and as directed.

M&L in repair for Earthing complete with copper plate 60×60cm ×3.15mm thick electrode, burieddirectly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 20×3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth lead protected by medium grade 15 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil to a distance not exc. 50 Mtrs) complete all as specified and directed. Note:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be of pre-cast RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover all as specified or indicated including testing on completion all as specified and directed.

S & F in repair Air termination, single pointed, copper rod 12mm dia and 300mm long, including connections, complete all as specified and directed.

S & F in repair Test point terminal block made of gun metal or phosphorus bronze size 75 x75 x 25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw, complete all as specified and as directed.

M&L in repair of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar, funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, burieddirectly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-1 2009, connected to earthing test point, earth lead protected by medium grade 15 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil to a distance not exc. 50 Mtrs) all as specified and shown on plate No 5 of SSR – Part I 1991 complete all as specified and as directed. Note:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be of pre-cast RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover all as specified or indicated including testing on completion all as specified and directed.

M & L in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip complete all as specified and as directed.

Supply and fixing in repair suspended linear LED lights fitting 28/30 W, 5700K , 220V, AC comprises of aluminium extrusion, end caps and clutch wire suspension kit for suspended mounting with driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix in repair PVC insulated flexible cable three core Copper conductor of size 2.5 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and as directed.

Supply & fix in repair canopy for ceiling fans (Set of two) complete all as specified and as directed.

Taking down DBs, and sheet metal enclosure of any make and type from the site and making good to the disturbed surfaces complete all as specified and as directed.

Taking down MCBs, Main switch, etc of any make and type from the site and making good to the disturbed surfaces complete all as specified and as directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623, complete all as specified and as directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 complete all as specified and as directed. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S & F sheet metal enclosure MCB DB TPN 4 way with 100 Amps rated copper bus bar 415 volts with metal double door, IP-43, with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCB's as outgoings, including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good the disturbed surface to match with existing one, complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar 240 volts double door including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good the disturbed surface to match with existing one, complete all as specified and as directed.

Blank-

Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and as directed.

Supply and fixing in replacement MCB SP 6 to 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and as directed.

S&F SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and as directed.

S & F in repair Miniature circuit breaker (MCB), SPN 40 to 63 AMP, 10 KA, 240V, 'C' series complete all as specified and as directed.

S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and as directed.

S & F in repair Miniature circuit breaker (MCB), TPN 40 To 100 AMP , 10 KA, 240V, 'C' series complete all as specified and as directed.

S & F in repair MCB, FP, 63 Amps, 415 volts, 'C' series' 10 KA breaking capacity & connection complete all as specified and as directed.

S&F in repair Electronic constant current driver for LED fitting upto 36 watt, 240 volts, 50 Hz complete all as specified and as directed.

Taking down carefully sub main wiring of any make/size/type complete all as specified and as directed.

Supply, laying and drawing submain wiring in existing concealed PVC rigid conduit on walls 02 runs of single core x 6.00 sqmm (Main Cable and neutral) and one run of single core x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990, making good surface of disturbed area complete all as specified and directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to make it functional complete all as specified and as directed.

All as per item Ser No 51.00 herein-before but Size 4.00 Sqmm.

Supply, laying and drawing submain wiring in existing concealed PVC rigid conduit on walls 02 runs of single core x 10.00 sqmm (Main Cable and neutral) and one run of single core x 10.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990, making good surface of disturbed area complete all as specified and directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to make it functional complete all as specified and as directed.

M&L for taking down, replacement & refixing of motor of exhaust fan of 450 mm sweep of any type & make complete with super enamelled copper wire provisions of new nuts pin complete all as specified and as directed.

M&L for taking down, replacement & refixing of motor of exhaust fan of 300mm sweep of any type & make complete with super enamelled copper wire provisions of new nuts pin complete all as specified and as directed.

M&L for taking down, replacement & refixing of motor of Fresh Air Fan 200 to 300 mm sweep of any type & make complete with super enamelled copper wire provisions of new nuts pin complete all as specified and as directed.

Supply and fix in repair plug top 15-20 Amps 3 pin 230 volts complete all as specified and as directed.

Disconnecting from mains/taking out existing unserviceable/defective motor/pump of vertical submersible sewage pump of capacity 5 HP with guide rail and lifting chain from well, including disconnecting all electrical connections, transporting to repair workshop, and transporting back to site, re-installating, commissioning and testing, complete all as specified and as directed.

M & L for removing unserviceable burn out winding completely of 5 HP pump including insulating materials etc.and rewinding of the complete stator with super enameled copper wire of existing size applying proper insulation ‘F’ class varnish drying in oven, repair base plate, including nut, bolt for assembling, complete all as specified and as directed.

M & L for repair of 5 HP pump by replacing the defective impeller, shaft, bearing by new one, complete all as specified and as directed.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply & Fixing in Repair SS braided pipe of 12 mm (internal dia) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and as directed.

Supply & Fixing in Repair of inner shell stainless steel body including nut & bolt suitable for Geyser of 25 Ltr capacity, as per site requirement complete all as specified and as directed.

Supply & Fixing in Repair of copper heating element 1500 /2000watt (triangular/cup type), as per site requirement including assembly suitable for Geyser of 25 Ltr capacity complete all as specified and as directed.

Supply & Fixing in Repair thermostat/capillary suitable to work at water temperature 30° to 75° C, as per site requirement, electric cut up Geyser of 25 Ltr capacity complete all as specified and as directed.

Supply & Fixing in Repair Indicating lamp (red/green/yellow) complete suitable for Bajaj or as per site requirement as directed by Engr-in-charge Geyser of 25 Ltr capacity complete all as specified and as directed.

Supply & Fixing in Repair MS outer body with MS collar including top/bottom cover plates, nut & bolt suitable for Geyser of 25 Ltr capacity,as per site requirement complete all as specified and as directed.

S&F in replacement Apparatus assembly duly prewired without heating element and thermostat/thermal cutout of geyser storage type of different make for capacity 25 ltrs complete all as specified and as directed. (Make of spare parts shall be of existing make or as per samples as required).

Supply & Fixing in replacement of Geyser bottom and top cover for Geysers (confirming to IS) suitable for any make/capacity/type of Geysers installed at site duly painted with two quotes with enamel (Deco) paint of colour & shade complete all as specified and as directed.

M & L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity, removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning, dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete all as specified and as directed. Note:(a) Items required for replacement of U/S parts will be measured and paid separately under relevant item of BoQ" ).

M&L in repair louver shutter of exhaust fan suitable for 300 mm size at the height from 3mtr to 30 mtr height making good surface of distubed area complete all as specified and as directed. Note: Contractor shall arrange suitable T&P including necessary form work, scoffolding and safety measures to make it functional complete all as specified and directed.

All as per srl item No 71.00 here-in-before but of size 450 mm.

All as per srl item No 71.00 here-in-before but of size 560/600 mm.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix in repair metal sunken box for mounting modular switch/sockets of the following sizes :-

Box as per sample suitable for mounting one switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

Box as per sample suitable for mounting one switch 15 Amp and one 15 Amp socket dully cut for mounting as above complete all as specified and as directed.

Box as per sample suitable for mounting five switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

Box as per sample suitable for mounting eight switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

S&F in replacement of modular 3M inner plate with outer cover plate as per site requirement complete all as specified and as directed.

S&F in replacement of modular 4M inner plate with outer cover plate as per site requirement complete all as specified and as directed.

S&F in replacement of modular 6M inner plate with outer cover plate as per site requirement complete all as specified and as directed.

S&F in replacement of modular 12M inner plate with outer cover plate as per site requirement complete all as specified and as directed.

Supply & Fixing ceiling fan capacitor for 1200/1400 mm sweep 2.5/3.5 mfd complete all as specified and as directed.

Supply and fix in repair switch piano flush type 5 Amp SP one way complete all as specified and as directed.

Supply and fix in repair switch piano flush type 15 Amp SP one way complete all as specified and as directed.

Supply and fix in repair socket outlet 5 pin 5 Amp flush type complete all as specified and as directed.

Supply and fix in repair socket outlet 2 in 1,3 pin 5/15 Amps complete all as specified and as directed.

S & F in Repair of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.

S&F in replacement of chargeable Inverter type minimum 04 hrs battery backup 9 watt bulb as per site requirement complete all as specified and as directed.

Supply and fixing in repair decorative wall mounting light fixture with extruded glass difuser alongwith lamp holder, including 9 Watts LED bulb of 6500 K of B22 base and all accessories pre-wired including all connections, complete all as specified and as directed.

Supply and fixing in repair 15 Watt round LED panel recess mounting downlight in 4000-6500K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout as per site requirement, complete all as specified and as directed.

Supply and fix in repair LED batten luminaire surface mounted system wattage of 20 watts and system lumen efficacy=>100 lm/watt output, power factor=>0.9, color temperature 3000K- 6500 K ,voltage range - 150 to 270 volts AC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and as directed.

Supply and fix in repair LED batten luminaire surface mounted system wattage of 10 watts and system lumen=>100 lm/watt output, power factor=>0.9, color temperature 3000K- 6500 K and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and as directed.

S&F moulded case circuit breakers(MCCB) 250 Amps, 3 Pole, lcs=50 KA, with continuously adjustable electronic release, complete all as specified and as directed.

Supply & Fixing in Repair of MS down rod 300/450 mm for fixing of ceiling fan complete all as specified and as directed.

Supply & Fixing in Repair Ceiling fan blade 1200 mm sweep made up of aluminium body having provision of free size monting nuts/screw all as per requirement at site complete all as specified and as directed.

Supply & Fixing in repair MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm swwep ceiling fan complete all as specified and as directed.

S&F in repair of LED tube rod 20 Watt ultra bright glass with very high efficiency suited for instatllation in existing T-8 with G-13 lamp holder, complete all as specified and as directed.

Supply & Fixing in Repair modular AC Box with 20A SP mini MCB, Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and as directed.

Supply & Fixing in Repair Single core copper conductor cable 2.5 sqmm size, multistranded, FRLS, PVC insulated complete all as specified and as directed.

Supply & Fixing in Repair Single core copper conductor 1.5 sqmm size, multistranded, FRLS, PVC insulated complete all as specified and as directed.

Supply & Fixing in Repair Single core copper conductor 4.0 sqmm size, multistranded, FRLS, PVC insulated complete all as specified and as directed.

Supply & Fixing in Repair Single core copper conductor 6.0 sqmm size, multistranded, FRLS, PVC insulated complete all as specified and as directed.

Supply & Fixing in Repair Single core copper conductor 10.0 sqmm size, multistranded, FRLS, PVC insulated complete all as specified and as directed.

M&L for taking down & refixing and repair of BLDC ceiling fans of any type and make complete including repair of PCB & ball bearing as requirment of SKF/NBC make and provisions of new nuts and pins for 1200 sweep as per site reqiurement complete all as specified and as directed.

Supply and fixing in repair ultra bright compact 6 Watt round LED downlighter with high efficiency LED's idealy suited for low ceiling areas to give glare light IP-54 in 4000-6500K with integrated driver to deliver superior light output and uniformity utilising the latest LED technology, ceiling cutout as per site requirement, complete all as specified and as directed.

S&F in repair RCBO, 230 Volt, 40 Amp, 30mA, 50 Hz, with 10 kA short circuit capacity of Double pole for ensuring protection from leakage current, short circuit & over load, complete all as specified and as directed.

Supply and fix in replacement MCCB 100 Amps, 4 Pole 415 volts 16 KA 50 HZ complete all as specified and as directed.

S&F in replacement MCCB 4 pole 125 Amp, Icu = 16 KA, 415 volts, 50 Hz, type with thermal magnetic release duly connected with copper spreader links 04 Nos and proper size of lugs, nuts bolts and washers for proper connections complete all as specified and as directed.

All as per item Ser No 106.00 herein-before but MCCB 125 Amp 3 Pole.

All as per item Ser No 106.00 herein-before but 4 Pole 160 Amp.

S&F in repair exhaust fan blade metallic type of any make for size 450 mm sweep as per requirement at site complete all as specified and as directed. (As per sample)

S&F in repair exhaust fan blade metallic type of any make for size 300 mm sweep as per requirement at site complete all as specified and as directed. (As per sample)

S&F in repair PVC fresh air fan 225/250 mm blade as per sample, complete all as specified and as directed.

Taking down ceiling/exhaust fan, ceiling cable end, dismantling blades and removing fan and blades and refixng the same after repair work complete all as specified and as directed.

M&L for rewinding of ceiling fans of any type and make with super enamelled copper wire of appropriate gauge suiatble for existing make in the workshop including necessary lathe work on shaft, both sides of rewinding covered with high quality varnish, replacement of ball bearing and provisions of new nuts/pins including taking out old burnt wind of copper/aluminium complete all as specified and as directed.

All as per srl item No 113.00 here-in-before but exhaust fan of 200/230/300 mm sweep.

All as per srl item No 113.00 here-in-before but exhaust fan of size 450/550 mm sweep.

All as per srl item No 113.00 here-in-before but only overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components, except rewinding of starter winding complete all as specified and as directed.

Supply & Fixing in Repairs/Replacements rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

Supply & Fixing in replacement of Split Pin all as per sample complete all as specified and as directed.

Supply & Fixing in replacement Ball bearing of size 6201/6202 all as per sample complete all as specified and as directed.

Supply & Fixing in replacement of Gun metal bush of size 6201/6202 all as per sample complete all as specified and as directed.

M & L for preparation of old painted/rusted surfaces of 1200/1400 mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and as directed. NOTE:-All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate.

Supply & Fixing in Repair in new generation post-top-lantearn energy saving ,environmental friendly long life aeshetically designed with symmetrical light distrubution ,spun aluminium landscape luminaire with high power 40 W LEDs complete all as specified and as directed.

Supply and fixing LED security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F in repair exhaust fan body/frame metallic type of any make for size 450 mm sweep with mounting legs, nut,bolts, fastners complete for mounting as per requirement at site, complete all as specified and as directed. (As per sample)

S&F in repair exhaust fan body/frame metallic type of any make for size 300 mm sweep with mounting legs, nut,bolts, fastners complete for mounting as per requirement at site, complete all as specified and as directed. (As per sample)

S&F in repair PVC fresh air fan body/frame 225/250/300 mm, complete for mounting as per requirement at site, complete all as specified and as directed. (As per sample)

Supply and fix flat panel light aesthetically designed (2ft x2ft) LED flat panel for surface/recessed mounting type which provides soft-light and glare free symmetrical illumination 35/36 Watt fixture should have minimum efficacy at system level 100 lm/watt output, Colour temperature 4000-6500K, an operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and as directed.

Supply & Fixing in Repair call bell electric 240 volts, AC supply, Ding Dong type complete all as specified and as directed.

Supply and fix in repair switch Modular type 6 Amps one way 230V AC as per sample complete all as specified and as directed.

Supply and fix in repair switch Modular type 16 Amps one way 230V AC as per sample complete all as specified and as directed.

Supply and fix in repair Modular socket outlet 5 pin 6 Amp socket 2 module as per sample complete all as specified and as directed.

Supply and fix in repair Modular socket outlet 5 pin 16 Amp socket 2 module as per sample complete all as specified and as directed.

Supply and fix in repair Modular fan regulator 1 module as per sample complete all as specified and as directed.

Supply and fix in repair copper cable flexible 3 core PVC insulated of size 40/.0076 ll complete all as specified and as directed.

Supply & fix in repair PVC insulated flexible cable three core copper conductor of size 1.5 Sqmm ISI marked covered with white colour round insulation complete all as specified and as directed.

Supply and fix in repair, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC armoured, PVC sheathed 6 sq. mm nominal cross section, 2 core complete all as specified and as directed..

Supply and fix in repair hylum sheets 3 mm thick (ISI marked) of the following sizes :-

Sheet as per sample suitable for mounting one piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

Sheet as per sample suitable for mounting one piano switch 15 Amp and one 15 Amp socket dully cut for mounting as above complete all as specified and as directed.

Sheet as per sample suitable for mounting three piano switch 5 Amp dully cut for mounting as above complete all as specified and as directed.

Sheet as per sample suitable for mounting four piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

Sheet as per sample suitable for mounting five piano switch 5 Amp and one 5 Amp socket dully cut for mounting as above complete all as specified and as directed.

Supply and fix in repair 10 watts bulkhead fitting System level efficacy of the Luminary is =>100 lm/watt output, power factor =>0.9, Color Temperature 3000K-6500K, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and as directed.

Supply and fix in repairs LED bulb of 9 watt (B-22),with lumen efficacy>90 lm/W to >105 lm/W, 3.5 kv Voltage surge protection including dully connecting, fixing with all accessories complete all as specified and as directed.

Supply and fix in repair ceiling rose 3 phase PVC polycorbonate,insulated body complete all as specified and as directed.

Supply and fix switch piano flush type 5 Amp SP two way complete all as specified and as directed.

Supply and fix in repair switch type normal electronic fan regulator 5 step complete all as specified and as directed.

Supply and fix in repair bell push,flush type,5 amp complete all as specified and as directed.

Supply and fix in repair bell ding dong AC,230 volts,single pole complete all as specified and as directed.

Supply and fix in repair insulated body pvc , angle holder (metal ring) B22 type ISI marked complete all as specified and as directed.

Supply and fix in repair of SS combined 15 amp without Box complete all as specified and as directed.

Supply and fix in repair of SS combined 15 amp with Box complete all as specified and as directed.

Supply and fix in repair of SS combined 5 amp without Box complete all as specified and as directed.

Supply and fix in repair of SS combined 5 amp with Box complete all as specified and as directed.

Supply and fix in repair switch Modular single pole bell push 6 amps one module all as per sample complete all as specified and as directed.

S&F in replacement Post top lantern light of 20 watt lumen efficacy >=100 lumens/watt with die cast aluminium spigot, spun aluminium powder coated top cover, IP-65 protection all as per sample complete all as specified and as directed.

S&F in replacement 12 watt round/square recessed mounted downlighter led light all as per sample complete all as specified and as directed.

Supply in repairs/replacements of Self Adhesive PVC Electrical Insulation tape of size 1.80 cmX6.5 m X0.125 mm, mix colour box in a packet of 12 roll complete all as specified and as directed.

Supply in repairs/replacements of brass screw 1/2 inch to 1.5 inch in packet of 50 pcs complete all as specified and as directed.

Supply in repairs/replacements of Wall Rawl Plugs/Gitti in packets of 100 pcs as per sample complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame, 3 module all as per sample complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame, 4 module all as per sample complete all as specified and as directed.

Supply and fix in repair Modular white cover plate with frame, 6 module all as per sample complete all as specified and as directed.

M&L for making round hole in wall of 300mm sweep for kitchen exhaust fan, dully with drill cutter machine/manually and making good to the disturbed surfaces with cement and painting dully matching with existing wall color at site complete all as specified and as directed. Note:- Round hole in wall to be made for multistory upto G+3 buildings, contractor are to be arrange necessary T&P and items for easily carryout of the work with full safety precautions.

Supply and fix in repair wall mounting fan of sweep 400mm, 1350 rpm, 65 watt with copper motor rust proof body complete all as specified and as directed.

Supply and fixing in repair PCB card for BLDC ceiling fan size 1200 mm sweep with nominal voltage 230V AC, power consumption 28 to 32 watt, compatible with single phase BLDC motors, power factor > 0.95, Min air delivery 210 CFM all as per site reqmt/sample complete all as specified and as directed.

M&L for servicing, descaling with descaling agents (chemical solvents) for removing all silt/rust of the solar water heater 300/500 LPD capacity solar water heating system and making good any leakages, replacement of gaskets etc testing complete and making the plant functional including replacement of minor spares parts for complete system (rubber gaskets , flange dummy, flange brass, hose clamps of suitable sizes, descaling agent, glass rubber beedings etc.,) complete all as specified and as directed. Note: Rates of minor spares are deemed to be included in quoted rate.

All as per srl item No 163.00 here-in-before but solar water heater of capacity 100/200 LPD.

S & F in repair copper heating element for solar water system, 3kW, embedded copper, sheathed tubular with theremostat as per site requirement complete all as specified and as directed.

Supply & Fix in Repair toughened glass of thickness 4mm suitable for solar hot water system, complete all as specified and as directed.

M&L for taking down hot water tank 300/500 ltrs capacity and replacement of PUF insulation 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and as directed.

M&L for taking down hot water tank 50/100 ltrs capacity and replacement of PUF insulation 50 mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and as directed.

M&L for cylindrical type hot water tank of capacity 500 ltrs per day made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down old unsv tank complete all as specified and as directed.

M&L for cylindrical type hot water tank of capacity 300 ltrs per day made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down old unsv one, complete all as specified and as directed.

M&L for cylindrical type hot water tank of capacity 100 ltrs per day made of stainless steel sheet 1mm thick including insulation with PUF 50 mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down unsv one, complete all as specified and as directed.

Supply & Fix in Repair hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system complete all as specified and as directed.

Supply & Fix in Repair temparature gauge ISI marked dial type having range 0 to 100 ºC complete all as specified and as directed.

Supply & Fix in Repair water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint complete all as specified and as directed.

M&L for preparation of surfaces of Solar water heater plant of capacity 300/500 LPD, hot water tank, make up water tank, staging for hot/cold water tank, with different colors following the color code system or as directed by the site-in-charge. Job includes removing the old paint by rubbing, brushing and applying one coat of red oxide zinc chrome primer and two coats of Synthetic Enamel Paint (1st grade quality) complete all as specified and as directed.

All as per srl item No 174.00 here-in-before but solar water heater of capacity 100/200 LPD.

M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system for open surface 15/20/25 mm bore pipe on roofs/walls of single/multistorey bldgs, complete incl taking down unsv one complete all as specified and as directed.

Supply & Fix in Repair solar plate collector flat type of capacity 100/125 LPD, including glass cover plate, aluminium collector housing, absorber, copper tubes, suitable insulation complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as required of capacity 500 ltrs including making inlet and outlet pipe connection and all accessories along with one PVC 20 mm bore float valve incl taking down old unsv one, complete all as specified and as directed.

S & F in repair 25 mm Gun-metal gate valves,with iron wheelhead, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair 20 mm Gun-metal gate valves,with iron wheelhead, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair 3 layer 15/16 mm nominal dia Hot PP-R polypropylene random copolymer pipes SDR 7.4 UV stabilsed and antimicrobial welded having thermal stability for hot & cold water suppy including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. with all fitiings like socket, reducer,bend etc.fixed complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and as directed.

M&L for galvanised steel (Gl) tubing medium grade 25 mm bore with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.), fixed complete to walls and ceiling or laid in floors including making connection with existing pipeline incl taking down old unsv one complete all as specified and as directed.

M&L for galvanised steel (Gl) tubing medium grade 20 mm bore with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.), fixed complete to walls and ceiling or laid in floors including making connection with existing pipeline incl taking down old unsv one complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as required of capacity 1000 ltrs including making inlet and outlet pipe connection and all accessories along with one PVC 20 mm bore float valve incl taking down old unsv one, complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as required of capacity 300 ltrs including making inlet and outlet pipe connection and all accessories along with one PVC 20 mm bore float valve incl taking down old unsv one, complete all as specified and directed.

M&L for disconnecting all electrical and water connections from hot/cold water tank and reinstalling after fabrication work with MS angle iron, flats, plates, clamps including nuts, bolts, washers, welding, bending, drilling holes for bolts in any shape or size as indicated or directed for making staging of the hot/cold water tank including all civil wks including taking down old unserviceable one complete all as specified and as directed.

Dismantling the existing staging of the hot/cold water tank, collector plate of any capacity and type from the PCC foundation and material & labour for PCC 1:2:4 type B1 with (using 20mm graded stone aggregate) with 15mm thick rendering in CM 1:6 finished even and smooth with out using extra cement, grouting legs of staging, complete all as specified and as directed.

S & F in repair 15 mm PP-R Stop/ball valves, including fixing to pipeline as per site requirement, complete all as specified and as directed.

Supply & Fix in Repair PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked, 15mm bore complete assembly screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in replacement fully automatic star delta starter suitable for motor of capacity 5 HP including contactors, timers, relays etc. including connections with suitable size of copper wire, complete all as specified and as directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm, three core, incl taking down old unsv wiring of any size and type complete all as specified and as directed.

M/S GUPTA ENTERPRISES (BID ID -3137278)

GLIBS CONSTRUCTION (BID ID -3129024)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3124553)

a.k constructions (BID ID -3120334)