Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.7 L
Closing Date
30 Jun 2026, 3:00 pm
Similar tender results from the same govt authority in the past 3 years.
1)Construction of New Office Building at RPF Outpost Hinganghat along with 05- bedded RPF Barrack under the jurisdiction of ADEN(Warora) Sub-Division in Nagpur Division in PH-64 in PWP 2025-26. 2)Construction of New Office Building at RPF Outpost Pulgaon along with a 05-bedded RPF Barrack under the jurisdiction of ADEN(Wardha) Sub-Division in Nagpur Division in PH-64.
DRMWNGP-66-2026-01
DRMWNGP-66-2026-01
Open
12 Months
Nagpur, Maharashtra
₹0
₹3.7 L
8 Jun 2026
8 Jun 2026
16 Jun 2026
at RPF Out Post Pulgaon a/w 05 bedded RPF Barrack.
Item- 01 (Electrical Item)
S No. Item No Description of Item Unit Qty Rate Amount
1 01 Concealed wiring for light, fan & 6 Amps plug Point 220.00 716.46 157621.20
points with PVC Pipe and PVC insulated
copper conductor 1.5 sq.mm. size with
modular board with supply of all materials.
2 02 Concealed Wiring for 6/16 Amps plug points Point 25.00 743.43 18585.75
with PVC Pipe and PVC insulated copper
conductor 2.5 sq. mm. size with modular
board supply of all materials. (S&E)
3 03 Wiring for submain along with earth wire with Metre 800.00 111.00 88800.00
the size 2X2.5 sq.mm+1X2.5 sq.mm earth
wire of PVC insulated copper conductor,
single core cable in
concealed/surface/recessed PVC heavy
gauge conduit as required. The work shall be
done as per CPWD Pt. I, manual(1972) for
general specification of electrical work. All
materials should be IS marked. (S&E)
4 04 Wiring for submain along with earth wire with Metre 1200.00 131.00 157200.00
the size 2X4 sq.mm+1X4 sq.mm earth wire
of PVC insulated copper conductor, single
core cable in concealed/surface/recessed
PVC heavy gauge conduit as required. The
work shall be done as per CPWD Pt. I,
manual(1972) for general specification of
electrical work. All materials should be IS
5 05 Wiring for submain along with earth wire with Metre 200.00 179.00 35800.00
the size 2X6 sq.mm+1X6 sq.mm earth wire
of PVC insulated copper conductor, single
core cable in concealed/surface/recessed
PVC heavy gauge conduit as required. The
work shall be done as per CPWD Pt. I,
manual(1972) for general specification of
electrical work. All materials should be IS
surface/recces LED fitting complete with
necessary fixing arrangements as per site
requirement. (S&E)
7 07 SETC of Indoor 20 watt box type industrial Numbers 55.00 503.98 27718.90
LED tube complete with associated
accessories. (S&E)
8 08 Supplying & erecting LED concealed type Numbers 5.00 629.64 3148.20
foot / step light with aluminium body for
indoor application suitable for upto 5 W LED
including driver and erecting by making
necessary arrangement/ recess in wall to
make it flush with surface. (S&E)
9 09 SETC of Energy Efficient, BLDC AC Ceiling Numbers 15.00 2917.17 43757.55
Fan,1200 mm Sweep, Voltage 170-
250v,Single Phase, Frequency 48-52Hz, Input
Power Not More Than 32W, Air Delivery 230
cmm, Speed 380 RPM, Speed Control,
Remote Handset, BEE 5 Star Rating With 5
Yrs. Warranty, Authorized OEM Certificate &
CPRI Test Certificate to be Submitted Along
With Supply complete. (S&E)
10 10 SETC of 12" metal body type exhaust fan Numbers 2.00 3283.54 6567.08
complete with motor guard, cover etc. (S&E)
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
11 11 SETC of Energy efficient BLDC Wall mounting Numbers 5.00 3348.80 16744.00
fan with 400 mm sweep of working voltage
90-245V, 50Hz, 1350 RPM, CMM:71 of
Wattage: 32 W, Motor winding should be
Copper, With double ball bearings, with
separate fan motor for oscillation, Wall
mounting fan Colour: White complete. (S&E)
12 12 SETC of Distribtuion box consisting with Numbers 2.00 2638.84 5277.68
Industrial Plug and socket 20Amp, 2P+E+DP
confirming to IEC 61439-3 suitable for flush
mounting and surface mounting and to be
supplied along with RCBO of rating
25A/20A/16Amps with 30 mA sensitivity
confirming to IS12640-2. for gyser. Make of
Industrial Plug, socket and RCBO shall be
Legrand , L&T, HAVELLS, INDO ASIAN, ,ABB ,
Schneider. (S&E)
13 13 SETC of surface mounted / flush type power Numbers 1.00 551.31 551.31
unit complete with modular plate 4M, 25A
MCB starter, plug & socket for AC as per IS &
IE rules and as per site requirement. (S&E)
14 14 Supply, erection, testing and commissioning Numbers 2.00 3041.87 6083.74
of 3 liter geyser with complete with
connection and necessary fixing
arrangements as per site requirement. (S&E)
15 15 SETC of Single phase DB capacity 40 Amp. Numbers 2.00 4504.80 9009.60
RCBO for incomer and various type SPMCB 6-
32 Amp (4x6A, 2x10A & 2x16A) for outgoing
8 Nos complete. (S&E)
16 16 SETC of Three phase Distribution Board Numbers 1.00 12301.95 12301.95
having 63 Amps 300 mA 4 pole RCBO-1 no
and SP MCB 6-32 Amps-8 Nos (4x6A,2x10A &
2x16A) on each phase as per requirement
complete. (S&E)
17 17 SETC of 4 core 16 sq. mm. LT XLPE insulated, Metre 500.00 174.45 87225.00
Armoured, PVC sheathed Alluminium
Conductor cable with aluminium lugs, glands
suitable nut bolt etc. (S&E)
18 18 SETC of 4 core 70 sq. mm. LT XLPE insulated, Metre 500.00 581.90 290950.00
Armoured, PVC sheathed Alluminium
Conductor cable with aluminium lugs, glands
suitable nut bolt etc. (S&E)
19 19 Provision of trench in all kind of normal Soil Metre 500.00 93.94 46970.00
to depth 40x100cm & filling the trench (After
laying cable) to bring the original condition.
20 20 Provision of trench in hard rock/soil/road Metre 200.00 204.82 40964.00
track crossing to depth 40x100cm & filling
the trench (After laying to bring the original
condition.(S&E)
21 21 Supply and laying of DWC pipe in the cable Metre 1000.00 135.02 135020.00
trenches/under track/along the poles/DP
structuers to be provided including all
connected Accesories under other sch
itemsDWC pipe of dia 63 mm . (S&E)
22 22 Provision of maintenance free earthing as per Numbers 12.00 15395.90 184750.80
RDSO specification no. RDSO/PE/ SPEC/
PS/0109- 008(REV'0') complete.(S&E)
23 23 Supply and laying of GI earthing strip, 25 x 4 Metre 60.00 73.96 4437.60
mm with PVC sleeve -The price shall cover for
supply and laying of G.I. earthing strip of 25
x4 mm size covered with black coloured PVC
sleeve of superior quality from earth pit to
control/distribution panel board. The earthing
strip when laid on wall shall be fixed by
means of suitable size of GI clamps and
NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
24 24 Supply and erection of Storage type Numbers 1.00 54132.63 54132.63
selfcontained water cooler 150 ltrs. capacity
with stainless steel body, cooling capacity
150 ltr/hr, suitable to operate on 230 volts 50
hz. AC power supply as per specification.
25 25 SETC of water purifier similar to Alfa make Numbers 1.00 7566.13 7566.13
APARLE+ water filter cum purifier flow rate 2
Ltrs/min. complete. (S&E)
octagonal pole hot dip galvanized with
130MM bottom A/F& 70 MM top A/F with 1
Meter long hot dip galvanized double arm
standard bracket including foundation as per
requirement complete. (S&E)
27 27 SETC of LED street Light Roadway fittings in Numbers 16.00 3796.85 60749.60
aluminium PDC housing, toughened glass
cover with IP66 protection, Wattage-45
watts,input voltage-240 volts ac, 50Hz.
Complete. (S&E)
28 28 SETC of LED flood light fitting 90 Watt with Numbers 4.00 9225.22 36900.88
wiring and fixing arrangements complete.
29 29 SETC of astronomical automatic street light Numbers 1.00 11151.30 11151.30
control panel out-door type CRCA sheet steal
powder coated capacity 6 KW single phase
consisting digital 24 Hr timer, 32 Amp TP
contactor 40 A SPN (DP) MCB, Auto/ Manual
switch with complete wiring suitable for
mounted on channel/ angle fixed at electrical
pole, protection - IP 32.with 100 AMP MCCB
for main supply complete. (S&E)
30 30 Supply, installation, testing, and Numbers 1.00 82501.00 82501.00
commissioning of 500 LPD Solar Water
Heating System along with all necessary civil
foundation and plumbing work complete.
Channel Nut bolt etc.) (S&E)
32 32 SETC of outdoor type LT Distribution Panel 16 Numbers 1.00 104421.29 104421.29
SWG CRCA steel sheet, suitable 200 Allu bus
cap consisting with FP MCCB 200A-3 Nos,
MCCB, 100 Amps-4 Nos with electronic KWH
meter 50A 2 Nos VA Meter LED indicator etc
complete with accessories, bracket and fixing
arrangement. (S&E)
88 mm, weighing not less than 170 gms 17.73.2 600 mm long towel rail with total length of Each 2 708.95 1417.9
of 88 mm, weighing not less than 190 gms. 17.75 Providing and fixing PTMT 15 mm Urinal Each 1 107.2 107.2 spreader size 95x69x100 mm with1/2" BSP 76 thread and shapes, weighing not less than 60 gms. Providing and fixing PTMT urinal cock of 17.76 approved quality and colour. 17.76.1 15 mm nominal bore, 80 mm long, 42 mm Each 1 175.4 175.4 77 high and 30mm wide with BSP female threads weighing not less than 48 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 78 18.7.6 50 mm nominal dia Pipes Metre 250 934.15 233537.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 79 18.8.1 15 mm nominal dia Pipes Metre 100 497.8 49780 80 18.8.2 20 mm nominal dia Pipes Metre 150 537.6 80640 81 18.8.3 25 mm nominal dia Pipes Metre 200 627.25 125450 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 82 18.17.1 25 mm nominal bore Each 2 622.4 1244.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY 18.48 Providing and placing on terrace (at all floor Per Litre 3000 11 33000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 83 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 4 125.6 502.4 84 not less than 88 gms 18.54.2 15 mm nominal bore, 122 mm long, Each 3 161.2 483.6 85 weighing not less than 99 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 2 118.5 237 86 not less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.2 15 mm nominal bore, 125 mm long foam Each 2 224.1 448.2 87 flow, weighing not less than 120 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 88 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 4 51.85 207.4 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.63 Providing and fixing PTMT angle stop cock 15 Each 2 156.9 313.8 89 mm nominal bore, weighing not less than 85 gms 18.64 Providing and fixing PTMT swivelling shower, Each 1 121.4 121.4
40 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 91 19.6.4 300 mm dia. R.C.C. pipe Metre 50 994.3 49715 19.33 Constructing soak pit 1.20x1.20x1.20 m filled Each 1 2890.1 2890.1 with brick bats including S.W. drain pipe 100 92 mm diameter and 1.20 m long complete as per standard design. 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 250 530.9 132725 93 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 195 634.45 123717.75 94 thickness of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 35 1505.25 52683.75 95 (weight not less than 12.50 kg/sqm) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of 21.8 approved quality as per architectural drawings and direction of Engineer-in-charge complete. 96 21.8.1 Upto 5mm depth and 5 mm width Metre 80 96.75 7740 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing Sqm 10 617.05 6170.5 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 97 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Grading roof for water proofing treatment 22.14 with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 10 8042.3 80423 98 sand : 4 graded stone aggregate 20 mm nominal size) Total 9843411.08 Schedule 02-PART-(1)(b): Construction of New Office Building at RPF Outpost Hinganghat along with Schedule 05-bedded RPF Barrack under the jurisdiction of ADEN (Warora) Sub-Division in Nagpur Division in PH-64 in PWP 2025-26. Item- 01 NS ITEM S No. Item No Description of Item Unit Qty Rate Amount
Providing and Fixing Soap dispensor with Numbers glass bottle (ACN-1135N) Total 2880.00 Schedule 03-PART-(1)(c): Construction of New Office Building at RPF Outpost Hinganghat along with Schedule 05-bedded RPF Barrack under the jurisdiction of ADEN (Warora) Sub-Division in Nagpur Division in PH-64 in PWP 2025-26. Item- 01 NS ITEM S No. Item No Description of Item Unit Qty Rate Amount NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY
Providing and Fixing Soap Dish Holder (ACN- Numbers 1131N) Total 813.45 Schedule 04-PART-(1)(d): Electrical work in connection with construction work of new office building
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
SplCondition.pdf
ATTACHMENT
PCECIR_207.PDF
ATTACHMENT
PCECircular208Mixdesignlimits.pdf
ATTACHMENT
66-2026-01Const.ofNewofficeBuildatRPFatHGTPLO.pdf.pdf
ATTACHMENT
Download all tender documents and submit your bid