Roof repair, boundary wall construction, and painting whitewashing work for House No. D-6 in the Municipal Corporation Residential Colony, Hariparvat Zone.

Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, labor and tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2)

12mm thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive. (c) 1 Cement : 4 Coarse sand. (Chapter No.13 Si.No.2)

Providing and laying cement concrete in 1:1.5:3 (1Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and curing complete, lncluding cost of form work. ln Foundation and floors.

Mild steel of iron in heavy size such as trusses built up gates record reck, roof work gates etc. brought to required form including drilling holes revitting are welding where neccesary, and also including supply of steel bolts , nuts wastage etc. and there fixing required for completion of the work. (Chapter No.10 Sr.No.2)

Red Sand stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including camping jointing in white cemnet mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching complete. (Chapter No.18 Si.No.1 New)

Supply and Fixing of Light Fitting Switch Board. (None Sheduled)

Finishing Wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.27 New)

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. (Chapter No.15 Si.No.5)

Providing and Laying Vitrified Tiles 500x500mm Size (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including 75mm thick base with concrte 1:4:8 complete as per E/I etc. all complete. (Chapter No.14 Sr.No.20)

Sub Total (A)