Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹3.8 L+₹15,693 (4.30%)Rejected-AOC 3838 2ND FLOOR SECTOR 46 C CHANDIGARH UT 160047 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160047 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹4.1 L+₹47,723 (13.1%)Rejected-AOC 546 14 JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹3.5 L
EMD Value
₹7,020
Closing Date
1 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR/ MAINTENANCE TO DESERT COOLERS, FANS AND OTHER MISC COOLING APPLIANCES AT MIL STN KALKA UNDER GE (I) JUTOGH
2023_MES_578710_1
GE/JUT-64 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KALKA
CLASS E CATEGORY b (i)
6 documents required · 6 mandatory
₹300
GE (I) JUTOGH
₹7,020
Yes
10 Mar 2023
2 Feb 2023
3 Mar 2023
2 Feb 2023
1 Mar 2023
15 Feb 2023
Amount
CEILING FAN
M&L for servicing of ceiling fans, any sweep/size at existing position from various locations after removing cable connection from ceiling rose, checking, tightening of down rod, opening of fan, greasing/oiling of bush/ bearing, re-assembling and fixing the same in position including replacement of minor part such as split pin, lock bolt, condensor clamp check nut and cable flexible from ceiling rose to fan and connection etc including testing for its smooth running complete all as specified and directed. Note: Spare parts will be paid separately under respective items as supply only.
Supply only following items suitable for ceiling fan :-
Ball bearing as per sample suitable for ceiling fan
Capacitor of 2.5 Mfd
Capacitor of 3.15 Mfd
Gun metal bush as per sample
M&L for rewinding of ceiling fan with appropriate gauge size super enameled copper wire including necessary insulation material after cleaning of stator for 1200/1400 mm sweep ceiling fans complete all as specified and directed.
Exhaust Fan
M&L for taking down of exhaust fans, any sweep/size at existing position from various location after removing cable connection from ceiling rose, checking, tightening of nuts, bolts, opening of fan, greasing/oiling of bearing, re-assembling and fixing the same in position including replacement of minor part such as split pin and cable flexible from ceiling rose to exhaust fan and connection etc including testing for its smooth running complete all as specified and directed. Note: Spare parts will be paid separately under respective items as supply only.
Supply only following items suitable for exhaust fan:-
Capacitor 4 Mfd, 230 Volt
Ball bearing as per sample suitable for exhaust fan
M&L for rewinding exhaust fan 300/400 mm sweep stator with super enameled copper wire of appropriate gauge including necessary insulation material complete varnishing and heating the new winding for proper insulation including cutting the existing winding wire from the stator and cleaning the slot complete all as specified and directed.
WATER COOLER
M&L for Servicing of water cooler of any make & type of capacity 40/80 by disconnecting electrically & mechanically, from various location for repair and maintenence including cleaning condenser coil and storage tank with chemical base solution and soda water and repalcement of unserviceable parts and refixing , re-connecting electrical and water connections, testing complete all as specified and directed. Note :- New components/parts shall be measured and paid separately under respective items as supply only.
Supply only following item suitable for water cooler:-
Starting capacitor 40-60 MFD
Starting relay (as per sample)
Running capacitor 10 MFD
Thermostate as per sample
S&F in replacement sealed unit compressor unit single phase, 230 V and for water cooler, welding/brazing of gas pipe line, vaccume/ pressure leakage testing etc,Supply and charging of refrigerant gas with non CFC of adequate quantity complete and testing incl taking down the old unserviceable sealed unit compessor, suitable for 40/80 Ltrs capacity complete all as specified and directed.
S&F in replacement of FHP motor single phase suitable for 40/80 ltrs capacity water cooler as per existing, complete all as specified and directed.
M&L for charging with refrigerant gas suitable for water cooler, checking and testing the leakage from the system of any capacity, complete all as specified and directed.
REFRIGERATOR
M&L for servicing of refrigerator of any make and capacity from various location for maintenance including taking out old unserviceable parts and replacing with new parts and re-install the same at existing place after repairing, servicing and testing complete all as specified and directed. Note :-Spare parts shall be measured and paid separately as supply only.
Supply only following items suitable for refrigerator :-
Thermostate (as per sample)
Thermostate switch as per sample
Relay as per existing.
S&F in replacement new sealed unit compressor capacity of 265/300/310 ltr in replacement, welding the same with existing refrigerant pipe, leakage testing/vaccum test, supply & charging of refrigerant gas of adequate quantity testing complete incl taking down the old unserviceable sealed unit compressor from refrigerator and complete all as specified and directed.
M&L for charging with refrigerant gas suiatble for refrigerator, checking and testing the leakage from the system of any capacity complete all as specified and directed.
DEEP FREEZER
M&L for servicing of deep freezer of capacity 262 to 425 ltr from various location , cleaning the complete condenser coil & storage tank with chemical base solution and soda water complete restoring electrical connection and testing complete all as specified and directed. Note :- Parts to be replaced shall be measured and paid separately under respective items as supply only.
Supply only following item suitable for deep freezer :-
Starting capacitor 80/100 MFD
Running capacitor 30 MFD
Starting relay as per existing
S&F in replacement of sealed unit compressor hermatically company sealed suitable for deep freezer of capacity 315 to 425 Ltr, single phase, 230 V and welding/ brazing of gas pipe line, vaccume pressure leakage testing etc including charging of adequate quantity of regrigerant gas , welding/brazing of copper pipe & testing complete all as specified and directed.
M&L for charging with refrigerant gas suiatble for deep freezer, checking and testing the leakage with the help of nitrogen gas and repairing the same by brazing etc complete all as specified and directed.
DESERT COOLER
M&L for Servicing of desert coolers of any size/any height by taking down from the existing position,cleaning of bottom tank, side panel etc including repair/replacing unserviceable parts complete all as specified and directed. Note:-Spares parts required shall be measured and paid separatley under respective items as supply only.
Supply only the following items suitable for desert cooler :-
Capacitor 4 MFD
PVC Pipe transparent heavy duty ½ inch dia set for three side of desert cooler complete all as specified and directed.
Honeycomb cooling pad as per existing size/ sample suitable for desert cooler complete all as specified and directed.
Submersible water lifting pump suitable for desert cooler 220/230 V single phase complete all as specified and directed.
Fan motor for18'' sweep, 230V AC 50Hz (heavy duty) copper wound with blade complete all as specified and directed.
S&F in repairs Plug top 5 Amps, 230 Volts,50Hz complete all as specified and directed.
M&L for Desert cooler spray painting with one coat of synthetic enamel paint of approved quality and colour on internal & external surface including preparation of surface complete all as specified and directed.
M&L for PVC body of Desert cooler having nominal air flow capacity of 4000 Cum per hour (or nearest size) including fixing of Accessories from old body i.e. Fan Motor, Cooling Pad, PVC Pipe, submersible water lifting pump and connection of electric wire for dersert cooler complete and testing after assembeling all the assesories complete all as specified and directed. Note: Accessories from the old Desert cooler will be remove and fixed in the new body.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.
M&L for servicing of split/ window type AC 1.5 TR capacity from various location and any height for maintenance, opening cleaning with Magna/ Hibird solution, giving water air pressure, oiling etc. and refixing at existing place after repairing, servicing, testing etc. complete all as specified and directed.
M&L for charging with refrigerant gas suitable for split/ window type AC 1.5 TR capacity, checking and testing the leakage from the system and repairing the same by brezing etc., complete all as specifed and directed.
naina devi constructions
M/S kuldeep kumar khullar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .