SPECIAL REPAIR TO BLDG NO P-10/ (1,2,3,4) (OR MD ACCN) AT GRD COMPLEX GORAKHPUR MIL STN UNDER GE(AF)GORAKHPUR

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur

Name of Work: SPECIAL REPAIR TO BLDG NO P-10/ (1,2,3,4) (OR MD ACCN) AT GRD COMPLEX GORAKHPUR.

Contract No.: GE(AF)/GKP/E-105 OF 2025-26

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category

1 Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters complete all as specified as directed. Sqm Excess(+) Full Conversion INR

2 M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. Sqm Excess(+) Full Conversion INR

3 M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note: - 1 Supply only water proofing compound shall be measured and paid for separately. 2. Cost of scafolding for rendering is incuded in this item. 3. Rendering will be done in two layer 1st layer will be 10 mm thick and 2nd layer will be 5 mm thick. Sqm Excess(+) Full Conversion INR

4 M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed. Sqm Excess(+) Full Conversion INR

5 Supply only liquid water proofing compound ISI marked complete all as specified and directed. Ltr Excess(+) Full Conversion INR

6 M&L preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer with roller complete all as specified as directed. Sqm Excess(+) Full Conversion INR

7 M&L for providing and applyng minimum 1 mm thick JK/birla wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed. Sqm Excess(+) Full Conversion INR

8 M&L for preparation of newly plastered surface of wall/concrete surface and applying three coat of white wash on ceiling surface incl complete of surface all as specified and directed. Sqm Excess(+) Full Conversion INR

9 M&L for preparation old decorated surfaceof wall/concrete surface and of surface applying two coat of white wash on ceiling surface incl complete all as specified as directed. Sqm Excess(+) Full Conversion INR

10 M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying two coat of oil bound distemper white or tinted with roller complete all as specified and as directed. Sqm Excess(+) Full Conversion INR

11 M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of white cement primer omplete all as specified as directed. Sqm Excess(+) Full Conversion INR

12 M & L for Preparation of old decoreted surfaces of wall and applying two coat of cement base paint all complete as specified as directed. Sqm Excess(+) Full Conversion INR

13 Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness(below or above ground level) complete all as specified and directed. Cum Excess(+) Full Conversion INR

14 M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed. (Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.) Sqm Excess(+) Full Conversion INR

15 M&L 75mm thick PCC type D-2, (1:4:8) using 40 mm graded stone aggregate in Sub base, etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

16 M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Sqm Excess(+) Full Conversion INR

17 M & L for PCC 1:2:4 type B1 (Using 20 mm graded stone) as in coping and similar works incl necessary use and waste of from work complete all as specified and directed. Cum Excess(+) Full Conversion INR

18 M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate ) in surface chanel and drain complete all as specified and directed. Cum Excess(+) Full Conversion INR

19 Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified as directed. Cum Excess(+) Full Conversion INR

20 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified as directed. Cum Excess(+) Full Conversion INR

21 S&F steel water tubing `medium grade’ galvanized 15 mm bore with all medium grade fittings ISI marked and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down of old unservicable water tubing complete all as specified & directed. RM Excess(+) Full Conversion INR

22 S&F steel water tubing `medium grade’ galvanized 20 mm bore with all medium grade fittings ISI marked (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down old unservicable water tubing complete all as specified & directed. RM Excess(+) Full Conversion INR

23 S&F in repair 500 ltr capacity rotantional moulded triple layer polythylene water storage tanks white color (cylindrical vertical with closed top ) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed. Each Excess(+) Full Conversion INR

24 S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

25 S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed. Each Excess(+) Full Conversion INR

26 S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. Each Excess(+) Full Conversion INR

27 S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps ,including waste cupling,waste pipe , complete all as specified and directed. Each Excess(+) Full Conversion INR

28 S&F in repairs for 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed. Each Excess(+) Full Conversion INR

29 S&F in repair brass chromium plated concealed stop valve of 15 mm bore complete all as specified and directed. Each 0.000 Excess(+) Full Conversion INR

30 S&F in repair brass chromium plated angle stop cock, of 15 mm bore complete all as specified and directed. Each Excess(+) Full Conversion INR

31 S&Fin repair CP bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia. complete all as specified and directed. Each Excess(+) Full Conversion INR

32 S&F in repairs Grating doom 125 mm dia with waste hole complete all as specified as directed. Each Excess(+) Full Conversion INR

33 S&F in repairs Grating doom 100 mm dia with waste hole complete all as specified as directed. Each Excess(+) Full Conversion INR

34 S&Fin repair mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. Each Excess(+) Full Conversion INR

35 S&F in repair Stainless steel kitchen plate rack of size 600x900x250 of best quality ISI marked made out of 1.0 mm thick Stainless steel fixed with Nails complete all as specified and directed. Each Excess(+) Full Conversion INR

36 S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Each Excess(+) Full Conversion INR

37 S&F towel rail 450mm long of PTMT fixed with and including Chromium plated brassscrews and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. Each Excess(+) Full Conversion INR

38 S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grms including arm 15 mm size 195mm long with bend min wt 40 gms complete all as specified. Each Excess(+) Full Conversion INR

39 S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Each Excess(+) Full Conversion INR

40 S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed. Each Excess(+) Full Conversion INR

41 S& F in repair Soap dish, any type, fixed toplugs with chromium plated brass screws complete all as specified and directed. Each Excess(+) Full Conversion INR

42 S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed. Each Excess(+) Full Conversion INR

43 M&L 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as specified and directed. Each Excess(+) Full Conversion INR

44 S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed RM Excess(+) Full Conversion INR

45 S&F 75mm PVC (SWR) bends anyradius complete all as specified and directed. Each Excess(+) Full Conversion INR

46 S&F in repair PVC waste pipe 40mm dia for sink ISI marked complete all as specified and directed. Each Excess(+) Full Conversion INR

47 S&F in repair110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. RM Excess(+) Full Conversion INR

48 S&F 110mm PVC (SWR) bends any radius complete all as specified and directed. Each Excess(+) Full Conversion INR

49 S &F in repair 100 mm Cast iron spun cast soil, waste and vent pipes in any length with or without ears, with cement joints fixed in any position in wall/laid in trenches complete all as specified and directed. RM Excess(+) Full Conversion INR

50 S &F in repair 75 mm Cast iron spun soil, waste and vent pipes in any length with or without ears, with cement joints fixed in any position in wall/laid in trenches complete all as specified and directed. RM Excess(+) Full Conversion INR

51 S& F 100 mm cost iron Bends (any radius) with duck's foot or heel rest complete all as specified and directed. Each Excess(+) Full Conversion INR

52 S& F 75 mm cost iron Bends (any radius) with duck's foot or heel rest complete all as specified and directed. Each Excess(+) Full Conversion INR

53 S& F in 75 mm cost iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. Each Excess(+) Full Conversion INR

54 S& F in 100 mm cost iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. Each Excess(+) Full Conversion INR

55 Material and labour for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation:- (a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately). (b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformily complete all as specified & directed. (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer. (d) Over hot bitumen laying polymeric water proofing membrance conisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed. (e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm. Sqm Excess(+) Full Conversion INR

56 S&F 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe. RM Excess(+) Full Conversion INR

57 Material and labour PCC type E-2, 1:5:10, using 40mm graded aggregate for filling of sunken portion including demolition of existing material/Treatment, all as specified and directed by Engineer In Charge. Cum Excess(+) Full Conversion INR

58 Demolition of brick tiles flat or edges laid bedded and pointed in any type of mortar complete all as specified and directed. 10 sqm Excess(+) Full Conversion INR

59 Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all asspecified and directed. Cum Excess(+) Full Conversion INR

60 M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed. Sqm Excess(+) Full Conversion INR

61 M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately) Sqm Excess(+) Full Conversion INR

62 M&L for Water proofing treatment on "approachable / accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete (i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps. (iii) Applying two coats of bituminious based bitumen primer @ 0.3kg/sqm and spreading corse sand on primer to obatined rought sufrace which facililate make a bond between membrane and screed bed complete all as specified and as directed. Sqm Excess(+) Full Conversion INR

63 M&L for 300mm x 300mm x 7-9mm thick size roof cool tile to reduce room temperaature, slip resistance, ocean blue in colour laid in cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed. Make : Johnson or equibvalent of Ocean Blue Sqm Excess(+) Full Conversion INR

64 M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed. Cum Excess(+) Full Conversion INR

65 M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar all as specified. 10 Sqm Excess(+) Full Conversion INR

66 M&L machine cut kota stone slab flooring 20-25mm thick over 20mm thick (1:6) cement screed bad laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Sqm Excess(+) Full Conversion INR

67 Ditto but as in riser of steps, skirting, dado and pillar but prepolished kota stone laid over 15mm tick cement plaster in CM 1:4 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

68 S&F 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granitecomplete all as specified and directed. Sqm Excess(+) Full Conversion INR

69 M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. RM Excess(+) Full Conversion INR

70 Demolition of concrete of any description and in any position not other wise specifically provided for cement concrete reinforced including roof padding, Rcc Tank etc complete all as specified and directed. Cum Excess(+) Full Conversion INR

71 M&L for RCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work in bld upto 6M height incl use and waste of necessary formwork and scaffolding required complete all as specified and directed. Cum 0.000 Excess(+) Full Conversion INR

72 M&L for providing pre-cast RCC lintel ,shelves etc type B-1 ,1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4 for door and window opening including use and waste of form work complete all as specified and directed. CUM Excess(+) Full Conversion INR

73 M&L Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O complete all as specified and directed. Kg Excess(+) Full Conversion INR

74 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Sqm Excess(+) Full Conversion INR

75 S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

76 Ditto but as in skirting over 10 mm thick cement morter in (1:4) ….ditto as above Sqm Excess(+) Full Conversion INR

77 S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete. Sqm Excess(+) Full Conversion INR

78 S&F Glazed ceramic coloured tiles 450x350x7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick cement plaster in cm 1:4 complete all as specified as directed.. Sqm Excess(+) Full Conversion INR

79 Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) remooving from site complete all as specified as directed. Each Excess(+) Full Conversion INR

80 Taking down chowkats or frame exe 1.5sqm and n.exe 4 sqm with shutter (with out taking of shutter from frame) remooving from site complete all as specified as directed. Each Excess(+) Full Conversion INR

81 Taking down shutters of any description n exc 1 Sqm each complete all as specified as directed. Each Excess(+) Full Conversion INR

82 S&F factory made Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed. RM 0.000 Excess(+) Full Conversion INR

83 S&F factory made Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed. RM Excess(+) Full Conversion INR

84 M&L for PCC 1:3:6 type C1 as in hold fast blocksand filling in pressed steel frame and fasning of hold fast incl. Necessary form work Cum Excess(+) Full Conversion INR

85 S&F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated complete all as specified as directed. Sqm Excess(+) Full Conversion INR

86 S&F factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

87 S& F in repair Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lasmination & other side balancing white lamination in pelmet boxes,cup board shutters etc, rebated or flat edged fixed in repairs complete all as specified as directed. Sqm Excess(+) Full Conversion INR

88 S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing specified in SSR part-II 2020 complete all as speicifie and directed. RM Excess(+) Full Conversion INR

89 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg specified in SSR part-II 2020 complete all as speicifie and directed. Sqm Excess(+) Full Conversion INR

90 M & LProviding and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tomthe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area Up to 2 Sqm Sqm Excess(+) Full Conversion INR

91 Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of ardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area upto 1 Sqm Sqm Excess(+) Full Conversion INR

92 S&F 4.8 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square n. exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and as directed. Sqm Excess(+) Full Conversion INR

93 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples.complete all as specified and directed. Sqm Excess(+) Full Conversion INR

94 S&F 18 mm thick Rajshri PVC Celuka ply of grade1 quality (or equivalent PVC ply of other make as approved by GE) of both side prelem fixed with screws, solvent cement/adhesive to make cupboard shutter sides top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and dfirected. Sqm Excess(+) Full Conversion INR

95 M&L made PVC shelf/partition of required size consisting of panel of 18 mm thick Celuka PVC ply of make Rajshree (or equivalent PVC ply of other make as approved by GE) and supporting the shelf/partition and shall provide with PVC runners in thee sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf/partition to be edgelipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

96 S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter complete all as specified. Each Excess(+) Full Conversion INR

97 S&F stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified. Each Excess(+) Full Conversion INR

98 S&F 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified. Each Excess(+) Full Conversion INR

99 S&F in repair alumnium curtain rod (Dropery rod) plastic coated 20 mm dia including end Knobs fancy type nickle polished golden or silve colour as per sample.complete all as specified as directed. RM Excess(+) Full Conversion INR

100 S&F in repairs fancy type brackets for fixing of 20mm dia dropery rod complete all as specified and directed. Each pair Excess(+) Full Conversion INR

101 S&F in repairs Cloth rod with caps and brackets 15 mm dia complete all as specified and directed. Each Excess(+) Full Conversion INR

102 Dismantling wrought iron or mild steel work of any description not otherwise provided forwindows grill etc.complete all as specified. Kg Excess(+) Full Conversion INR

103 S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed. Kg Excess(+) Full Conversion INR

104 S&F 2nd class hardwood small fittings such as brackets of any type of door and window stopper including all necessary articlesn exc 200 cu. cm each each all specified. Each Excess(+) Full Conversion INR

105 M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. Sqm Excess(+) Full Conversion INR

106 M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as specified and directed Sqm Excess(+) Full Conversion INR

107 S&F 75 mm size butt hinges medium weight stainless steel complete all as specified and directed Each Excess(+) Full Conversion INR

108 S&F 100mm size butt hinges medium weight stainless steel complete all as specified and directed Each Excess(+) Full Conversion INR

109 S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR

110 S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR

111 S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

112 M&L for 150 mm size Aluminium handle cast type anodiesd complete all as specified as directed. Each Excess(+) Full Conversion INR

113 M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Sqm Excess(+) Full Conversion INR

114 M&L Providing ATT and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. RM Excess(+) Full Conversion INR

115 Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed. Per Point Excess(+) Full Conversion INR

116 M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of switch socket of thickness 1.6 mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash all as specified and as directed by Engineer- in- Charge. Per Point Excess(+) Full Conversion INR

117 Ditto as above but 5 Amp socket outlet, independent….ditto as above ….. Per Point Excess(+) Full Conversion INR

118 Ditto as above but on the same board…...ditto as above…... Per Point Excess(+) Full Conversion INR

119 Ditto as above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable. Per Point Excess(+) Full Conversion INR

120 Ditto as above but for one light point controlled by two, 2- way switch. Per Point Excess(+) Full Conversion INR

121 Ditto as above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly. Per Point Excess(+) Full Conversion INR

122 S&F switch piano flush type 5 Amp one way, single pole, 240 volts all as specified. Each Excess(+) Full Conversion INR

123 S&F switch piano type 5 Amp, 2 way, 240 volts all as specified. Each Excess(+) Full Conversion INR

124 S&F in repairs socket outlet 5 Amp, 5 Pin, 240 volt, flush type, all as specified and directed. Each Excess(+) Full Conversion INR

125 S&F in repairs bell push piano type, single pole 1 way 240 volt, all as specified. Each Excess(+) Full Conversion INR

126 S&F in repair call bell , ding dong / musical, single phase 230 volts, all as specified. Each Excess(+) Full Conversion INR

127 S&F in repairs switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, all as specified. Each Excess(+) Full Conversion INR

128 S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified Each Excess(+) Full Conversion INR

129 S&Fixing in replacement lamp holder bakelite with back plate suitable for batten fittings all as specified. Each Excess(+) Full Conversion INR

130 S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep. Make:- Anchor/SSK/Bajaj. Each Excess(+) Full Conversion INR

131 Supply and fixing in repairs LED bulk head light fitting 10 Watt complete all as directed by Engr-in-Charge. Make-HEXAT10LED857SSYMBOPC of Havells or equivalent. Each Excess(+) Full Conversion INR

132 Supply and fixing in repairs LED street light fitting 1 x 35/36 watt , water proof confirm to IP-65 including one number MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting. connecting with three core copper flexible wire 23/0.0076. Make -ENDURAPEALNEOSL48LED757PASYTOPC Of havells or equivalent. Each Excess(+) Full Conversion INR

133 Supply and fixing in repair LED lights fitting 1x 36W, 6500K, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells Cat No LHEXAPP7IN1W036 or equivalent in Bajaj/ Philips. Each Excess(+) Full Conversion INR

134 Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells Cat No LHEXAZP7PN1W010 or equivalent in Bajaj/Philips Each Excess(+) Full Conversion INR

135 Supply and fixing in repair of round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all specified and directed. Each Excess(+) Full Conversion INR

136 S&F in repair of rechargeable Emergency Inverter LED batten 20W, 3 feet delivering not less than 2000 lumens output, suitable for 230V ±10%, 50 Hz AC supply ,the fitting shall be equipped with inbuilt lithium-ion battery of minimum 2200 mAh capacity, capable of providing minimum 2 hours backup during power failure, with automatic changeover from mains to battery mode and vice versa. The system shall include protection against overcharging, deep discharge and short circuit complete all as specified and directed. Each Excess(+) Full Conversion INR

137 Supply and fixing in repair of LED Lamp 12W, 220V, AC complete all as specified and directed. Each Excess(+) Full Conversion INR

138 Supply ,install, testing & commissioning of indoor type, wall mounted (with anchor bolts & nuts) compartmentalized type Meter Cabinet for provision and fixing arrangements of 4 nos. energy meters of overall dimension 1200mm (W) x 750mm (H) x 200mm (D) made out of 2.0 mm thick CRCA Sheet with front door having cut out duly covered with transparent polycarbonate / glass panel for viewing KWh meter / Timer and other door shall be opaque. All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) after necessary surface treatment. The cabinet shall be fabricated as per the drawing and comprising of following accessories :- a) Four pole MCB, 63 Amps with breaking capacity 16 KA having fixed thermal and fixed magnetic release and spreader link at both incoming and outgoing side.- 01 No. b) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 6 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos. c) MCB SPN 25 Amps, 10 KA - 4 Nos ( To be connected with 4 Nos Meters) d) MCB SP 06 Amps, 10 KA -2 No ( For common lighting & Bldg Security Lights) e) Analog time switch 16 Amp-01 No f) LED indicating Lamps, 22mm with 3 Amps SP MCB-03 Nos. g) 3 Way Bakelite strip type cable connector 30 Amps rating - 06 Nos h) Dial type DIN rail mounting, Analog Time Switch 16 Amps / 230 Volts AC 50Hz, with battery back up, 24 Hrs programmable type with 1 NO & 1 NC output contact.- 01 No. (for security light). j) Internal wiring with 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :- i) MCCB to Bus Bar - 10.0 Sqmm copper ii) Bus Bar to Cable Connector via KWh meter and MCB - 6.0 Sqmm iii) Bus Bar to LED Lamp via MCB - 1.5 Sqmm Each Excess(+) Full Conversion INR

139 Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge. Each Excess(+) Full Conversion INR

140 Supply and fix in repair Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed. Each Excess(+) Full Conversion INR

141 Supply and Fixing in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA. Each Excess(+) Full Conversion INR

142 Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as directed. Each Excess(+) Full Conversion INR

143 Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed. RM Excess(+) Full Conversion INR

144 M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 6 sqmm including 6 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit all as specified. RM Excess(+) Full Conversion INR

145 M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 4 sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit all as specified. RM Excess(+) Full Conversion INR

146 Taking down existing Single phase energy meter of any type and make from existing position without disturbing other connection and deposit the same to AGE E/M store yard after noting down the reading from meter all as specified and directed and fixing the same after spl repair carried out in said body. Each Excess(+) Full Conversion INR

147 Supply and fix in repair Exhaust Fan 300 mm dia, metallic body ,Single Phase 230 Volts AC including lower shutter and all connection and including writing MES No complete all as specified and directed.Note(old U/S fan will be deposited to E/M store yard. Each Excess(+) Full Conversion INR

148 Supply and fix in repair exhaust fan made of plastic body complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed..Note(old U/S fan will be deposited to E/M store yard. Each Excess(+) Full Conversion INR

149 Taking down ceiling fan by unscrewing nut , bolts, disconnection of electric cable from ceiling rose, ceiling cable end, removing blades , of any sweep and make and deposit to MES AGE E/M Store all as specified and directed. Each Excess(+) Full Conversion INR

150 Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed. Each Excess(+) Full Conversion INR

151 M&L for replacing the conventional Ceiling fan rod with An anti-suicide fan rod of 260 mm and white in color with is a specially designed down rod used to hang a ceiling fan that incorporates a mechanism to prevent suicide by hanging.They typically work on Spring Mechanism having two parts, an upper and lower section, held together by a spring mechanism. Automatic Release, if a weight exceeding a certain threshold (typically around 20-25 kg) is applied to the fan (as would be the case in an attempt to hang), the rod's joint separates, and the spring expands. This expansion allows the fan and the applied load to descend safely, preventing the person from being fully suspended. The spring keeps the fan above the person's head, minimizing the risk of injury as they land on the ground. Benefits. The primary purpose is to deter and prevent suicide attempts by hanging from ceiling fans. They are designed to be safe for normal use, only activating when an abnormal load is applied, relatively easy installation and compatibility with most ceiling fan models including clamps and necessary related items all as per site requirement specified and directed by Engg-in-charge. with replacement of multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including making necessary electric connections & testing complete all as specified & directed. Make- Gold life or equivalent as approved by GE. (Note: This is only designed for to prevent suicide by hanging, safe for normal use, not for risk of injury.) NOTE : (i) Quoted rate is deemed to be inclusive of Anti-Suicide Fan rod and rubber reel & testing of serviceable rubber reel complete all as specified & as directed to the entire satisfaction of the Engr-In-Charge. Each Excess(+) Full Conversion INR

152 Supply and fix in repair water heater storage vertical type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement and wiriting CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge including dismantling of old water storage heater and depositing to MES AGE E/M store complete all as specified and directed. Each Excess(+) Full Conversion INR

153 S&F in repair of PVC connections 15mm size with PTMT nuts of length 600 mm suitable for hot water supply complete all as specified and directed. Each Excess(+) Full Conversion INR

154 M& L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information