DAY TO DAY PETTY REPAIRS TO SANITARY FITTINGS PLUMBING AND CARPENTARY WORK AT GRD UNDER GE AF STN GORAKHPUR

Amount

Repair/Maint duly attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, dressing table, pelmets, plate rack incl Aluminum doorsand Aluminium windows by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts,helical door spring,hydraulic door closer,Mortic luck, etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, ( Rates are deems to be including for screws,nails,bits etc)complete all as specified and directed by Engineer in Charge. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the joinery work functional shall be measured and paid for separately as Supply only under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. 3. In case of non attedence of complaints against above complaint by the contractor on the same day, a penalty of Rs 200/- per complaint per day will be recovered from the contractor due complete all as specified and as directed .

S & F in repair 6mm thick plywood, graded BWR, type BB fixed to timber framework of any thickness complete all as specified and directed.

Supply only 4mm thick plywood, graded BWR, type BB fixed to timber framework of any thickness complete all as specified and directed.

S & F in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1. mm including necessary beadings and fillets complete all as specified and directed.

S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete.

S& F in repair figured glass 4mm thick pin headed type in square n exc 0.50 Sqm, in square or reqd shapeeach pane including oil putty complete all as specified and directed.

Supply & fix in repair150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

S & F in repair 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

S & F in repair 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F in repair 250mm long mild steel sliding door bolts, bolt & clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S &F in repair 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S& F in repair butt hings med weight cold rolled MS, size 100 mm long complete all as specified and directed.

Above above but 75 mm long complete all as specified and directed.

S&F in repair brass 100mm size motrice lock, 4 levers ,vertical type complete all as specified and directed.

S & F in repair aluminium (extruded section) door closer hydraulically regulated designation no 3 universal type suitable for 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.

S & F in repair mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and directed.

S&F in repair curtain rod/rail with drapery rod plastic coating fancy type 25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.

S & F in repair two (double) legged floor door stopper of aluminium body and tongues anodess with hard drawer steel spring fixed in floor of 150mm complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames). complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified as directed.

M&L Second class hard wood plain, solid, chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.

S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S & F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

M&L for PCC 1:3:6 type C1 as in hold fast blocks and filling in pressed steel frame incl. Necessary form work

S/F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated.

S&F for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Flush shutters, 30mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified as directed.

S&F in repair Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lasmination & other side balancing white lamination in pelmet boxes,cup board shutters etc, rebated or flat edged complete all as specified as directed.

S&F in repairs Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lasmination & other side balancing white lamination in pelmet boxes,cup board shutters etc, rebated or flat edged complete all as specified as directed.

S&F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified as directed.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solven cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted ihn th MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solven cement, as per specification & drawing complete all as specified as directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-chargE.

S&F in repair 18 mm thick Rajshri PVC Celuka ply of grade1 quality (or equivalent PVC ply of other make as approved by GE) of both side prelem fixed with screws, solvent cement/adhesive to make cupboard shutter sides top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and dfirected.

S&F in repair made PVC shelf/partition of required size consisting of panel of 18 mm thick Celuka PVC ply of make Rajshree (or equivalent PVC ply of other make as approved by GE) and supporting the shelf/partition and shall provide with PVC runners in thee sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf/partition to be edgelipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed.

S&F in repair 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make- KAFF complete all as specified.

S&F in repair stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified.

S&F in repair CP SS wire basket (storage basket) pull out type for large utensils, size 380 to 610 mm with necessery fitting clips, telescopic channel etc complete all as specified.

S&F in repair CP SS wire basket (storage basket) pull out type for cup and soucer baskets, size 380 to 610 mm with necessery fitting clips, telescopic channel etc. complete all as specified.

S&F in repair CP SS wire basket (storage basket) pull out type for plates basket, size 380 to 610 mm with necessery fitting clips, telescopic channel etc. complete all as specified.

S&F in repair CP SS wire basket (storage basket) pull out type for cutlery basket, size 380 to 610 mm with necessery fitting clips, telescopic channel etc. complete all as specified.

S&F in repair CP SS teliscopic channel 18" long, zink (35Kg) make- Sleek (Asian paint) code-HICH- 1356) or equivlents. complete all as specified and directed.

S& F in repair for door cill brush complete all as specified and directed .

M&L Preparing old wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth.

Preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide of any description exc 10 cm width or girth.

S & F in rpair PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm Make - Prayag /Shakti or equivalent

S & F in repair sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified.

S & F in repair stainless steel steel plate rack of minimum size 970X770X230mm of standard quality, fixed to wall with wooden gutties and screws complete all as specified and directed.

S & F in repair Anodised Aluminium Snap Grid (size of grid 605x605mm) frame work for false ceiling & Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified.& 4mm thick non asbestos fibre cement building board fixed or laid/inserted to aluminium framed work complete all as specified and directed.all as specified

Repair/maint and Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, Health foucet,jet sprey,any type of mixer, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply, Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps incl attending the complaints of no water supply.repair to PVC bend, pipe etc .( Rates are deems to be including replacement washers (hot/cold) , flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle, etc) complete all as specified. Notes:-1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "Supply only" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. 3. In case of non attedence of complaints against above complaint by the contractor on the same day, a penalty of Rs 200/- per complaint per day will be recovered from the contractor due complete all as specified and as directed .

Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.

Supply & Fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.

S & F in repair flushing cistern kit" for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed.

S & F in repair 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore Stop valves, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

ditto as above but of 20mm bore complete all as specified and directed.

S & F in repair 15 mm bore Stop valves, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm Brass WHB CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply only 15 mm Brass WHB CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

ditto above but 40mm dia complete all as specified and directed.

S & F in repair Grating doom 125mm dia of PTMT (minimum wt 40grms) complete all as specified and directed.

S& F in repair 15mm PTMT Bib tap standard of any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair angle valves, 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms

S& F in repair 15mm Ball valves, high pressures of PTMT, withepoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed.

ditto above but size 20mm dia and Minimum wt (for 20mm -210gms) complete all as specified and directed.

S & F in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.

S & F in repair PVC seat cover for EWC of white colour complete all as specified and directed.Make-Parriware/Hindware

S& F in repair Jet, chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtrlong , fixed for flange with WC, complete all as specified and directed.

S & F in repair 15mm bore steel water tubing medium grade galvanisedfor fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.

S & F in repair 20mm bore steel water tubing medium grade galvanised for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe all as specified and directed.

S & F in repair 20 mm dia tubular towel rail brass cromium plated, D type, 60cm long between flanges including one pair of brackets all as specified and directed.

S&F in repair stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed .

S&F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F in repair CP bottle trap 32/40mm dia for WHB having minimum water seal 25 mm complete all as specified and as directed.

S & F in repair Two way Angle cock with wall flange of size 15 mm bore complete all as specified .

S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Ditto above but 600mm long complete all as specified and directed.

S & F in repair 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repair for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F in repair for 110mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F in repair for 110mm bore PVC (SWR) shoue provided with access door all as specified & directed .

S&F in repair PVC (SWR) P /S /gully trap 125/110 mm,setting and jointing with solventcement complete all as specified and directed.

S&F in repair for 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed at site.

S&F in repairs vitreous China squatting pan, "Orrissa" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding1 : 2 : 4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and directed at site.

S&F in repair 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps , waste but including brackets as in repair, complete all as specified and directed.

S& F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S & F in repair Health faucet with 1 meter long easy flex tube in chrome finish and wall hook with NRV( Back flow preventer)(JAQUAR Cat Part No-ALD-CHR-579)or equvalent complete all as specified and directed at site.

S & F in repair SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed at site.

S&F in repair Toilet paper holder MSCP complete all as spd.(Make- Jaquare) Cat No- AKB - 35751 or equivalent. complete all as specified and directed at site.

Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified & directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 1000 ltr capacity rotational mounded polythylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

Petty repair for attending the complaints to existing Steel gate , steel window /Rolling Shutters, Pressed steel frame, Rat tails spring, and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100 mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional,repair /screwing of CGI/Pre painted sheets (Welding rod welding machine, small fittings such as window handle, hinges ,Screws etc will be provided by the contractor) removing the steel window shutters from the frame and re-fixing after making serviceable complete in GRD and NCC area complete all as specified and directed by Engineer in Charge. Notes 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. Rate shall be quoted accordingly, keeping in mind above said provisions. 3. In case of non attedence of complaints against above complaint by the contractor on the same day, a penalty of Rs 200/- per complaint per day will be recovered from the contractor due complete all as specified and as directed .

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces up to three storey of building , with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M&L for rendering 15 mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even smooth without using extra cement including taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 5 mm thick cement mortar 1: 3 as in ceiling, finished fair and even smooth without using extra cement including taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in two layars of 10+5 mm in CM 1:4 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of dr fixit or equivalent in the ratio (1:4:7),(one part super latex,4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for external walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately) complete all as specified and directed at site.

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in CM 1:6 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7),(one part super latex, 4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately) complete all as specified and directed at site.

Supply only Pidi proof 101 LW(+) ISI Marked

Supply only Super latex 302 ISI Marked.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Disterper over a coat of primer complete all as specified and directed

M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint , white or tinted (colour & shade as approved by GE) , over one coat of primer up to three stories,complete all as specified and directed.

M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for providing and applyng minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed at site.

M&L Non skid joint less colour Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding complete all as specified and directed at site.

Ditto but as in skirting over 10 mm thick cement morter in 1:4 complete all as specified and directed at site.

S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or colour complete all as specified and directed at site.

S&F Glazed ceramic coloured tiles 300x450x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick rcement plaster in cm 1:4 complete all as specified as directed..

S&F double charge Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch laid over 15 mm thick screed bed in cm 1:6 etc complete. Make- kajaria

S&F double charge Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10 mm thick plaster in cm 1:4 etc complete. Make-Kajaria

S & F in repairs anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

S & F in repairs powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 1.5 mm thick, side & top track frame size 92 X 29.5 X 1.5 mm thick and shutter aluminium anodised 39 X 20 X 1.5 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed.

S&F aluminium chequered grill weight exc 2.5 kg and n.exc. 3.5 kg per sqm with all fittings & fixture complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) laid in panels as in plinth protection /flooring etc including making joints &finishing even & smooth with out using extra cement as directed all specified.

M&L for PCC 40 mm thick 1:2:4 type B-1(20mm graded stone agg)as in flooring finishing even & smooth with using extra cement etc complete all as specified as directed.

S&F in repairs Acrylic sheet for windows panes and fix with oil putty/silicon/etc.complete all as directed.

S&F in repairs Ocean wall mixer (Make ; CERA Cat Part No F-3001404) with adjustable wall flange, for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1050 mm X 460 mm and bowl size 410X330X160 mm complete all as directed . Make- Nirali or equivalent.

S&F in repairs stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm all as specified and directed. Make- Nirali or equivalent.

S & F 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

S & F 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F 250mm long mild steel sliding door bolts, bolt & clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S & F butt hings med weight cold rolled MS, size 100 mm long complete all as specified and directed.

Above above but 75 mm long complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples.complete all as specified and directed.

Taking down Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S& F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in direction of Engr - in- charge.

S& F PVC Frame and 5mm thick plain colour PVC sheet in strips& channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid pvc partions inclusive of solvent cement and fixing at site as per specification and drawing in direction of Engr - in- charge.

S& F in repair high quality mirror size ( 24*36) inch with touch sensor switch shadow less view energy efficient LED with lighting code SKU: LED,FG,LED,23W,2430.

M& L preparation of old plastered surface of finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Dismantling MS grills/guard bars from window frames/varandah railing and from gate complete all as specified and directed.

S & F roof trusses (framed) trusses, purlin, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat section including distance pieces and cleat etc (cut to ordinary lengths) complete all as specified and directed.

M&L preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges etc , fixed with self tapping screws as specified

Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 250 and n exc 500 ltr capacity complete all as specified and directed.

M&L Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exc 500 and n exc1000 ltr capacity complete all as specified and directed.

M/s Vivek Traders (BID ID -3313737)

M/S GUPTA TRADERS (BID ID -3313741)

M/S DEEKSHA CONSTRUCTION (BID ID -3312273)

M/S RAJ CONSTRUCTIONS (BID ID -3314181)

M/ s J S Kapoor And Sons (BID ID -3313580)

H R ENGINEERS (BID ID -3312777)