COMPREHENSIVE REPAIR OF B/R WORKS TO OTM/ MD ACCN AT CQA(V) AND DAD COMPLEX UNDER GE(S) AHMEDNAGAR

Amount

Taking down cement or cement lime plaster of any description on brick work or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete and removing debris all as specified and as directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces (on external walls), finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick/concrete surfaces, finish even & smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces on ceiling, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint in matt finish of make," Weather coat in Berger/Apex in Asian/Excel in Nerolac/ Weather shield in ICI" complete over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated walls including brooming down or by steel wire brushes, scrapping down smoke spot mould & efflorescent salt & greasy spots etc. and applying three coats of white wash complete all as specified and as directed.

All as per item serial No 10 here-in-before but on ceilings.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted surfaces of iron/CI pipes of any description exceeding 10cm in width or girth and applying one coat of black bituminous paint complete all as specified and as directed.

M&L for applying 2 mm thick (average) wall care putty on new or old decorated surfaces to achieve smooth finish complete all as specified and as directed

M&L for preparation of old decorated wall surfaces and applying two coats of exterior emulsion paint in matt finish of complete all as specified and as directed. Note:- The rates quoted shall deemed to be included for the work upto tripple storey buildings including scaffolding and safety precautions etc. complete.

Demoltion of cement concrete (unreinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for glazed coloured ceramic tiles of size 300 mm x 200 mm x 7mm / 450 mm x 300 mm x 7mm thick on vertical surfaces such as dado/skirting, laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Coloure and design as approved by Engr-in-charge.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Coloure and design as approved by Engr-in-charge.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Coloure and design as approved by Engr-in-charge.

All as per serial item No.25 here in before but as in skirting laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for non skid coloured ceramic coloured tiles, 7-8mm thick (square or rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm (600 mm x 600 mm) as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed.

All as per serial item No.27 here in before but as in skirting laid over and including 10 mm thick backing coat in cemrnt mortar 1:3 complete all as specified and as directed.

M&L for 8-9mm thick virified tiles, double charged, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. Note: Coloure and design as approved by Engr-in-charge.

All as per serial item No 29 here in before but as in skirting laid over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Dismantling of stone slabs and stone tiles or interlocking tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and as directed.

M&L for 20-25 mm thick machine cut cudappah stone slab, laid over and including 20 mm thick bedding layer cement mortar 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone flooring, (size of kota stone slab 22" x 22") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No 33 here in before but as in risers to steps and staircase, skirting etc over and including 10mm thick backing coat cement mortar 1:3 all as specified and as directed.

M&L for 20mm thick granite (of any type & color) table rubbed and polished as in steps, jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed. Note: Coloure and design as approved by Engr-in-charge.

M&L for 100 mm thick PCC 1:4:8 type B2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed.

M&L for 60 mm thick precast cement concrete interlocking tiles (glossy finish/ rubber mat finish), hydraulically pressed cemented tiles of grey colour with pigments, factory made, M-35 grade as in floor, laid over and including 25 mm thick sand cushion and including filling of interstices with fine sand complete all as specified and as directed. (Note: Size, shape & pattern of tiles shall be as approved by GE)

Taking down chowkats or frames with shutters (without taking off shutters from the frames, area not exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames, area exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed.

Taking down shutter of any description, area exc 1 Sqm & not exc 2 Sqm each and refixing in the same opening after easing and adjusting etc complete all as specified and as directed.

Taking down shutter of any description, area not exc 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description, area not exc 1 Sqm but not exc 2 sqm each complete all as specified and as directed.

S&F mild steel window/ventilator with pressed steel frame made out of 1.25mm thick steel sheet having two rebate with glazed shutters and fly proofing shutters with side hung shutters including projecting type hinges with steel handle, and steel peg stay with and without glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, framed guard bars etc confirming to Fe 410-W Gde-E-250 quality-A with ends of bars shouldered and/or rivettd or forged into spikes and similar works including one shop coat of red oxide primer and fixed complete all as specified and as directed.

S&F framed work such as in doors or gates of angle (Fe 410-W Gde-E-250 quality-A) or tie bars, hold fasts other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including one shop coat of zink chromate primer paint complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications & drawing all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawing all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour feathered edges PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable for feathered edges PVC sheet, and jointed together with solvent cement, suppling and fixing in the frame at site as per specifications & drawing all as specified and as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges wood grain printed PVC sheet used instead of plain colour PVC sheet & 5 mm thick x15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mmx 10 (90 degree) used instead of exposed portion of PVC sheet beading suppling and fixing in the frame at site as per specification & drawing all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on the front face & 2mm prelam PVC sheet on back face , supplying & fixing to frame at site as per specifications & drawing all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangements complete all as specified and as directed.

S&F first class soft wooden beads, straight (any size ) for gauged joinery including mitres and removing old beads after tightening & nailing of wire mesh including two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

S&F 30 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and as directed.

S&F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and as directed.

S&F 35 mm thick second class hard wood, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specifed in SSR Part 1, section 8, clause 8.24(a); supplied and fitted to chowkhats all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Hacking out of old broken glass (any thickness, size quality or description and from any height) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane of any description complete all as specified and as directed.

S&F 3mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

M&L for welding work in repairs n. exc 2.5cm in length to n.exc 6mm thick of metal surfaces complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed with screws complete all as specified and as directed.

S&F 100 mm long stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and as directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and as directed.

S&F aluminum handle, cast type, anodized, 125mm size complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F in repairs, 40 mm dia cupboard knobs fixed with nails, screw and washer of mild steel brass polished, bright finished complete all as specified and as directed

S&F in repairs, door stopper of aluminiam alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm all as specified and as directed.

S&F in repairs, magnate catches, brass body and striking plate including lettering and fixed with cupboard shutter complete all as specified and as directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and as directed.

M&L for 15mm dia UPVC pipes, pressure rating 10 kgf/cm2, laid in floors / trenches/fixed to walls including fittings (Elbow, Tee, FTA, Socket, reducer, solvent etc) complete all as specified and as directed.

M&L for 20 mm dia UPVC pipes, pressure rating 10 kgf/sqcm, laid in floors / trenches/fixed to walls including fittings (Elbow, Tee, FTA, Socket, reducer, solvent etc) complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth all as specified and as directed.

S&F in repairs, 15mm bore stop valve, angle valve of cast copper alloy, fancy type , chromium plated, long body (concealed type) high pressure screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 15mm bore stop valve, angle valve of cast copper alloy, fancy type chromium plated, long body high pressure screwed for iron pipe complete all as specified and as directed.

S&F in repairs, brass chromium plated towel ring with bracket fixed wirh brass chromium plated screws complete all as specified and as directed.

S&F in repairs, 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spd and as directed.

S&F in repairs, 15mm bore brass chromium plated center hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, chromium plated Jet with flexible tube upto 1 metre long with stainless steel triangular plate fixed to european type water closet complete all as specified and as directed.

S&F in repairs, brass, chromium plated, health faucet, 15 mm bore of pipe including flexible connection pipe, complete all as specified and as directed.

S&F in repairs, soap dish, brass chromium plated, approximate size 160 mm x 100 mm x 90 mm, fixed to plugs with chromium plated brass screws & gutties, complete all as specified and as directed.

S&F in repairs, grating doom, 100 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs, PVC connection, 15 mm size with PTMT nuts, 600 mm long, complete all as specified and as directed.

S&F in repairs, brass chromium plated swivel shower rose, 125mm size, including shower arm, fixed to steel pipe and union complete all as specified and as directed.

S&F in repairs. 15mm dia, bib taps, fancy type, long body, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F in repairs, two in one bib tap, chromium plated, cast copper alloy for fixing of Jet /hand faucet/health faucet including flange complete all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 mm X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet (Pedestal pattern) white (excluding flushing cistern and flush pipe ) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

S&F in repairs, vitreous china wash down water closet, one piece/ curatore cascade with cistern set and soft close glossy (white) seat cover complete all as specified and as directed. Make:Cera/Hinware/Jaquar/Parryware.or eqivalent

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including chromium plated coupling complete all as specified and as directed.

S&F in repairs, 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve and handle including brackets complete all as specified and as directed.

S&F in repairs for prefabricated stainless steel plate rack of size 900 x 600mmx 300mm made out of 1 mm thick stainless steel plate jointed with brass screws complete all as specified and as directed.

S&F in repairs PVC cabinet mirror size 600 mm x 450 mm as approved by GE all as specified and as directed

M&L for cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud etc from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve refixed or provide new as applicable as etc complete all as specified and as directed.

M&L for cleaning of service tank upto 1000 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve refixed or provide new as applicable as etc complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and as directed.

All as per serial item No 101 here in before but 1000 ltrs all as directed.

S&F in repairs, PTMT corner shelf in 3 tiers with chromium plated guard brackets fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repairs, PTMT shelf assembly with CP guard brackets and CP railings fixed with CP brass screws complete all as spd and directed.

S&F in repairs, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs, drapery rod, fancy type, made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,with decorative type hard plastic finial as end holders with 02 Nos MS brackets fixed with stainless steel screws or rawl plug complete all as specified and as directed.

S&F in repairs, harrison curtain rails, 20 mm dia, mild steel, chromium plated, with fixing brackets, stops, rollers etc., complete all as specified and as directed.

M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests / pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed. Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

All as per serial item No 108 here-in-before but floor area of WC/bath-room/toilet exceeding 1.5 Sqm but not exceeding 3.0 Sqm.

S&F in repairs, vitreous chaina wash basin, white, angle back, size ,600mm x 480mm, excluding taps, waste pipe, chain plug and porcelain stopper but including pillar taps, 15mm bore dia, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, brackets, waste couplings PTMT, 32 mm bore complete all as specified and as directed.

S&F in repairs PVC waste pipe 40mm dia bore plain of standard length suitable for urinal all as specified and as directed

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.

S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) junction of 110 mm bore single, (single Y) equal or unequal with all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) pipes single sockted any length with rubber ring joints ,complete all as specified and as directed

S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) junction of 75 mm bore single, (single Y) equal or unequal with all as specified and as directed

S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

S&F pressed steel doors frames of size 105 mm x 60 mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

Taking down old steel windows/ventilators of any size and type complete all as specified and as directed.

Dismantling of PGI /translucent sheets of any guage or any thickness/size all as specified and as directed.

Dismantling asbestos cement (corrugated, Semi-corrugated etc.) sheets in roof coverings including ridges all as specified and as directed. .

M&L for gypsum board 8mm thick for insulation and accoustic purposes, 60 cm x 60 cm in size, fixed with staples on and including snap grid Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with and including Gl hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.including necessary fixing/ repair /replacement of existing electrical fittings at site including dismantling existing false ceiling with framework, boards, hangers etc complete all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, wall cladding, fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and as directed.

All as per serial item No 128 but except Asbesos cement sheets. Note : Serviceable Asbestos sheets obtained from dismantling shall be re-used.

S&F in repairs, solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet including fixing with solvent cement and fixing at site on PVC frame of PVC wall lining all as specified and as directed.

S&F in repairs, PVC wall lining consisting of 8 to 10mm thick wood grain printed hollow PVC sheet including fixing with solvent cement and fixing at site on PVC frame of PVC wall lining all as specified and as directed.

S&F in repairs, 5mm thick PVC sheet fillet of width 35mm for wall panelling including fixing with solvent cement on to wall to make PVC frame complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 25mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) incl taking down old shutters.

Supply, fabrication and fixing of kitchen cabinet / Cupboard back sides, partition and shelves made out of 18 mm thick solid plastic wood board plaint fitted with necessary arrangement fixed with screws / adhesives complete all approved by GE and as specified and directed by Engr-in-Charge.

Supply, fabrication and fixing of kitchen cabinet / Cupboard back sides, partition and shelves made out of 18 mm thick solid plastic wood board plaint fitted with necessary arrangement fixed with screws / adhesives complete all approved by GE and as specified and directed by Engr-in-Charge.

M.H Construction

Arihant Construction

DHANANJAY BABAN KALANE

AZAD SERVICES

M/S. AMERHAMZA GULAB SHAIKH