Construction of R.W Section-II, Office at Rajnagar for the year2025-26

Filling in foundation and plinth with excavated materials including cost of labour T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Earthwork in hard soil in excavation of foundation with initial lead & lift including roughdressing and levelling the the beds , cost of all T&P labour etc.complete.

Filling foundation and plinth with sand well watered and rammed including cost, conveyance ,royalty of all materials labour, T&P, etc. complete.

C.C.( 1:3:6 ) using 40 mm size H.G. metal well rammed with cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete.

Fly Ash brick masonary in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 9"/10" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalties, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete.

Fly-Ash brick (250 mm x 120 mm x 80 mm) masonry work having crushing strength between 75 kg/cm2 in cement mortar (1:6 ) in brick work

Cement concrete M-30 grade with 20mm down graded size C.B.H.G. chips for R.C.C. works including hoisting and laying per 1 cum. Column Base

Column

Plinth Beam

Lintel

R.C.C. Beam

Roof slab

Window Sill & Shelves

Chajja

Cutting, bending, binding and tying the grills and placing in position including cost of binding wires and HYSD reinforcing bars .

20mm thick gradding cement plaster in CM (1:4) over roof slab.

Supplying, fitting and fixing of Angle iron Door frame , Window frame, Window frame with grill using A.L size of ( 40 x40 x 5 ) mm M.S flats (25 x 5 ) mm including cost ,conveyance etc including cost of all materials & labour .

Providing and fising ISI marked 35 mm thick flush door shutters conforming to 15 2202 (Part 1) decorative typs, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains of cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures et complete

Supplying. fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Supplying and fixing of roller Blinds by fixing powder coated top channel, bottom channel with bottom end gap,control unit and good quality of 0.60 mm thick fabric of approved design and quality etc complete.

16mm. Cement Plaster in C.M. (1:6) over Brick work including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C.

12mm. Thick Cement Plaster in C.M. (1:6) including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C.

Fixing Tiles in floors treads or steps and landing on 25mm thick bed of cement mortar ( 1:1 ) jointed with neat cement slury mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing Tiles in Dados skirting and rises of steps on 12mm thick cement plaster ( 1:3 ) jointed with neat cement slury mixed with pigments to match the shade of the tiles including rubbing and polishing complete .

Finishing Plasters surfaces of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, charges with cost of all materials taxes, labour T&P etc., complete.

Providing fitting and fixing of false ceilling with Aluminium T Section No.3215 with 2'-0" center to center, L section No.1705 upto 15 Micron on 4 walls to be fixed by means of steel screw and PVc plugh and the Aluminium grid 2'-0" x 2'-0" suspended from ceiling etc complete.

Distempering two coats to walls with distemper of approved shade on old work one coat to give an even shade including cost of distemper per 1 sqm.(Ref. P-99, item-22 of A/R- 06). Data 10 sqm

Finishing walls with weather coat of approved shade on new work two coats over a coat of primer to give an even shape including cost of cement paint.

Painting two coats with enamel paint of any approved shade including cost of paints etc. complete.

Earthwork in hard soil for excavation of foundation including dressing and levelling the bed and depositing the soil with initial lead of 50mt. and initial lift of 1.5mt.

Filling in foundation and plinth with sand watered and rammed including cost of all materials, labour, T & P, tranportaton, tax, royalty etc. complete and as per the direction of the E.I.C.

Cement concrete (1:3:6) with 40 mm size Hard granite chips including cost of all materials, labour, T & P, transportation, tax, royalty, etc. complete and as per the direction of the E.I.C.

Cement concrete M-30 grade with 20mm down graded size C.B.H.G. chips for R.C.C. works including hoisting and laying per 1 cum. Column Base

Plinth Beam

Column

Cutting, bending, binding and tying the grills and placing in position including cost of binding wires and HYSD reinforcing bars .

Fly Ash brick masonary in cement mortar (1:6) in superstructure using Fly Ash bricks of 9"/10" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use with watering, curing including cost, conveyance, royalties, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

16 mm thick cement plaster (1:6) for brick work or stone masonary including cost of all materials, labour, T & P, transportation, tax, royalty, etc. complete and as per the direction of the E.I.C.

12 mm thick cement plaster (1:6) for brick work or stone masonary including cost of all materials, labour, T & P, transportation, tax, royalty, etc. complete and as per the direction of the E.I.C.

Providing,fitting & fixing MS grill gate including all labour ,T&P and Cess….etc complet

Finishing walls with weather coat of approved shade on new work two coats over a coat of primer to give an even shape including cost of cement paint.

Clearing and grubbing road land including uprooting wild vegitation,grass,bushes,shrubs,saplings and trees of girth upto 300mm,removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per technical specification clause-201.

Earth work in excavation of foundation in hard soil with all leads and lift including rough dressing breaking clods and leveling bed and depositing the excavated materials away from the working area etc. complete as directed E.I.C.(Ref:- A/R-06, item-2(a), P-2)

Supplying filling in foundation and plinth with sand in layers not exceeding 22.5cm (9") thick including watering and ramming with cost conveyance, royalties, taxes of the materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (1 ½") size clean hard black H.G. metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6") thick to the required level ramming watering and curing etc. complete including cost ,conveyance, royalty, taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 grade cement or any other type as per Clause 1501.2.2, M30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of c