PROVISION OF DEFICIENT SERVANT QUARTERS FOR OFFICERS MD ACCN P-16 AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

Amount

BUILDING PORTION

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / disintegrated rock complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for providing 40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B0 complete all as specified and directed.

M & L for providing precast cement concrete block masonry with solid blocks, exc 10 cm in width, of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ disintegrated rock complete all as specified and directed.

Removing excavated material to a distance not exc. 50 m and depositing where directed complete all as specified and directed.

S & F mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for providing RCC (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for flat fair finished surfaces of concrete complete all as specified and directed.

M & L for providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for providing RCC design mix) M30 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for rendering 15 mm thick in two layers in cement mortar 1:3, 10 mm thick first layer and 5 mm thick outer layer mixed with WPC as per manufacturer's instructions on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Quoted rate shall be inclusive of cost of WPC.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces, priming with alkali resistant priming paint, applying 1 mm thick wall care putty wherever required and distempering with two coats of distemper oil emulsion, white or tinted, complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished even & smooth, without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M & L for providing hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub-floor, sub-base, floors etc complete all as specified and directed.

M & L for providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

S & F powder coated anodised aluminum frame for doors/ windows/ ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated aluminium shutters for window/ ventilators, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) complete all as specified and directed.

Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes of 25 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm dia flush pipe of polyethylene of low or high density or PVC and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S & F in repairs 2 in 1 health faucet with hook, chromium plated, with 1.5 m tube complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M & L for PVC (SWR) floor trap of 75 mm dia outlet, with grating including jointing with solvent cement, fixed in repairs, complete all as specified and directed.

S & F PVC (SWR) bends of 75 mm dia bore, any radius, complete all as specified and directed.

S & F PVC (SWR) vent cowl of 110 mm dia bore complete all as specified and directed.

S & F PVC (SWR) reducer, 110 mm bore complete all as specified and directed.

S & F wash basins, Vitreous China, flat back or angle back type, 550mm x 400mm size, including brackets and cutting for and pinning in ends of brackets or erecting stand and fixing of polyethylene of low or high density or PVC. 32 mm dia waste pipe complete all as specified and directed.

S & F brass, tubular towel rail, chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F stop valves, fancy type, cast copper alloy (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm dia bore complete all as specified and directed.

S & F PVC connections of size 15 mm, 450 mm long with check nuts at both ends complete all as specified and directed.

S & F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes of 15 mm dia bore complete all as specified and directed.

S & F bib tap, standard, of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/20mm- 125gms)

M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces in cement mortar 1:4 complete all as specified and directed.

M & L for providing glazed ceramic coloured tiles in vertical surface, 300 x 200 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 2nd class hard wood, 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F aluminium anodised, barrel tower bolts of extruded section and 200 mm length complete all as specified and directed.

S & F extruded aluminium alloy handles, 125 mm long, fabricated type, anodised complete all as specified and directed.

INTERNAL ELECTRIFICATION

M & L for point wiring complete with 1.5 Sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, pressed steel terminal boxes firmly fixed with pipe /wall including concealed GI sheet metal box (rust protected), 3mm thick laminated hylem sheet or plastic masonite laminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 1.5 sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for the following complete all as specified and directed.

One light point controlled by one switch

One ceiling/ exhaust fan point controlled by one switch

One switch socket combination 3 pin 5 Amp on same board with other switches

One switch socket combination 3 pin 5 Amp on independent board

M & L for point wiring complete with 2.5 Sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, pressed steel terminal boxes firmly fixed with pipe /wall including concealed GI sheet metal box (rust protected), 3mm thick laminated hylem sheet or plastic masonite laminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 2.5 sqmm 1100 volts grade single core PVC insulated FRLS unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for one 3 pin 15 Amps switch socket combination on independent board complete all as specified and directed.

S & F modular switch 1 way 6A, 1 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F modular switch 1 way 16A, 1 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F modular socket 6A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F modular socket 6/16A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F modular fan regulator, eletronic step type, 120 watt, 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs ceiling rose, 3 terminal, PVC polycarbonated isolating body, complete all as specified and directed.

S & F ceiling fans complete with all accessories, 90- 300 V, maximum 35 watt, 1200 mm sweep with min air delivery 210 CFM, BEE five star rated with brushless direct current (BLDC) motor, including connecting with 3 core flexible wire from ceiling fan to ceiling rose, marking of MES No complete all as specified and directed. Note: Contractor shall submit warranty/ guarantee cards to Engineer-in-Charge.

S & F LED tube light fitting 1 X 20 watt, 220V AC integrated integral sleek extruded polycarbonate LED channel with white acrylic cover alonwith LED batten, including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

S & F exhaust fan, 300 mm sweep single phase 230/240 volt AC supply 50 HZ, made of sturdy engineered plastic complete with louvers and shutters, fixed with suitable MS Bracket, nuts, bolts and fixing arrangement, including making/ resizing holes and PCC work as per site requirement complete all as specified and directed.

S & F sheet metal enclosure for MCB's (D.B), double door, SPN 4 way with IP-42 protection, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F MCB SPN 32 Amps, 'C' series, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F MCB SP 6 to 32 Amps, 'C' series, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

M & L for submain wiring with two runs of 4 sqmm single core multistranded PVC insulated unsheathed cable 1100 Volts with copper conductor and one run of 4 sqmm single core PVC insulated unsheathed cable 1100 Volts with copper conductor as continuous earth wire drawn through and including rigid PVC conduit of suitable dia concealed in wall/ceiling with all accessories such as tees, elbows, junction boxes, reducers etc as required, connecting to existing main switch board/ distribution board and testing on completion and making good disturbed surfaces and painting to match with existing surface complete all as specified and directed. Note: Two runs of 4 Sqmm cable, one run of 4 Sqmm earth wire and one run of PVC conduit shall be measured as unit run.

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground, earth pit not less than 2.25 m below ground level, with top edge of plate not less than 1.5 m below ground level, connected to 4mm dia GI earth wire by means of bolts, nuts, check nuts and washers of galvanised steel including neccessary earthwork and excavation in any strata, PCC earth chamber in PCC 1:3:6 type C1, 20 mm dia light grade GI pipe for protection of earth strip and GI wire, 15 mm dia light grade GI pipe with funnel for watering, RCC chamber cover etc all as per electrical plate No. 3 of SSR Part-I including connections with earth testing point complete all as specified and directed. Note: On testing after completion if the desired earth resistance is not obtained, earthing shall be redone at no extra cost.

Ramesh Enterprises