Extension of W/C of O/L RD 9648-L Kheri Disty (990 Rft) (Pipeline)

Amount

Works Details

Providing lowering, laying cutting (cut surface to be uniformly finished), joining with rubber rings marked with IS 5382 and testing of SPIGOT AND SOCKETTED RCC NP2 MARKED WITH IS 458-1988 and specials into unloading stacking handing re-handling etc. complete in all respects to the satisfaction to the Engineer-in-Charge as per HSR item no. 28.60 for 600 mm dia

Excavation for pipeline running under pressure in trenches and pits, in open area, where disposal of surplus earth is done alongwith the alignment including triming and dressing sides, levelling of beds of trenches of correct grade, joint holes, cutting trees and bushes, etc refilling consolidation and watering of refill in, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water diversion of traffic, night signal, fixing caution board, watching, fencing etc and outside the town in ordinary soil for 600 mm dia RCC NP2 pipe as per HSR item no. 6.8 (a)

First class brick work laid in cement sand mortar 1:5 in foundation and plinth side lining, Nakka & Culvert complete in all respect as per approved drawing & PWD specification and as per HSR item no. 11.3

Cement concrete 1:4:8 with brick ballast 40mm nominal size in foundation and plinth HSR item no. 10.36 (for nakka culvert etc.)

Cement plaster 10mm thick cement mortar in 1:4 fillet gola plastering of nakkas and culvert etc. complete in all respect as per approved drawing and PWD specification as per HSR item no. 15.5

Supply of RCC Panels size 30"x30" at site of work, as per approved drawing design and specification (N.S. item) (as per CADA)

Fixing of RCC panels size 30"x30" at site of work, as per approved drawing design and specification (N.S. item) ( as per CADA)

Supply of RCC Lids size 24" dia at site of work as per approved drawing design and specification (N.S. item) (as per CADA)

Providing fixing 24" CI Nakka complete in all respect as per current market rate as per CADA pattern and rate approved vide CE/CADA memo no. 2565/30-W dated 03.05.2016

Providing and fixing STEEL BAR EMBEDDED PLASTIC STEPS OF SIZE 263 mm X 165 mm of orange colour, confirming to specifications, in pump chambers, manholes, etc. having minimum 3mm thick polypropylene polymer confirming to IS 10910 encapsulated on 12mm dia ribbed steel bars per IS 1786 the rate include cost of setting the same to correct lines and levels dully embedded in 1:2:4 cement concrete including carriage, loading, unloading, stacking, handling, rehandling etc complete in all respects to the satisfaction of EIC, HSR item no. 29.28

MOHAN LAL

THE DHAND TANUJ CO OPERATIVE LANDC SOCIETY LTD

Naresh Kumar Contractor

NIHAL SINGH

Sunil Kumar Contractor VPO Kuleri