ADDITION/ALTERATION CUM SPECIAL REPAIR TO VARIOUS SHEDS AT COD CHHEOKI FOR 508 ABW AT CHHEOKI UNDER GE (W) PRAYAGRAJ.

Amount

Excavation in trenches ,n exc 1.5m wide and n. exc 1.5m in depth, for foundation etc, or for shaft, wells, cesspits, manhole,pier holes,etc n. exc 10 sqm on plan not exc 1.5m depth and getting out in soft /loose soil complete all as speicified and directed.

All as item no 1 above but exc 1.5m and not exc 3.0 m complete all as speicified and directed.

Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n;exc 25cm each in layer complete all as speicified and directed.

M&L for hard core of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as speicified and directed.

M&L for cement concrete in foundation filling and mass concrete type D2 1:4:8( 40mm graded crushed stone aggregate) complete all as speicified and directed.

All as item no 6 above but type B2 1:2:4 (40mm graded crushed stone aggregate) complete all as speicified and directed.

M&L for providing ,cement concrete type B1 1:2:4 ( 20mm graded crushed stone aggregate) in lintels, upto 1.5m clear span,cills,steps, seismic and other similar bands,plinth course, string course, lacing courses,parapet and railings upto 60cm height,copings, kneelers, apex stone, bed plates, kerbs, troughs, and the like including weatherin, slightly rounded or chamfered angles complete all as speicified and directed.

M&L for RCC M25 as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as speicified and directed.

M&L for RCC M25 as in slabs supported on walls beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes complete all as speicified and directed.

M&L for RCC M25 as in columns, pillers, piers posts and struts complete all as speicified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc,but excluding ashlar facing, dressed stonework and precast concrete articles complete all as speicified and directed.

M&L for fly ash brick work with sub class B' bricks, straight or curved on plan exc. 6m mean radious built in cement mortar 1:6 complete all as speicified and directed.

M&L for fly ash bricks sub class B' bricks,except bricks straight or curved on plan exc. 6m mean radious built in cement mortar 1:6 complete all as speicified and directed.

M&L for brick work with sub class B' bricks, straight or curved on plan to any radious in half brick thick built in cement mortar 1:4 complete all as speicified and directed.

Cutting chases, pinning in in brick walls .making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing,steps, cills,sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exc 10cm bur not exc 20cm girth complete all as speicified and directed.

Cutting holes in brick walls built in cement mortar 1:4 for inserting hold fasts not exc 150 sq.cm complete all as speicified and directed.

Cutting opening, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into doorss opening,etc or cutting out defective brick work for under pinning, including providing fixing and removing shoring, cleaning and stacking bricks complete all as speicified and directed.

Forming jambs,etc, to openings ,including cutting toothing and properly bonding into old work, also fasing,jointing and pointing to match the existing work complete in cement mortar 1:6 complete all as speicified and directed.

Cutting holes in brick walls buit in cement mortar or cement lime mortar exc half bricks but not exc one brick s(depth of embaded portion of hold fast or lugs measured from the face of the jambs into the wall complete all as speicified and directed.

Form work to sides of concrete foundation, footings ,bases of columns, raft and raft brams, sides and soffits of foundation and plinth beam, and similar work, vertical or to batter rough finished surface of concrete flat surface complete all as speicified and directed.

Form work to soffit of suspended slab such as roof slabs, floor slabs, landing and similar work not exc 200 mm thick rough finished flat surface complete all as speicified and directed.

Form work to sides and soffits of floor or roof beams, haunching,girders, bressummers,lintels,cantilever, shelves including supports,overhang etc. also splays between floors and beams etc flat surface complete all as speicified and directed.

Form work to sides of pillars, posts,struts, pieas, columns and stachions squire or rectangle rough finished surface complete all as speicified and directed.

Taking down wooden roof trusses, coupled rafters or trussed beams above 4m & upto 8m clear span complete all as speicified and directed.

S&F of mild steel work as in Frammed work such as grills, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes, framed gusrd bars, barred iron doors,ladders, framed balustars, walkways, railings, frame work ofwater tanks ans similar work conforming to FE 290 gde E-165 complete all as speicified and directed.

S&F of mils steel work as in bands, straps, supports or stays for rain water,ventilating pipe including bolts if required hooks ,heavy for larg gates hooks and pintles hinges large hasp and stapes,chains, hand made sliding bolts, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to waaod, truses, or rafters and similar smaal articles conforming to Fe 290 Gde E-165 complete all as speicified and directed.

S&F of mild steel TMT bars,10 mm dia and over, cut to length,bent to shape required, including cranking,bending spirally of hooping for columns, hooking ends and binding with and including mild steel wireannealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed.

S&F of mild steel TMT bars, above 6 to 8 mm dia cut to length,bent to shape required, including cranking,bending spirally of hooping for columns, hooking ends and binding with and including mild steel wire9annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed.

S&F of mild steel TMT bars, 8 mm dia and over upto and including 10mm dia stirrups, spacers and binders, cut to length,bent to shape required, including cranking,bending spirally of hooping for columns, hooking ends and binding with and including mild steel wire9annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed.

S&F of plates(plain or chequered) ,channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410w Gde 250 complete all as speicified and directed.

S&F of MS work as in roof trusses(framed), truses, purlins, crane gantries, rails, and fastenings and heavy bracket framing(beam,tee,angle,channel,ot flat section) includingdistance pieces, cleats etc conforming to Fe-410w Gde 250 complete all as speicified and directed.

M&L for cutting grooves upto 10mm x 10mm size to the craked portion/ wall, cleaning out, weting and grouting/ filling the craked portion completely with emulsion polymer with filler and aditive paste mastercrate M-81of chokesy chemicals/Nitobond AR of Fosroc/Crack Fill of Bostik sealing compound or other equivalent specified make as per manufacturers specification and drying the surface for 4 to 6 hours for laying of cement plaster complete all as speicified and directed. (Aditive paste/ sealing compound measured and paid seperately) .

Supply only readymade Aditive paste/ sealing compound or equivalent specified make complete all as speicified and directed.

M&L for applying two coat of Masterbond EP epoxy resin choksey chemical/Nitobond AR of Fosroc/fill-a-gap of Bostik all as per manufacture instructions, drying the surface for 6 to 7 hrs covering the column surface with welded mesh including bending/drilling/tying/welding/ bolting etc as necessary and rendering 25mm thick cement plaster in 1:3 cement mortar complete all as specified and directed (Welded mesh and epoxy resin to measured and paid separately)

Supply only readymade Masterbond EP epoxy resin/ choksey chemical/Nitobond AR of Fosroc/fill-a-gap of Bostik all as per manufacture instructions or equivalent specified make complete all as speicified and directed.

M&L for removing of all lime wash, raking out joints, pointing/ masonry work in wall, columns built in cement mortar scrubbing down with water and cutting bending tying of chicken wire mesh around the column and material and labour for plastering on other than fair surfaces 15 mm thick with cement mortar 1:4 (chicken wiremesh measured and paid seperately) complete all as speicified and directed.

S&F welded steel wire mesh 4 to 6mm dia and not exc 4Kg per sqm (cut to length bend to shape required including cranking bending and binding with mild steel wire 0.9mm dia annealed) complete all as speicified and directed.

Supply only woven mesh/ chicken mesh of 0.5 mm dia mesh square opening of not more than 10mmx10mm size complete all as specified and directed.

S&F of framed work as in doors or gates of angle or other section with gusset plates, rails,braces etc, complete drilled for fixing of steel sheeting or other covering,doors etc, to be prepsred for hanging or sliding with and including either hooks ang hinges or steel hanging door fitting Fe-410w Gde 250 complete all as speicified and directed.

S&F in repair of rolling shutters, 1.25 mm thickness of lath in mm with ball bearingwith gear operated as specified including top cover, anchoring rod hasp and staple and one shop coat of primer ercted in position as indicated, complete all as speicified and directed.

S&F of steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars dovetailed or welded complete all as speicified and directed.

S&F of anodised aluminium frame for doors,windows,ventilators with one or more rebates including jointing cleat for fixing etc complete all as speicified and directed.

S&F anodosed aluminium window and ventilator shutters, side hung type without sash bars,aluminium section, weighing 0.55 kg/m including necessary jointing cleat,glazing clips,rubber packing,snap beading,screws,aluminium fittings such as peg stays 150mm long(1 no),hinges type B-21 100mm long(02 no) suitable handle(1 no) complete all as speicified and directed.

S&F anodiswed aluminium door shutters, side hung type without sash bars,aluminium section, weighing 0.55 kg/m including necessary jointing cleat,glazing clips,rubber packing,snap beading,screws,aluminium fittings such as peg stays 150mm long(1 no),hinges type B-21 100mm long(02 no) suitable handle(1 no) complete all as speicified and directed.

S&F of anodised aluminium work for doors, windows, ventilators and partions(fixed portion) with extruded built up standard tubular section'appropriate Z section and other section of approved make conforming to IS: 733 and IS: 1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junction i.e at top, bottom, rubber/ neoprene gasket etc aluminium sections shall be smooth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/paneling CP brass/stainless steel, screws,complete all as per drawings , speicified and directed.

S&F of anodised aluminium grill anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws@ 200mm centre, including cutting the grill to prooper opening size for fixing and operation of hsndles and fixing approved anodised aluminium standfard section aroung the opening, complete all as speicified and directed.

S&F anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling and including hangers 6mm dia GI adjusting level fix to roof slab complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixwd or laid/insertaed to timber framework with screws complete all as speicified and directed.

S&F of 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washers in roof, wall etc complete all as speicified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, including and fixed with self tapping screws complete all as speicified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as speicified and directed.

S&F of 1mm thick plain , galvanized mild steel sheeting, in ridges, hips, valley gutters , drp and straight flashings( length and girth as fixed) with grade of zinc coating 275 complete all as speicified and directed.

Demolition of cement concrete (unreinforced) in groung floor and paving n exc. 15 cm thickness(beloe or above groung level) complete all as speicified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as speicified and directed.

Dismantling asbestos cement (corrugated,semi corrugated sheets etc, in roof covering complete all as speicified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position (un framed work) complete all as speicified and directed.

Dismantling unframed work timber scantling, as in fillets, rails, rafters, lurlins etc under 40 sqcm in section complete all as speicified and directed.

Taking down cement plaster on brick work or stone surface,hacking for key, raking out joints,scrubbing down with water etc complete all as speicified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as speicified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surface in cement mortar 1:3 finished even and smooth with out using extra cement complete all as speicified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth with out using extra cement complete all as speicified and directed.

M&L for preparation of new surface steel surface of any description,over 10 cm in width or girth,not otherwise described ,applying one coat of primer and two coat of synthetic enamel paint painting complete all as speicified and directed.

M&L for preparation of old surface steel surface of any description,over 10 cm in width or girth,not otherwise described ,applying one coat of synthetic enamel paint painting complete all as speicified and directed.

M&L for preparation of new wooden surface of any description,over 10 cm in width or girth,not otherwise described ,applying two coat of synthetic enamel paint painting over a coat of pink primer complete all as speicified and directed.

M&L for preparation of old wooden surface of any description,over 10 cm in width or girth,not otherwise described ,applying one coat of synthetic enamal paint complete all as speicified and directed.

M&L for preparation of new plastered surface on wall and applying three coat of white wash complete all as speicified and directed.

M&L for preparation of old plastered surface on wall and applying two coat of white wash complete all as speicified and directed.

M&L for preparation of old plastred surface of wall and aplying one coat of cement base paint complete all as specified and directed

S&F of door closer of aluminium extruded section hydraulically regulated, designation No 3, universal type,suitable for door shutters of 851 t0 1000mm in width and of weight between 61 to 80 kg hydrulic door clouser complete all as speicified and directed.

Hacking out old broken glass(any thickness) size,quality or description) wooden frame or stone,concrete, or brick surrounds,glazed with putty of fixed with beads any description complete all as speicified and directed.

S&F of rough cast wired,6.4mmthick and glazing glass exc 0.5 sqm and nexc 0.75sqm with oil putty complete all as speicified and directed.

S&F of sheet glass 5.5mm thick,ordinary quality and glazing with oil putty in square n exc 0.5m sqm in each pan complete all as speicified and directed.

M&L for prelaminated particle board12mm thick ,interior grade prelaminated both sidewith decorative choice laminate fixed with screw to timber frame work/aluminim partion work complete all as speicified and directed.

S&F of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 110 bore complete all as speicified and directed.

S&F of PVC (SWR) bends any radius110mm bore of pipe complete all as speicified and directed.

M&L for mild steel screw bolts( machine made) with hexagonal or square head at one end and screwd the other,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5cm and not exc 30mm long 16mm dia of neck complete all as speicified and directed.

M&L 4mm for sheet glass ordinery quality and glazing with oil putty , in squares not exc 0.5 sqm each pane complete all as speicified and directed.

M&l for cement concrete type B-1 1:2:4( 20mm graded crushed stone aggregate) 150mm thick as in flooring finished even and smooth without using extra cement complete all as speicified and directed.

M&L for preparation of surfaces of road, pavement ,floor and marking 2.5mm thick centre lines, stops lines,dashes, arrows, etc. and the like n exc 10cm wide on roads, pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine complete all as speicified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface and applying one coat of oil bound distemper complete all as speicified and directed.

S&F of 30 mm thich flush shutters ,solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as speicified and directed.

S&F of 300 mm mild steel sliding door boltsplate type,stove enamelled black,with brighyt bolt not less than 12mm dia with and including a minium of 6 bolts and nuts four on bolt plste and two on staple plate complete all as speicified and directed.

S&F of 150 mm mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as speicified and directed.

S&F of butt hinges midium weight, cold rolled mild steel of 100 mm size complete all as speicified and directed.

S&F of mild steel pressed handle 150 mm oval type, stove enamelled black complete all as speicified and directed.

S&F in repairs of vitrous china wash basin, white flat back type of size 550 mm x 400 mm including bracket,including cutting for and pinning in ends of bracket in cement mortar 1:3 including 32mm dia chromium plated waste coupling and waste pipe complete all as speicified and directed.

S&F in repairs pillar tap 15mm dia bore,cast copper alloy with capstan head,chromium plated,screwed down high pressure,with fly nuts screwed for iron pipe or for brass ferrule complete all as speicified and directed.

S&F PVC connection 15mm dia and 450mm long with brass nuts fixed complete all as speicified and directed.

S&F in repairs stop valves 15 mm ,cast copper alloy,fancy type chromium plated with long shank and cup screwed down high pressure, screwd both ends for iron pipe or for unions complete all as speicified and directed.

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F of PVC (SWR) bends any radius 75 mm bore complete all as speicified and directed.

S&F of PVC(SWR) branch pieces singleY equal or unequal 75mm bore complete all as speicified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as speicified and directed.

S&F tubing, medium grade, 15 mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed

S&F tubing, medium grade, 20 mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection finished the surface even & smooth without using extra cement & laid in panels including joints filled with bitumenous sand (1 : 2 ) complete all as specified and directed.

S&F 1000 liter capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top multilayer ISI marked) hoisted and fixed in position including ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed. (Note: float valve paid separately)

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handles,screwed down, screwed both ends for iron pipes or for unions, 15 mm dia of pipe complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 20 mm-210 gms) complete all as speicified and directed.

M&l for cement concrete Type B-1 1:2:4 ( 20mm graded stone aggregate) 100mm thick as in flooring finished even and smooth without using extra cement complete all as speicified and directed.

M&L for vitrified tiles dark shade 10 mm not exc 0.36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as speicified and directed.

BLANK

M&L for reinforced cement concrete type B 1, 1:2:4 using 20mm graded stone aggrete as in slab supported on walls, beams and columns, in floors, roofs, landing, balconies canopies, deck slabs, and in shelves and the likes complete all as speicified and directed.

BLANK

M & L for 100 mm bore salt glazed stoneware drain pipe grade ‘A’ conforming to IS 651-1972 laid in trenches and jointed in cement mortar 1:1 complete all as speicified and directed.

M & L for cement concrete aggregate bed to drain pipe 100 mm dia including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed.

Cutting into existing man holes for connecting new drains making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) surface smooth finished and reforming benching as required for internal dia of pipe 100 mm complete all as speicified and directed.

Surface dressing n exc 15 cm deep in soft / loose soil complete all as specified and directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:4 complete all as specified and directed

M&L Moorum/red bajri filling in floors or pavings, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40mm graded crushed stone aggregate) as in sub base, 100mm thick etc complete all as speicified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:6) etc complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm / 450 mm x 350 mm x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10 mm thick plaster in cement mortar 1:4 complete all as speicified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on ceiling finished even and smooth with using sagol finish complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet re-inforced with MS square tube suppling and fixing in opening complete all as speicified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with salvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site complete all as speicified and directed.

S & F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as speicified and directed.

S & F extruded aluminium alloy handles fabricated type anodized 125 mm size complete all as speicified and directed.

S & F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as speicified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 mm x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F Wash hand basin vitreous china (flat back) size 550 mm x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S&F 10 Liters capacity PVC flushing cistern white high level with inlet ball valve, float valve and nylon rope including brackets, flush pipe of polythene 32 mm dia of suitable length and making good the disturbed portion complete all as speicified and directed.

S&F bib taps 15 mm dia chromium platedcast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as speicified and directed.

M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as speicified and directed.

S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

S&F rotational moulded polythene water storage tank of 500 liters capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as speicified and directed.

S & F ball brass valves high pressure with polythene flot and flynut complete screwed for iron pipe or brass ferrul and fixed bore of pipe 20mm complete all as speicified and directed.

S&F in gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe for 20mm bore complete all as specified and directed.

M & L PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) 75 mm thick as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L applying two coats of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces complete all as speicified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe complete all as speicified and directed.

S&F Vitreous Chinal bowl urinal flat back, size of 465 mm x 355 mm x 265 mm white (minimum), with grating and union for discharge pipe complete all as speicified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as speicified and directed.

Taking down carefully existing truss/Base plate/bolts and placing, refixing in position after the column/walls are repaired including placing and fixing of Truss, base plate, welding/bolting etc complete to match the existing surface for laying of roof sheeting complete all as specified and directed.

M&L for forming 12 mm thick expansion joints followed with pre-formed bituminous feller and top 30 mm primed and sealed with sealing compound, grade A’ complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete wall, floor and roofs exc 20mm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exec 20cm wide complete all as specified and directed.

M&L for RCC M-25 design Mix as in beams, cantilevers, bressumers, lintels upto 1.5 mtr span complete all as specified and directed.

M&L for RCC M-25 design Mix as in beams, cantilevers, bressumers, lintels over 1.5 mtr span complete all as specified and directed.

M&L for 100mm bore salt glazed stoneware drain pipe grade 'A' conforming to IS 651-1972 laid in trenches and jointed in cement mortar 1:1 complete all as speicified and directed.

S&F Tubular towel rail, 20 mm dia, D type, 60cm long between flanges chromium plated complete all as speicified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or beddinh layer im cement mortar 1:4 comlplete all as specified and directed.

BLANK

M&L for 20 mm thick granite(of any type)work (table rubbedand polished)in steps,jambs,pillare,wimdow cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in cement mortar 1:6 complete all as speicified and directed.

M&L for point wiring One light point or one fan point controlled by one, 1- way switch in PVC casing & Caping complete with FRLS PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm( 22/0.30 or 30/0.25), 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface) and supply and fixing PVC conduit pipe heavy grade of nominal size 20 mm dia along with connected fittings/junction boxes using new MS sunk terminal boxes of thickness not less 1.22 mm, new 3 mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good complete all as specified and directed and suitable for the following: -

All as per item No 150 above but one 3/5 pin socket outlet, 6 Amp on “independent board” complete all as speicified and directed.

All as per item No 150 above but one 3/5 pin socket outlet, 6 Amp on the same board with other switches

All as per item No. 150 here in before but point wiring using 2.5 sq mm suitable for 16 amps “ independent board" with 2.5 sqmm PVC insulated unsheathed conductor wire connection to earth dolly complete all as specified and directed.

Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .

Supply & fixing socket out let 6 pin, 6 Amps flush type for point wiring complete all as specified and directed . .

Supply & Fixing switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for power point wiring complete all as specified and directed .

Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring all as specified and directed .

Supply, fixing, connecting & testing LED batten fittings 2 feet 10 Watt lumen output 130 lumen/watt , PF≥0.95 mounted luminaire having IP 65 protection and THD<10% with complete all as specified and directed.

Supply, fixing, connecting & testing T8 TLED fittings lumen output 130 lumen/watt , PF≥0.95 mounted luminiare suitable for armstrong /grid ceilings light of 20 Watt having IP 65 protection and THD<10% with complete all as specified and directed.

Supply, fixing, connecting & testing ceilings light 2x2 luminiare suitable for armstrong /grid ceilings light of 36 Watt having IP 65 protection lumen output 110 lumen/watt , PF≥0.95 and THD<10% with complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor for submain wiring alongwith earth wire with 4x6 sqmm+1x6 sqmm earth wire sizes of FRLS is pvc insulated copper conductor , single core cable insurface /recessed as required with 25mm pvc conduit pipe,surface conduit/concealed etc complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor for submain wiring alongwith earth wire with 4x4 sqmm+1x4sqmm earth wire sizes of FRLS is pvc insulated copper conductor , single core cable insurface /recessed as required with 25mm pvc conduit pipe ,surface conduit /concealed etc complete all as specified and directed.

Supply & fixing TPN MCB Distribution Box of 12 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing MCB TPN,100 Amps 440 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. including accessories including making good disturbed surface to match the existing complete all as specified & directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.

Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed

Taking down main switches fuse unit, MCB/Kit kat distribution board with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified & directed.

Taking down existing old /worn out ceiling fan/Exhaust of indoor type fixed of any type/size with its all accessories including lamp complete all as specified & directed ( Note: Item deposited into MES store )

Supply & fixing DB with single phase & neutral MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing MCB SP, 06 to 40 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing MCB SPN, 63 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing ceiling fans complete with blades ,down rods , electronic regulator and accessories ,230V ,1200mm sweep .min air delivery 210 CFM with service valve 6.00 BEE .three star rated with brushless direct current ( BLDC) complete all as specified and directed.

Supply anf fixing LED Bldg security light fitting 35watt 230V AC outdoor type with high pressure die cast alluminium hosing and heeat resistant conplete with driver ,lamp bracket with impact and coorsion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed

Supply and fix water cooler electric driven ( single phase) , having approx storage capacity of 80 ltr and nominal cooling capacity of 40 litre per hour complete all as specified and directed

Supply and fixing industrial air turbo ventilator made by stainless steel (grade 304) material,0.60 mm (24 gauge) thickness, turbo fan size is round collar 600 mm and 304.8mm height (wind turbine) or rooftop of stainless steel and installation with using 1 inch long ,4mm thickness ,8mm head size screw/nuts&bolts,making it water proof and leakage proof complete all as specified and directed

Supply ,installation and cutting of old existing asbestos sheet, with using cutting blade as suitable size for installation of industrial air turbo ventillator wind turbine fan base plate of 3.00 mm thickness and 900 mm x1800 mm area in fibre glass, 100% water proof and leakage proof, weight bear capacity is 100 kg load, with using of self screw 76.20 mm long, 4 mm thickness and 8 mm head size,tighting all nuts/bolts/screw make it water proof and leakage proof complete all as specified and directed

Supply & fixing exhaust fans steel body AC single phase 230 volts of size 300mm sweep with ,blades and frame and louvers complete all as specified and directed.

Supply & fixing and testing of galvanised steel tubing 25 mm bore meadium grade with all fittings and fixed to walls and ceiling or laid in trenches complete all as specified and directed.

Supply & fixing and testing of galvanised steel tubing 80 mm bore meadium grade with all fittings and fixed to walls and ceiling or laid in trenches complete all as specified and directed.

M&L for cutting of existing pipe and making bends (any type, radius and angle) tapers any type, (straight bend, increasing or double socket etc) tee pies single branch Y junction, double branch, cross upto 150 mm bore, complete all as specified and directed.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed.

Supply and fix Gun Metal Globe or gate valve with iron wheel head, screwed both ends for iron pipe or for unions of 25 mm bore complete all as specified and directed.

S&F valves, sluice,flanged of class 1.6 PN, 80 mm (3" dia) complete all specified and directed.

Supply and laying cable XPLE insulated screened PVC bededed, unarmored, electric power cables (heavy duty) 1100 volts grade with standard aluminium conductor of size 70 Sqmm 3.5 core complete all as specified & directred.

Supply and laying cable XPLE insulated screened PVC bededed, unarmored, electric power cables (heavy duty) 1100 volts grade with standard aluminium conductor of size 6 Sqmm 4 core complete all as specified & directred.

Supply and spreading clean and dry screened sand (unwashed) in trenches around the , cable for protection of cable complete all as specified and directed.

Supply and laying sub class `B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M&L Boring of holes (manually) under road, hard standing without damaging the surface for 40/50 mm bore GI pipe, NOTE : (i) Depth of hole shall be 1 Metre below the top surface of Road/hard standing. (ii) Pipe shall be measured and paid seperately under respective items of the schedule complete all as specified and directed.

M&L 40 mm bore steel tuibing galvanised "Light Grade" in trenches/poles, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and directed.

Supply, fixing, connecting to electrical system & testing of Busbar panel board, cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally enclosed of size not less than 900 mm x 600 mm x500 mm and supported with 4 Nos MS Angle legs, duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted of PCC blocks double door type with locking arrangement with handle at front and openable at front & back bothe side with required hinges heavy duty, compartemtalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the folliwing accessories :- Incoming :- (a) MCCB 100 Amp 36 KA - 01 Set. Outgoing :- (a) MCB TPN 63 Amps - 02 Sets. (b) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 200 amprs rating (RYB) for phase and 1 No of neutral mounted on DMC support with heat shrink sleeve-1 set. (c) Ammeter anolog type having measuring range (0-300) amps with CTs etc including rotary switcvh to measure load of each pahse (d) Replacement of volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase RYB (e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20mm gradeded stone & plastering with (1:4) cement sand etc complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick directly burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5 metre below the ground level connected to GI strip 32 mm x 6 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore medium grade for protection of earth stip, PCC chamber 1:3:6 (Type C-1) using 20mm graded stone aggregate, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars at 150 mm centre to centre both ways, CI frame and charcoal dust and common salt, all as shown in electrical plate No 3 of MES SSR part-I and makeing test point as specified including excavation & earth work in any tyupe of soil and connecting the earthing to an earthing point/equipment as specified and directed & testing on completion. NOTES : (i) The concrete pit shall be made in PCC 1:3:6 type C-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover. (ii) Item inclues the cost of 7.5 metre GI pipe for protection of earth strip. Any variation in length shall be adjusted through deviation order. (iii) Items inclues cost of 7.5 metre earth lead strip, Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thichness of 15 cm on all sides complete all as specified and directed.

M/s NSA Engineering Corporation

M/s Highway Construction

SHRIPATI INFRASTRUCTURES PVT LTD

R.K.ASSOCIATES