Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.2 LAccepted-AOC GURHA BRAHMANA TEH AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹30.2 L+₹1.8 L (6.49%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹33.3 L+₹4.9 L (17.3%)Rejected-Finance PATOLI BRAHMANA WARD NO 02 PO MUTHI TEH DISTT JAMMU J K PIN 181205 | JAMMU | JAMMU AND KASHMIR | 181205 | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹33.9 L+₹5.5 L (19.5%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REPAIRS TO ROOF, SHAFT, GALVALUME SHEET AND CHAJJA ALONG WITH CONNECTED ITEMS IN ZONE B AND CERTAIN B/R REPAIRS IN MES INSTALLATION IN DAMANA UNDER GE JAMMU
2022_MES_559985_1
GEJC-50/2022-23
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹80,000
Yes
13 Dec 2022
27 Oct 2022
28 Nov 2022
27 Oct 2022
26 Nov 2022
11 Nov 2022
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge. Note: - Rates are deemed to be included for patches work.
Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and as directed. (including all necessary scaffolding, lifiting arrangement).
Material and labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of concrete or brick surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brick work using old size sub class ‘B’ bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.
Description all as per Ser Item No 6.00 here-in-before but except bricks complete all as specified and as directed.
Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:6) complete all as specified and as directed.
Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks, cupboard frame etc including one shop coat of zinc chromate primer paint (including preparation of surface), (cutting holes in brick masonry walls and fixed with PCC 1:1½:3) and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.
Material and labour for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410W (Gde 'E' 250) quality 'B' complete all as specified and as directed.
Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) as in copings, bed block etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete and removing from site all as specified and directed by Engineer-in-Charge.
Material and labour factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 No's 25 x 25 x 3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.
Material and labour factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 No's 25 x 25 x 3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and as directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mile steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
Supply and fixing mild steel butt hinges medium weight 75 mm long complete all as specified and as directed.
Supply and fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 35mm thick factory made Ist class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I section 8.24 (b), supplied and fitted to chowkhats complete all as specified and as directed.
Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.
Supply and fixing aluminium handle cast type, anodised size 150mm long, 'D' type complete all as specified and as directed.
Supply and fixing aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and as directed.
Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fixing in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fixing in repairs helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and as directed.
Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and as directed.
Supply and fixing 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and as directed.
Description all as per Ser item No 30.00 here-in-before but frosted glass complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.
Supply and fixing for frame work for ceiling with specification as under mentioned:- (i) GI section frame work (powder coated) for white, pre-premiered, self embossed, reinforced designer board / ceiling board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm cente to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed / laid / inserted to GI framework at ceiling with screws complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10cm girth complete all as specified and as directed.
Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.
Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.
Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and as directed.
Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 20mm complete all as specified and as directed.
Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.
Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.
Material and labour for complete removal of vegetations, roots and shrubs from wall and making good the wall with PCC (1:2:4) type B-0 not exceeding 1 Sqm including necessary arrangement of all scaffolding up to 12 metre height of building complete all as specified and as directed.
Material and labour for disconnecting existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair PVC low level flushing cistern valve less, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 x 450 mm) long complete all as specified and as directed.
Supply and fixing in repair Vitreous china squatting pan 'Orissa' pattern' size 580 x 440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe etc. complete making good to floor as existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with sink coupling, plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm) complete all as specified and as directed.
Supply and fixing in repairs kitchen plate rack of stainless steel of size 900 x 800 x 230mm made out of 1mm thick stainless steel sheet complete all as specified and as directed.
Supply and fixing in repairs Vitreous china wash hand basin white, flat back of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia complete all as specified and as directed.
Supply and fixing in repairs brass chromium plated mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Supply and fixing PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.
Supply and fixing 15mm bore long body bib tap cast copper alloy fancy type chromium plated with capstan handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fixing PVC waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and as directed.
Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and as directed.
Supply and fixing in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Supply and fixing angle / stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and as directed.
Supply and fixing swivel shower rose chromium plated with arm 15mm size 195mm long complete all as specified and as directed.
Supply and fixing grating doom 100mm dia without hole chromium plated complete all as specified and as directed.
Supply and fixing grating doom 100mm dia with hole, chromium plated complete all as specified and as directed.
Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.
Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.
Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.
Supply and fixing in repair curtain rod chromium plated / PVC coated, mild steel, with fixing brackets, side ball stops, rollers, etc complete all as specified and directed.
Dismantling PVC water tank / demolition of RCC water storage tanks of capacity upto 1000 litres and removing from site complete all as specified and as directed.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as direcetd in SSR Part I.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part I.
Supply and fixing in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Description all as per Ser item No 72.00 here-in-before but as in skirting including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.
Material and labour glazed ceramic coloured tiles 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.
Supply and fixing machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer–in-Charge.
Supply and fixing machine cut kota stone slab 18-20mm thick over 10 mm thick as in vertical surface over rendering in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer–in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc all as specified and directed.
Material and labour granite 20mm thick (pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.
Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling timber scantling 40 Sq cm and over in section framed work of any description complete all as specified and as directed.
Supply and fixing for structural steel works of Fe 410W (Grade 'E' 250) quality 'A', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate / red oxide primer paint (including preparation of surface) before fabrication complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface all as specified and directed.
Material and labour for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
Material and labour for applying two coats of cement based paint over a coat of primer including preparation of new plastered surface of wall complete all as specified and as directed.
Material and labour for two coats of oil bound distemper of wall to old plastered surfaces including preparation of surfaces complete all as specified and directed.
Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.
Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of cement based paint on old prepared surfaces of walls all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area all as specified and directed by Engineer-in-Charge.
Material and labour for 50mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.
Material and labour for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggrregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Supply and fixing chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments including and over 15mm thick screed bed or bedding layer of cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and as directed.
Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block in glossy finish with grey / coloured cement and pigment, any shape and size confirming to IS 15658-2006, M-35 grade complete all as specified and as directed.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
Material and labour for mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exceeding 30 cm long complete all as specified and as directed.
Material and labour for second class hard wood clean sawn timber as in framed work, truss etc fixed in repairs scantling including cutting, drilling, fixing with nails, screws etc complete all as specified and as directed.
Material and labour for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described and treated with tar or coal tar black paint complete all as specified and as directed.
Material and labour for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus, moss, dust etc., cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab complete all as specified and removing the debris outside defence land all as directed.
Material and labour for rendering 20 mm thick in cement mortar (1:4) on concrete surfaces including mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and as directed.
Material and labour for cleaning the roof surfaces and applying bitumen primer @ 0.30 kg / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.00 kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N / Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15 cm end laps, laying by application of torch and applying industrial bitumen 85 / 25 @ 1.2 kg / Sqm on top surface complete all as specified and directed.
Dismantling of cast iron 100mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.
Dismantling of cast iron 75 mm or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.
Supply and fixing PVC (SWR) pipes 110 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 75 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and directed.
Supply and fixing PVC (SWR) junction double (double T) equal or unequal provided with access door of 110 mm dia complete all as specified and as directed.
Supply and fixing PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and directed.
Demolition of deteriorated reinforced cement concrete of chajjas and similar suspended work by using cutter and flushing the surface complete all as specified and as directed.
Material and labour for rendering 10mm thick in cement mortar (1:4) on fair faces of concrete surface as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick surface finished fair and even without using extra cement etc. complete all as specified and as directed. (including all necessary scaffolding, lifiting arrangement for external surfaces up to three storey buildings).
Material and labour for rendering 20mm thick in cement mortar (1:4) on concrete surface including two or more dubbing coat including necessary formwork and scaffolding surface finished even and smooth without using extra cement such as chajjas, upward fascias and similar items up to four storey building including two coats of white wash complete all as specified and as directed.
Material and labour for rendering 15 mm thick cement plaster (1:3) on other than fair faces of concrete surfaces as on fascia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (including all necessary scaffolding, lifting arrangment for three storey building on external surfaces) complete all as specified and as directed.
Material and labour for applying two coats of exterior emulsion paint any colour over a one coat of primer up to 12 metre height in patches on newly plastered surfaces of fascias, chajjas and roof projection complete all as specified and directed, colored approved by Engineer-in-Charge.
Material and labour for complete removal of existing surface and applying two coats of exterior emulsion paint any colour over one coat of primer up to 12 metre height complete all as specified and directed, colored approved by Engineer-in-Charge.
Material and labour for cutting and derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and making good with PCC (1:2:4) including finishing the surface to match the existing shade complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
STAR CONSTRUCTIONS
M/S VERMA ENTERPRISES
M/s Koul & Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .