Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹43.1 L+₹1.7 L (4.08%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹43.8 L+₹2.3 L (5.66%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹44.1 L+₹2.6 L (6.37%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹44.7 L+₹3.2 L (7.75%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC Higher bid value |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
13 Sept 2024, 6:00 pmClosed
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF STEEL FURNITURE AT MD ACCN AT RMS
2024_MES_667599_2
8778/C/E8
Open Tender
Civil Works
Item Rate
210 days
RANGAPAHAR
Class D
category d(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹83,000
24 Sept 2024
31 Aug 2024
16 Sept 2024
31 Aug 2024
13 Sept 2024
7 Sept 2024
31 Aug 2024 - 4 Sept 2024
Amount
Almirah large steel with shelves (FD-1031) Taking out old unsv components of Almirah large steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge.
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel legs made out of 1mm thick MS Sheet
New shelves made out of 1mm thick MS Sheet..
Fixing of shelves in existing position with appropriate size MS revits
Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, steel screw/revits) and adjustment for smooth functioning as specified.
M & L for de-rusting, denting scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint "Satin finish" (Almirah shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally and externally with spray gun complete all as specified and as directed by GE/Engr-in-charge.
Almirah medium steel with shelves (FD-1032) Taking out old unsv components of Almirah medium steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge.
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel legs made out of 1 mm thick MS Sheet
New shelves made out of 1 mm thick MS Sheet.
Fixing of shelves in existing position with appropriate size MS revits
Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, steel screw/revits) and adjustment for smooth functioning as specified.
M & L for de-rusting, denting scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint "Satin finish" (Almirah shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally and externally with spray gun complete all as specified and as directed by GE/Engr-in-charge.
Almirah large steel 1/2 hanging x 1/2 shelves (FD-1033) Taking out old unsv components of Almirah steel 1/2 hanging x 1/2 shelves and S& F New components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel hanging rod 20mm dia CP conduit pipe of wall thickness 1.25 mm
New shelves made out of 1 mm thick MS Sheet.
New steel sockets 25mm dia chromium plated with fixing steel screw.
M & L for de-rusting, denting scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint "Satin finish" (Almirah shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally and externally with spray gun complete all as specified and as directed by GE/Engr-in-charge.
Book shelf open small steel (FD-69(M) Taking out old unsv components of Book shelf small steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New pieces of angle iron 40x40x3mm thick of 100 mm long and welded to the worn out piece of legs the Book shelf and also spot welding of cracks and joints,
New shelves/bottom/top made out of 1 mm thick MS Sheet.
M & L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Teapoy Varandah (FD-255) Taking out old unsv components of Teapoy varandah and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated MDF board teak face make-Green/Centure/ Archid duly provided 4 mm thick teak wood beading alround the top.
New leg made out of 20mm thick steel condute pipe of wall thickness 1.6 mm.
New hard rubber shoes with inside steel washers for legs.
M & L for welding and adjustment of legs to the Flat iron and painting of frame with one coat of synthetic enamel paint white after preparation of steel surface.
Table steel 900 x 900 x 760mm (FD-1009) Taking out old unsv components of Table Steel 900 x 900 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated MDF board teak face makeGreen/Centure/ Archid duly provided 4 mm thick teak wood beading all round the top.
New legs made out of 25 mm square tube 1.6 mm wall thickness.
New hard rubber shoes with inside steel washers for legs.
M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified.
Table Steel 900 x 600 x 760mm with drawer (FD-1008) Taking out old unsv components of Table Steel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated MDF board teak face make-Green/Centure/Archid duly provided 4 mm thick teak wood beading all round the top.
New GI lock 4 lever with 2 keys Make:Godrej/Novex / Link / Priya.
New legs made out of 25 mm square tube 1.6 mm wall thickness.
M & L for repairing of drawer by replacement of MS channel providing welding & denting.
New long bottom stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New short stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New hard rubber shoes with inside steel washers for legs.
M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified.
Table bed side (FD/E6/MAP/15(R) Taking out old unsv components of Table bed side and S & F new components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New front leg made out of 20mm dia steel square tube of wall thickness 1.6 mm.
New rear leg & top rail made out of 20mm dia steel square tube of wall thickness 1.6 mm.
New hard rubber shoes with inside steel washers for legs.
New drawers made out of 18mm thick pre-laminated MDF board on fron side and plywood sides and bottom including telescopic channels all as specified and as directed.
New side made out of 18mm thick pre-laminated MDF board.
New top made out of 18mm thick pre-laminated MDF board and providing 4 mm thick teakwood beading.
M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enael paint black, complete all as specified.
Chair Varandah with Nylon Newar (FD-256)
S & F new pieces of conduit pipe 20mm dia of 75 mm Long and 1.6mm thick and welded to the worn out piece of legs the chair verandah and also spot welding of cracks and joints as specified and shown in drawing and as directed by Engr-in-Charge.
M & L for applying one coat of synthetic enamel paint white to the frame of the chair after preparation of surfaces as directed by Engr-in-Charge.
Removing old unsv tape newar from Chair Varandah and M & L for weaving with 50-55mm wide tape virgin nylon newar best quality light coloured as specified and shown in drawing and as directed by Engr-in-Charge.
New hard rubber shoes with inside steel washers for legs.
Bed hard (FD/E6/MAP/08(R) Taking out old unsv components of Bed hard and S& F new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New Top of 12 mm thick ply wood commercial BWR grade Make-Globe/Green/Archid
New pre-laminated MDF board 18mm thick teak face with PVC edging to head board.
New pre-laminated MDF board 18mm thick teak face with PVC edging to foot board.
New hard rubber shoes with inside steel washers for legs.
M & L for de-rusting, denting, scrapping, filling with putty including welding of joints and cracks to frame and preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.
Chair Varandah (FD/MAP-II/06) Removing old unsv PVC Seat from Chair Varandah and S & F new Components as per shape and size as existing all as specified and shown in drawing and as directed by Engr-in-Charge.
M & L for applying one coat of synthetic enamel paint white to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed.
New PVC seat
New PVC back
New hard rubber shoes with inside steel washers for legs.
Chair school with hand board (FD/E6/MAP/05) Taking out old unsv components of Chair school and S& F new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New hand board made of 18 mm thick pre-laminated MDF board teak face make : Green/Centure/Archid duly provided PVC beading balck all round the top & screwed to 20mm dia steel pipe inserted in 20mm dia MS rod welded to frame.
New leg made out of 25mm dia MS pipe.
New PVC one piece of seat and back
New hard rubber shoes with inside steel washers for legs.
M & L for applying one coat of synthetic enamel paint brown to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed.
Rack shoe steel (FD/E6/MAP/02(R) Taking out old unsv components of Rack shoe and S& F new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New leg made out of 25mm thick.
New shelves made out of 20mm dia frame & 3mm dia MS rod.
M & L for applying one coat of synthetic enamel paint black to the frame and spot welding of cracks and joints of the chair after preparation of surfaces as directed.
Charpoy IP with hard top (FD/MAP-II/01) Taking out old unsv components of Charpoy IP with hard top and S& F new Componentsin replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New Top of 12 mm thick ply wood commercial BWR grade Make-Globe/Green/Archid
New lege made of 32x32mm x 16 gauge & 440mm long
New hard rubber shoes with inside steel washers for legs.
M & L for de-rusting, denting, scrapping, filling with putty including welding of joints and cracks to frame and preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.
Teapoy verandah (FD/E6/MAP/17) Taking out old unsv components of Teapoy varandah and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated MDF board teak face make-Green/Centure/ Archid duly provided 4 mm thick teak wood beading alround the top duly polished with two coats of french polish.
New leg made out of 20mm thick steel condute pipe of wall thickness 1.6 mm.
New hard rubber shoes with inside steel washers for legs.
M & L for welding and adjustment of legs to the Flat iron and painting of frame with one coat of synthetic enamel paint black after preparation of steel surface.
KAILASH KUMAR LADHA (BID ID -3093256)
M/S BIJOYA LAXMI ENTERPRISE (BID ID -3091500)
SHRI HRIDAY NARAIN GIRI (BID ID -3093279)
SHRI MADAN SINGH (BID ID -3094851)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .