Construction of 33 KV line Sarhari Gorakhpur

Amount

Part-A (Material Provided by Contractor)

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm² ST. through

33 KV X-Arm

X-arm clamp with nut bolt for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make

33 KV Polymer Pin Insulator

Number Plate with clamp

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

Top channel clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

clamp for ST Pole 11mtr as stud pole with nut bolt by 50x8 mm MS flat Iron make

Stay complete 20x1800mm (Per Stay Set=01No stay Rod+10 Kg Stay wire/Stay + 01No Stay clamp)

Earthing Complete (Per set =01 No Earthing Rod + 2Kg GI Wire)

33 KV Polymer Disc Insulator B& S Type

33 KV Polymer Disc Fitting

P.G. Clamp for Dog

‘E’ Bracket for 33 KV with nut & bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

M.S. Angle Iron 65x65x6mm bracing set (1Set=02No Angle with 04 No clamp) with nut and bolt.

33 KV Guarding angle

GI Wire 5 mm (6 SWG)

33 KV Guarding angle Clamp with nut bolt for ST Pole with Nut and Bolt by MS Flat Iron make.

F-bracket with nut & bolt for ST Pole with nut bolt by MS flat Iron make

Extra angle for cable support

Clamp for extra angle support

Al. paint

Red oxide paint

PART - B- WORK Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

33 KV ‘XLPE’ Cable 3x300mm²

ST Pole 11 M Long

ACSR Dog Conductor

Concreting of pole and making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm stone ballast), back filling of earth, proper ramming. (as per UPPCL Norms)

Erection of Single pole structure on 13/11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Double circuit line)

Erection of Double pole structure on 13/11 mtr ST Pole including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Double circuit line)

Erection of Four pole structure on 13/11 mtr ST Pole including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Double circuit line)

Erection of Double pole structure on 13/11 mtr ST Pole for one side O/H and One side U/G line including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Double circuit line)

Erection of Single pole as stud pole structure on 11mtr ST Pole including all works of evocation of pit, pole erection, fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete).

Erection of Single pole structure on 13/11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Single circuit line)

Erection of Double pole structure on 13/11 mtr ST Pole for one side O/H and One side U/G line including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Single circuit line)

Erection of Four pole structure on 13/11 mtr ST Pole including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Single circuit line)

Erection of Double pole structure on 13/11 mtr ST Pole for one side O/H and One side U/G line including all works of evocation of pit, pole erection, fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete). (For Single circuit line)

Fabrication of 13 mtr. Long S.T. pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long by providing M.S. pipe.

Dismantling of existing ACSR Dog conductor and ready to use as Double circuit line.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 06 Nos. conductor in parallel. (For Double circuit line).

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Laying of 33 KV XLPE cable with HDD Method as per side requirement

Rising of 33 KV ‘XLPE’ cable in air after providing 6” dia.GI pipe 3m long Complete work. (GI Pipe +work)

Providing Special GI Pipe Earthing Complete for 33 KV ‘XLPE’ C/J Kit.

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor.

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² St. Through.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc.

Dismantling of existing PCC Pole

Dismantling of existing ST Pole

Dismantling of Existing X arm.

Dismantling of Existing Top channel/Bracing angle

Dismantling of Existing Bracing angle

Dismantling of Existing other steel item

Shifting, loading, carriage, unloading and receive back to store centre Gorakhpur

INDIA SUPPY CORPORATION (BID ID -5523279)

ARK ENGINEERING (BID ID -5523240)

M/s S.B.S. Traders (BID ID -5522770)