SPECIAL REPAIR TO LIBRARY HALL OF F COMBAT AT CME

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets), any thickness, including cover fillets all as specified and directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction all as specified and directed. Make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board: Gypsum or equivalent approved

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position (framed work) complete all as specified and directed.

M & L for dark shade vitrified ceramic tiles 10mm thick (square/rectangular) in floors, polished area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match the shade laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for dark shade vitrified ceramic tiles 10mm thick (square/rectangular) in vertical surfaces such as skinrtings, dado, polished area of each tiles not exceeding 0.36 sqm and n.exc 150mm high in skirting etc set and jointed in neat cement slury and pointed in white or coloured cement to match the shade, fixed over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in sub base of floors 75mm thick all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water and removal of debris out of MD land complete all as specified and as directed.

M & L for rendering 15mm thick on stone masonary surfaces in CM (1:6) finished even and smooth using sagol over and including 10 mm thick dubbing coat in CM (1:6) on other than fair face of brick/ stone masonry/concrete surface complete all as specified and as directed. Note: 1) Note: Dubbing coat shall be executed on order of GE in writing.

M & L for preparation of new surfaces any description and applying two coats of luster paint over and including 3 mm thick wall care putty of specified make complete all as specified and directed. Note : The shade/pattern as approved by the Engineer -in-Charge.

M & L for complete removal of existing treatment and preparation of old surfaces any description and applying two coats of luster paint over and including 3 mm thick wall care putty of specified make complete all as specified and directed. Note : The shade/pattern as approved by the Engineer -in-Charge.

M & L for preparation of old steel surface of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surface of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M&L for providing and fixing "RAJSHREE BRAND INSULATED UPVC WALL PANELLING (PLAIN) )" consisting of UPVC (Rigid) insulated panels having wall thickness of 2mm UPVC (Rigid) sheet of 700 Kg/cubic cm density manufactured by an ISO-9000 certified company, and the desired thickness of EPS (dependent on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The UPVC (RIgid) strips of 5mm thick UPVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement, 90 degree heat bent strips of 5mm thick UPVC (Rigid) sheets of width 75mmx75mm feathered at the edges shall be stuck at wall joints/pillars etc. including taking down old wall panelling complete all as per direction of Engineer-in-Charge, manufacturer's specifications & drawing. Make: Rajashree / Armstrong or other equivalent approved by GE.

S & F aluminum anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge.(Make : Hindalco/Indal/Ajit India pvt ltd) (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

M & L for point wiring for light/fan/bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type with 3mm thick pre laminated hylam sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc complete for the following:-

(a) One light/fan /bell point controlled by one switch

( b) ( d) One 5 pin 6 Amps socket outlet on same board.

(c) One 5 pin 6 Amps socket outlet on independent board.

M & L for point wiring for light/fan/bell with FRLSH cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly including MS sunken box/PVC box, surface/ flush type with 3mm thick pre laminated hylam sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for 6 pin 15 Amps multi pin socket outlet flush type on independent board & making good to disturbed surface of wall etc complete all as specified and directed.

Disconnecting and taking down existing ceiling fans of any size and depositing to MES store E/M store for safe custody complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of 3 core 0.5 sqmm copper conductor cable from ceiling rose or connector to fan complete all as specified and as directed.

S & F fan regulators electronic step type suitable for 1200 mm ceiling fans on existing circuit board and new circuit, colour of regulator match with circuit board colour as directed by Engr-in-charge.

S & F Switch piano, flush type single pole, one way 5 Amp 240 volts,complete all as specified and directed

S & F ceiling rose PVC/polycarbonate isolated body surface type 65x50mm, three terminals complete all as specified and directed.

S & F switch socket outlet combination, multipurpose,flush type, universal 2 in 1, 3 pin, 5 and 15 amps, 240 volts complete all as specified and directed.

S & F socket outlet flush type, 5 amps, 3/5 pin complete all as specified and directed.

S & F LED tube light fitting , recess mounting LED 2x2 luminaire 36 W, LED edge lit luminaire aesthetically designed flat panel which provide soft light and glare free symmetrical illumination suitable for flushing into false ceiling etc, prewired and all accessories,complete all as specified and directed. Make- Crompton cat No LCPL-36-CDL or equivalent model in Philips/Bajaj as approved by GE

S & F recess mounted directional COB spot light fitting 30W complete all as specified and directed. Make- Bajaj cat No BXDR 30 WH or equivalent model in Philips/Bajaj as approved by GE

S & F MCB distribution board SPN 240 volts 8 way double door with 200 amps rated bus bar, IP 43 complete all as specified and directed.

S & F MCB distribution board SPN 240 volts 12 way double door with 200 amps rated bus bar, IP 43 complete all as specified and directed.

S & F MCB SPN 40 amps, 230 volt 10 KA, C series complete all as specified and directed.

S & F MCB SPN 6-32amps, 230 volt 10 KA, C series complete all as specified and directed.

M & L for sub main wiring with two runs of 1.5 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 1.5 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC conduit of desired colour and size with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 1.5 sqmm single core multi stranded PVC copper conductor, one run of 1.5 sqmm single core multi stranded PVC copper conductor and one run of PVC conduit shall be measured as one length for payment.

M & L for sub main wiring with two runs of 4 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor (red for phase and black for neutral) & one run of 4 sqmm single core multi stranded FRLSH PVC insulated and unsheathed copper conductor wire green coloured for earthing of grade 1100 V, FRLSH cable in and including electrical grade PVC casing caping of desired colour not less than 1.2 mm thick and 25 mm wide with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note: Two runs of 4 sqmm single core multi stranded PVC copper conductor, one run of 4 sqmm single core multi stranded PVC copper conductor and one run of PVC casing caping shall be measured as one length for payment.

M & L for earthing complete with Gl earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, with and including PCC chamber in PCC (1:2:4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade, Gl pipe for lead protection with and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part I connected to earthing test point all as specified and indicated including testing on completion including retrieving of old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents regulators, sockets etc revoming materials to store for seperately) and making good disturbed surface of walls, floors etc complete all as specified and directed.

Taking down main switch/MCBs/DBs of any make and type including Teakwood board etc complete and making good disturbed surface of walls with matching type and colour of paint complete all as specified and directed.

S.K.HARAL

T.H.ASSOCIATES

Aakar Construction