REPAIR MAINT TO CHLORONOME PLANT CI GI PIPE LINES AND ALLIED WORKS AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth in soft / loose soil and getting out for removing / laying of pipe lines complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground, floors or pavings not exceeding 15 Cm thick below or above ground level complete all as specified and directed.

All as per item No 2 above but hard surfaces such as in road cutting/ hard standing etc including making good disturbed surfaces to match with originalcomplete all as specified and directed.

Returning and filling including spreading, levelling, complete all as specified and directed. by Engr-in-Charge.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting pointcomplete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate as in floor / hard-standing & finished the surface even and smooth without using extra cement to match with the existing surface complete all as specified and directed.

Dismantling and taking up or down unserviceable / cracked steel tubing with all fittings including separting the serviceable tubes, cleaning the same and keep aside for re use of the following sizes as directed :- Note :- Excavation and other earth work will measured and paid separtely for steel tubes / pipes laid in trench for 15mm dia

Ditto all as per item no 7 above but for 20mm dia

Ditto all as per item no 7 above but for25mm dia

Ditto all as per item no 7 above but for40mm dia

Ditto all as per item no 7 above but for50mm dia

Ditto all as per item no 7 above but for100mm dia

Supply , Laying, jointing and leakage testing GI Pipe medium grade including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches as specified and as directed at site of the following sizes :- (Notes for Sl No 13 to 18 :- (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticular building block . 15 mm dia

Ditto all as per item no 13 above but for 20 mm dia

Ditto all as per item no 13 above but for 25 mm dia

Ditto all as per item no 13 above but for40 mm dia

Ditto all as per item no 13 above but for 50 mm dia

Ditto all as per item no 13 above but for 100 mm dia

Re-laying, jointing old steel tubing and connections in new or old position including new fittings such as bends, elbows, union, tees, reducers etc; as required at site laid in trenches or on floors complete all as specified and as directed of the following sizes :- 15 mm dia

Ditto all as per item no 19 above but for 20 mm dia

Ditto all as per item no 19 above but for 25 mm dia

Ditto all as per item no 19 above but for 40 mm dia

Ditto all as per item no 19 above but for 50 mm dia

Ditto all as per item no 19 above but for 100 mm dia

M&L for Run lead joint for CI/DI/GI water mains / fittings and finishing complete all as directed for 80mm dia pipe

M&L for Run lead joint for CI/DI/GI water mains / fittings and finishing complete all as directed for 100 mm dia pipe

M&L for Run lead joint for CI/DI/GI water mains / fittings and finishing complete all as directed for 150 mm dia pipe

Labour only for cutting of CI/DI/GI pipe 80mm to 200 mm dia carefully in repairs for inserting fittings such as bend, tee, socket pieces, collar etc; complete all as specified and as directed.

S&F gun metal iron gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified of the following sizes including dismantling the old unserviceable existing valve complete :- 20mm dia

Ditto all as per item no 29 but 25mm dia

Ditto all as per item no 29 but 40mm dia

Ditto all as per item no 29 but 50mm dia

Ditto all as per item no 29 but 15mm dia

S&F in replacement, PVC Float valve (PTMT) 15 mm size with epoxy coated aluminium rod and high density polythene ball complete all as specified and as directed.

All as per above item No Sl item No 34 here-in- before but 20 mm size.

S&F in replacement, PVC bib cock , standard with male thread, complete all as speciifed and as directed for 15 mm dia

Ditto as per item no 36 above but 20 mm dia

M&L for opening up of leaking sluice valve stuffing box of 80/100 mm dia size and replacement of gland packing, nuts, bolts and washers etc; all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead GI Strip 25x4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Material and labour for construction of block masonry valve pit / chambers of size 1.0m x 1.0m x 1m including necessary excavation in any type of soil. PCC 1:3:6 type C2 using 40mm graded stone aggregate as in bedding foundation / coping, PCC block masonry, 15 mm thick plaster in CM 1:4 on both side of valve with and including MS fabricated cover with angle iron frame of size 32mm x 32mm x 4mm and CRCA sheet 2mm thick with locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer on both side of the cover complete all as specified and directed .

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried inground or drawn inconduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required Aluminium Strip 25x3mm complete all as specified and directed .

Taking down/refixing of Suction sweeper pump, Submersible, Submersible non clogging, Mono Block and booster pump after repair/ replacement of the following spare parts mentioned against item no-43 to 52,54 to 77and the same will be measured as "supply only"

Supply only Bearing No 6204 1HP motor

Supply only Bearing No 6205 1HP motor

Supply only Bearing No 6207 5HP motor

Supply only Bearing No 6208 5HP motor

Supply only Bearing No 6305 7.5HP motor

Supply only Bearing No 6306 7.5HP motor

Supply only Bearing No 6307 10 HP motor

Supply only Bearing No 6308 10HP motor

Supply only Bearing No 6308 25HP motor

Supply only Bearing No 6309 25HP motor

Winding with PVC supper enameled insulated copper wire.

Supply only Shaft suitable for 1 HP

Supply only Shaft suitable for 5 HP

Supply only Shaft suitable for 7.5 HP

Supply only Shaft suitable for 10 HP

Supply only Shaft suitable for 25 HP

Supply only Shaft suitable for 30 HP

Supply only Shaft suitable for 41 HP

Supply only Bush suitable for 1 HP

Supply only Bush suitable for 5 HP

Supply only Bush suitable for 7.5 HP

Supply only Bush suitable for 10 HP

Supply only Bush suitable for 25 HP

Supply only Bush suitable for 30 HP

Supply only Bush suitable for 41 HP

Supply only Impeller suitable for 1 HP

Supply only Impeller suitable for 5 HP

Supply only Impeller suitable for 7.5 HP

Supply only Impeller suitable for 10 HP

Supply only Impeller suitable for 25 HP

Supply only Impeller suitable for 30 HP

Supply only Impeller suitable for 41 HP

Supply only Nuts, Bolt and washers

Supply only Gland packing

Supply only Gasket suitable for 5 to 41 HP

Disconnecting electric connection from starter, lifting up the submersible/ Non clog submersibl motor and pump with the help of chain pulley and diconnecting the GI column pipe by opening nut and bolts. transportation the submersible motor from pump house to workshop for repair to submersible pump assembly 3/4 stage and replacement of old rusted shaft, S/S bush , impeller , impeller lock nut complete and transportation of repaired submersible motor to pump, connecting electrical connection to star delta starter and lowering down pump set with the help of chain pulley and connecting GI column pipe 150mm by proving 5mm thick new gasket with the help of nut and bolt suitable for 25 to 30 HP and testing complete all as specified and directed.

Lifting up the Non Clog submersible motor and pump by disconnecting star delta connection from starter with the help of chain pulley and disconnection the GI coloum pipe by opening nut and bolts and replacement of old rusted GI Column Pipe heavy grade of size100/ 150 mm dia in pieces of 3.3 metre long , both ends flanged in the bore/open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering down pump set with the help of chain pulley , connecting electrical star delta connection to starter, testing complete all as specified and directed.

S&F PVC insulated submerssible cable water proof flat type 3 core with standed copper conductor cable, 10 Sqmm, 1100 volts grade including cable lugs/joints, connection to submerssible motor and other end to aluminium armoured cable including jointing complete as directed.

All as per item No 80 above but of 16 Sqmm, 1100 volts submerssible cable complete all as specified and directed.

S&F for PVC flexible green pipe 40 mm dia for swimming pool complete all as specified and directed..

S&F for PVC flexible green pipe 100 mm dia for sewage pump complete all as specified and directed..

S&F star Delta starter fully automatic in sheet steel inclosure type ML-1.5F for 10 HP centrifugal monoset complete all as specified and directed.

S&F Fully Automatic Star Delta motor starter in sheet steel enclosure for motor rating AC-3 Duty , 415 V , 50 HZ , 3 Phase 30 HP with ISI marked complete all as specified and directed..

S&F Fully Automatic Star Delta motor starter in sheet steel enclosure for motor rating AC-3 Duty , 415 V , 50 HZ , 3 Phase 41 HP with ISI marked complete all as specified and directed..

Taking out old unserviceable chemical dozing pump electric operated of make RAMCO/AMS /DECRINE/PEARL including taking out defective parts, refixing the serviceable/new parts & reassembing the same after carrying out the necessary repair complete all as directed. (Note :- New parts required for replacing shall be measured and paid separately under relevant items of this schedule as "SUPPLY ONLY")

Opening the body of motor taking out burnt winding wire cleaning the the slot, rewinding the same with super enamelled copper winding wire of existing gauge, insulating material, varnishing and greasing and testing complete all as specified and directed.

Supply only the follwing parts of dozing pump for incorporating under following following spare parts :- Suction valve seat

Supply only Discharge valve housing

Supply only Antisyphon

Supply only Low level switch

Supply only Dia phragm

Supply only Foot valve assembly

Supply only Head

Supply only Tubing

Supply only Housing

Supply only EPU assembly

Stroke knob

PP ring

M&L for GI fittings ISI marked VIZ bends, reducers, tees, elbows, sockets, dummy plugs, complete all as specified and directed. up to 100 mm bore pipe.

Taking up or down any type GI / CI /DI / MS pipe 100 mm to 150 mm dia and connections , including cleaning for refixing or removal to store complete all as specified and directed.

Supply, laying,connecting and testing 150 mm bore, ductile iron pipes tyton joint class K- 7 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

Supply, laying,connecting and testing 100 mm bore, ductile iron pipes tyton joint class K- 7 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

M&L for Ductile special fitting such as bends,tapers.tee pieces(single and double branch) any type and angle/radius and straight connecting pieces but all end flanged complete all as specified and directed .

M & L for cleaning of RCC over head reservoirs by brooming down all the side walls and bottom and top,removing fungus,scales,dirt,sludge etc from inside and depositing the same at a distance not more than 100 mtr after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc and applying one coat of white wash on internal surface of the tank and writing date of cleaning in white capital letters on black back ground in sizes letter 80x10 mm with synthetic enamel paint and marking the direction of flow and painting one coat of black bitumen's paint to all inlets, outlets, washouts and over flow pipes complete all as specified & directed following capacity of tanks:- OHT RCC Capacity 50,000 Glns - 01 (Swimming Pool)

Ditto all as per item no 106 above but OHT RCC Capacity 50,000 Glns - 01 (CMH Pump House)

Ditto all as per item no 106 above but OHT RCC Capacity 100,000 Glns - 01 (GGS Pump House)

Ditto all as per item no 106 above but OHT RCC Capacity 100,000 Glns - 01 (MAP Pump House)

Ditto all as per item no 106 above but OHT RCC Capacity 50,000 Glns - 01 (New Pump House)

Ditto all as per item no 106 above but OHT RCC Capacity 50,000 Glns - 01 (MG Road Pump House

Ditto all as per item no 106 above but Fire Fitting Tank of Capacity 50,000 Glns - 04 (SASF )

Supply only spun yarn shall be hemp and good quality it shall be free of oil, tar or greasy substance and shall be sterilized quality complete all as specified and directed .

Supply only Pig lead or uniform quality and comply with IS specification complete all as specified and directed .

S&F cast iron air realease valve with double chamber flanged type IS 14845 of 150mm bore complete all as specified and directed .

Collecting and testing of water sample bottle from Pump houses of GGS, MG Road, New Pump House, Map Pump house and CMH pump house through govt authorised laboratory for testing of various parameters as per IS 10500 complete all as specified and directed by Engr-in-Charge, Note :- Test result will be submitted to AGE B/R office Each Pump House -02 Times

Supply only Bleaching powder stable Gd - I confirming to IS - 1065/ ISO -9001 CM/L - 1650852

Supply only ferric Alum

Supply only copper Sulphate

Supply Only Soda Ash

Supply only SQ Potassium Permagnate cat part No-26788,

Sodium Hypochlorite solution 4% -6% , cat part No-.S0865, Grade-LR

Supply only calcium Hypoclorite 65-70% (High strength calcium based granular chlorination chemical) more stable than Chlorine Gas and free from toxicity and safe for dringking water: Make Aquafit/PURICHLOR(Sree Rayalaseema) or equivalent Make as Approved by GE.

Supply only toe chain of 16 mm dia mild steel wire rope in which both side should be looped with looping hook complete all as specified and directed .

Supply only nylon rope of size 25 mm for suction sweeper motor.

Supply only 40 mm dia rope made out of san complete all as specified and diretced

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed .

Supply and fix single pointed air termination aluminium rod, 12mm dia, 300mm long with PCC block of size 300x300x40 mm and GI tubing medium grade upto length with base plate of size 30x30x6mm complete all as specified and directed .

Supply and fix testing and commissioning Integral LED aviation light luminaires comprising of aluminium hsg. with polycarbonate enclosure including making connection twin core twisted flexible wire complete all as specified and directed .

Supply & Fixing MCCB, 4 Pole, 160 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs complete all as specified and directed..

Supply & Fixing MCCB, 4 Pole, 250 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 200 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs complete all as specified and directed..

Supply & Fixing MCCB, 4 Pole, 125 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs complete all as specified and directed..

Supply & Fixing MCCB, 4 Pole, 100 Amps, 415 Volt, 16 kA including connecting up using suitable size of lugs complete all as specified and directed..

M&L for boring on existing CI pipe 80 mm to 200 mm dia size for branch connections of 25mm to 50mm dia by fixing of MS clamp 50x4mm cut to length and bent to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt etc and testing complete all as specified and direted.

Supply , Laying, jointing and testing GI Column Pipe heavy grade of size 150 mm dia in pieces of 3.3 metre long , both ends flanged in the bore/open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering as specified and as directed

Supply , Laying, jointing and testing GI Column Pipe heavy grade of size 100 mm dia in pieces of 3.3 metre long , both ends flanged in the bore/open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering as specified and as directed

Disconnecting electric connection from starter, lifting up the Centrifugal motor and pump with the help of chain pulley and diconnecting the GI column pipe by opening nut and bolts. transportation the Centrifugal motor from pump house to workshop for repair to Centrifugal motor assembly and replacement of old rusted shaft, S/S bush , impeller , impeller lock nut complete and transportation of repaired submersible motor to pump, connecting electrical connection to star delta starter and lowering down pump set with the help of chain pulley and connecting GI column pipe by proving 5mm thick new gasket with the help of nut and bolt suitable for 5 to 10 HP and testing complete all as specified and directed.

S & F NRV, class PN-1.6, heavy duty, both ends flanged all nuts, bolts, washers, gaskets etc; including dismantling of old unserviceable NRV complete of the following sizes as specified and directed :- 100mm dia

Ditto all as per item no 139 above but 150mm dia

S & F sluice valve, class PN-1.6, heavy duty, both ends flanged with steel spindle & check nut, CI operating wheel and all nuts, bolts, washers, gaskets etc; including dismantling of old unserviceable sluice valve complete of the following sizes as specified and directed 80mm dia

Ditto all as per item no 141 above 100mm dia

Ditto all as per item no 141 above 150mm dia

S.M. KAZIM

M/S CHAUHAN ELECTRIC WORKS