Loading
Loading…
Loading…
Tender Value
₹60.0 L
EMD Value
₹1.2 L
Closing Date
17 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR.DEN V
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Annual zone work repair and maintenance of station building and service building at DEE & DEC station in the section of SSE/W/DEE under ADEN/DEE.
44-2026-27-WV~NR
44-2026-27-WV
Open
Works - General
12 Months
Delhi, Delhi
₹0
₹1.2 L
24 Aug 2026
24 Aug 2026
3 Sept 2026
75 items across 1 schedule · ₹19,88,309.07 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Item rate for supply of liquid chlorine/Sodium Hypochlorite solution of Grade-I confirming to IS: 11673-1992 Sodium Hypochlorite solution shall only be taken in the standard 35 Ltrs. Capacity cans which should bear the manufacturer seal and should have the manufacturer's name and address. Sodium Hypochlorite solution manufacturered by reputed manufacturers as approved by Engineer Incharge for which testing shall be done in the approved laboratory and the testing charges shall be borne by the contractor, should only be taken. Each lot of Sodium Hypochlorite solution shall be got tested by the ADEN by a reputed Lab./test house as per Clause 6.1 of IS:11673-1992. The strength and composition of the Sodium Hypochlorite solution in terms of available chlorine, and impurities such as free alkali, free sodium carbonate, iron and sodium chlorate should be within limits specified in IS 11673-1992 for Grade 1 sodium hypochlorite solution. The solution shall be used only after the test result are received and the same are found satisfactory. Supply of sodium hypo chloride solution shall be taken in such quantities that it is consumed within a month in the winter months (Nov. to Feb) and once in two weeks in the summer months (March to Oct) from the date of testing of the material. (as per CE circular No. 819). The Sodium Hypochlorite solution should be first delivered to the SSEs Store by the supplier, and the same will be taken on the stock register by the SSE. The storage space shall be cool and dry away from direct sun light. The SSE shall maintain a summary position of supply of Sodium Hypochlorite solution to the centralized store, and testing of the solution will be made in appropriate performa including all lead, lifting at any height, loading, unloading, all taxes, charges, allL&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. Empty cans shall bereturned to the Agency after completion of the work as rates are for liquid chlorine only. Testing charges shall beborne by the the Agency. | Litre | 5460.00 | 16.6 | 90,636 |
| 2 | Item rate for replacement of defective submersible pump (2 to 3.o HP) of approved make including removing old pump & submitting the same in IOW store complete with all lead lift and , handling complete " | Each | 6.00 | 19,379.45 | 1,16,276.7 |
| 3 | "Description:""C/I/R Replacement of defective Starter (2 to 3 HP ) with new one of approved make including removing old & submitting the same in IOW store complete. """ | Each | 6.00 | 1,145.44 | 6,872.64 |
| 4 | Description:"Item rate for repairs to defective submersible pump (2 to 3.0 HP ) of approved make including removing old pump , get it fit for working in all respect ,fixing/installing in position & make all connections with in position & make all connections with his own cable etc. as a complete job. " | Each | 4.00 | 6,193.51 | 24,774.04 |
| 5 | IR for providing 2.5mm, 3 core , 1100 volts, grade copper wire of IS 644 make cable for submercible pump 2 to 3 HP Moter.complete as per NR speification with all L & M ,T&P complete job. Nothing extra is to be paid whatsoever the case may be. | Metre | 347.00 | 67.88 | 23,554.36 |
| 6 | Description:"Supplying of Milton Roy India Make Dosing Pump for 4 LPH at 5.5 kg /cm2 pressure . With necessary fitting to in let with container & outlet to rising main in the section SSE/W/DEE with maintenance period of 12 months Nothing extra will be paid whatsoever the case may be. " | Each | 7.00 | 17,313.36 | 1,21,193.52 |
| 7 | Description: Item rate for supplying & applying Eco Patch Geopolymer based quick setting cement mortar in 25 kg packing including all lead, lifting at any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing extr a will be paid whatsoever the case may be. | Kg | 530.00 | 130.09 | 68,947.7 |
| 8 | Description: Item rate for supplying & applying Insta Patch Geopolymer based quick setting bitumen mortar in 25 kg packing including all lead, lifting at an y height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. | Kg | 1000.00 | 26.46 | 26,460 |
| 9 | Description: Item Rate for P&F Health Flow System on wall near any type of WC Pan of Parko./ Mark/Hindware/ Hindustan or equivalent make with minimum 1 mtr: PVC tube and wall horn 15mm dia in appd: colour and shape incl:all fittings all screws, Nails, plugs etc: all loading , unloading, leading, lifting all heights , all taxes,charges, all L&M, T&P complete job. Nothing extra will be paid whatsoever the case may be. | Each | 30.00 | 1,053.37 | 31,601.1 |
| 10 | Description: Item rate for P&F stainless steel tower bolt 10" long including all nails, screws etc. with all L&M complete job. Rate will includes all L&M, T&P, taxes, charges etc: as a complete job. Nothing extra will paid in this account whatsoever the case may be. | Each | 25.00 | 147.74 | 3,693.5 |
| 11 | Description: Item Rate for Supply of M-Seal in the store of site incharge complete including all leading, loading,taxes, charges complete Job. Nothing extra will be paid whatsoever the case may be. | Kg | 20.00 | 250.66 | 5,013.2 |
| 12 | Description: Item Rate for Supply of Synthetic Adhesive/ Fevicol, in the section of SE/W in one kg packing,including all taxes. Charges, loading, unloading at any height, with all L & M as a complete job, so nothing extra shall be paid to affect this item whatsoever the case may be. | Kg | 50.00 | 221.66 | 11,083 |
| 13 | Description: Item rate for Supplying of Tapecrete water proofing solution of superior quality inluding all lead, lifting at any height, loading, unloading, all taxes, charges, all L&M, as a complete job. Nothing extra will be paid whatsoever the case may be. | Kg | 100.00 | 279.09 | 27,909 |
| 14 | Description: Item rate for supply of GI Union, 15 mm dia., in the section of SE/W of ISI brand Including all taxes etc. complete. So nothing extra will be paid to affect this item whatsoever the case may be. | Kg | 30.00 | 73.32 | 2,199.6 |
| 15 | Description: Item rate for supply of GI Union, 25 mm dia., in the section of SSE/W of ISI brand Including all taxes etc. complete. So nothing extra will be paid to affect this item whatsoever the case may be. | Each | 15.00 | 111.61 | 1,674.15 |
| 16 | Description: Item rate for Supplying of welding rod (electrode) of 10G in size and make of superior qualit y inluding all lead, lifting at any height, loading, unloading, all taxes, charges, all L&M, as a complete job. Nothing extra will be paid whatsoever the case may be | Each | 1000.00 | 5.49 | 5,490 |
| 17 | Description: Item rate for P&F stainless steel sliding bolt 300mm long and 16mm dia & edges of M.S.flat 25x6mm to make the sliding door bolt by welding cutting in siz e making hole including all loading, unloading,removing the defective sliding bolts etc all taxes, charges, complete job. Nothing extra will be paid whatsoever the case may be. | Each | 25.00 | 304.99 | 7,624.75 |
| 18 | Description: Re-development of tube well with compressor of required capacity with all L & M , T&P complete job. Nothing extra is to be paid whatsoever the case may be. | Hour | 350.00 | 413.5 | 1,44,725 |
| 19 | Description: Item rate for Supplying of PVC tank cover for 500 ltr. capacity inluding all lead, lifting at any height,loading, unloading, all taxes, charges, all L&M, as a complete job. Nothing extra will be paid whatsoever the case may be. | Each | 100.00 | 198 | 19,800 |
| 20 | Supply of PTMT Polytetramethylene terephthalate Pillar cock 15mm dia. weight not less than47gms.with marking "IR"complete including all leading, loading, taxes, charges complete Job. Nothing extra will be paid whatsoever the case may be. | Each | 50.00 | 187.11 | 9,355.5 |
| 21 | IR for supply of Block board construction flush door with commercial ply on both faces 35 mm thick | Sqm | 45.00 | 696.77 | 31,354.65 |
| 22 | Description: Item rate for P&F W. C. Pressure jet (ISI marked) of Parko or equivalent make in European type W.C. Pan with C. P. Angle valve, C. P. Tee and all other necessary fittings as per the direction of site engineer incharge including all lead, lifting at any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. | Each | 25.00 | 187.24 | 4,681 |
| 23 | Description: Item rate for P and F colored round or oval shaped wash basin of (Hindware / Perry ware or equivalent make) of 55X40 cm including pillar cock of fancy type and with necessary fittings and accessories, complete item including all taxes, charges all L and M complete job. Nothing extra will be paid whatsoever the case may be. | Each | 3.00 | 2,380.41 | 7,141.23 |
| 24 | Description:Item rate for P&F 19mm thick commercial Board of appro ved Qualit y. / ISI marked as per requirement of size & shape at site as per dr awing appro ved b y site engineer incharge including all taxes, nails, adhesiv e all L&M complete job. Nothing extra will be paid what so ever the case may be. | Sqm | 150.00 | 863.38 | 1,29,507 |
| 25 | Description:Item rate for cleaning of UG & OH water tank by high pressure disinfection by ultra voilet radiations, The total process comprises of the following steps i)Cleaning of intital slush and sedimentation etc and safe disposal of sluge outside Railway land/Boundary. ii)Total high pressure cleaning with mechanize using special high pressure rotary high pressure cleaning lances for total removal of calcinations, dirt and algea etc on the walls, pillars and flooring etc thoroughly to expose the original concrete wall/ floor. surface. iii)Removal of sludge by labour and by special industrial sludge removal pump. iv)Removal of dirt, find mud and fine particles etc by industrial vacuum cleaner v)Stabilization of all walls, flooring and pillera by special antibacterial agent for micro logical count reduction. vi)Final disinfection by special industrial ultraviolet radiation to ensure complete sterilization even in atmosphere of tanks 1)Water tanks of capacity beyond 6000 Lts | Kilo Litre | 1500.00 | 35.94 | 53,910 |
| 26 | Description:Rectangular shape 500x500 mm precast RC.C. manhole cover with frame - M.D. - 10 (As per drawing) | Each | 15.00 | 1,043.14 | 15,647.1 |
| 27 | Description:I/R for carrying out physical, chemical & bacteriological test of water from appvd.Test house comp including all L&M ,all taxes, charges complete job .Nothing extr a will be paid whatsoever the case may be . | Each | 24.00 | 1,750.37 | 42,008.88 |
| 28 | Description:Item rate for Supplying of Tri-Cycle Rickshaw in store of Engineer -InCharge with following specification Plastic Roto Moulded Containers of siz e 1190x910 mm(± 10 mm) at top, 760x490 mm(± 10mm ) at bottom , internal height of container 670mm (± 10mm ) with 4mm thickness plastic confirming to IS :12701:96.i. 1.RICKSHAW FRAME/ CHASIS: The frames should be of Neelam /KW Mark as per relevant IS code:IS:628 / IS:2016 For different component of tri-cycle chassis. The frame should be made of double pipe fitted with handle for driving the ricksha w, Chamita (fork), pedal, 2 Nos. flywheel, axle. A frame of MS angle of size 40x40x6 mm of minimum 1250 mm length to support the tricycle chassis. 2.WHEElS : Front wheel rim with 64 number of spokes of gauze 10 and rear wheel two numbers with 16 Nos. of spokes of minimum 16mm dia. MS round hollow pipe fitted with 6 ply motor cycle tyre specification should be embossed on the tyre 3.BRAKE: Standard Braking System on front wheel with locking arrangement 4. OTHER ACCESSORIES: a) Adjustable Driving seat with spring welded and same should be fitted in the frame. b) Bell should be fitted right hand side of handle. c) Chain assembly and front wheel should be provided with cover and mudguard. | Each | 2.00 | 30,562.96 | 61,125.92 |
| 29 | "Description: ""Ordinary Portland Cement grade- 43Supply of materials in the store of SSE/W including all lead, lifting at any height, loading, unloading, all taxes,charges, all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. """ | MT | 10.00 | 6,772.14 | 67,721.4 |
| 30 | Description: White Cement | MT | 0.02 | 17,322.24 | 346.44 |
| 31 | Description: Coarse sand (Minimum zone III ) | cum | 20.00 | 873.3 | 17,466 |
| 32 | Description: Fine sand (Zone IV) (Ordinary Sand) | cum | 20.00 | 636.92 | 12,738.4 |
| 33 | Description: Oxidized mild steel screws 20 mm | 100 Nos. | 20000.00 | 20.95 | 4,190 |
| 34 | Description: Oxidized mild steel screws 25 mm | 100 Nos. | 20000.00 | 22.65 | 4,530 |
| 35 | Description: Oxidized mild steel screws 40 mm | 100 Nos. | 20000.00 | 52.22 | 10,444 |
| 36 | Description: Nails Upto 25mm long | Kg | 45.00 | 45.3 | 2,038.5 |
| 37 | Description: Nails 25-100mm long | Each | 250.00 | 38.65 | 9,662.5 |
| 38 | Description: 1.0mm thick decorative laminated sheet (Mat finish) | Sqm | 14.86 | 344.12 | 5,113.62 |
| 39 | Description: 1.0mm thick decorative laminated sheet (Glossy finish) | Sqm | 14.86 | 306.71 | 4,557.71 |
| 40 | Description: Transparent acrylic sheet of approved quality 5mm thick | Sqm | 30.00 | 1,144.95 | 34,348.5 |
| 41 | Description: Ply wood 5 ply with commercial ply on both faces 6 mm thick | Sqm | 30.00 | 291.77 | 8,753.1 |
| 42 | Description: Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete | Each | 100.00 | 595.97 | 59,597 |
| 43 | Description: Anodized Aluminum hanging type door stopper | Litre | 80.00 | 16.31 | 1,304.8 |
| 44 | Description: Plaster of Paris | Kg | 30.00 | 7.02 | 210.6 |
| 45 | Description: Premium Acrylic exterior paint | Litre | 1000.00 | 202.39 | 2,02,390 |
| 46 | Description: G.I. pipes 15 mm dia medium class | Metre | 360.00 | 75.71 | 27,255.6 |
| 47 | Description: G.I. pipes 20 mm dia medium class | Metre | 60.00 | 98.46 | 5,907.6 |
| 48 | Description: G.I. pipes 25 mm dia medium class | Metre | 180.00 | 143.75 | 25,875 |
| 49 | Description: Miscellaneous G I pipe fittings as nipples/ elbows/ sockets/ bends for GI pipe work | Kg | 250.00 | 83.15 | 20,787.5 |
| 50 | Description: C.P. Brass bibcock 15mm | Each | 10.00 | 299.98 | 2,999.8 |
| 51 | Description: C.P.Brass long body bibcock 15mm | Each | 10.00 | 360.17 | 3,601.7 |
| 52 | Description: C.P.Brass angle valve 15mm | Each | 10.00 | 463.26 | 4,632.6 |
| 53 | Description: Full way brass valve with wheel 15 mm dia | Each | 20.00 | 196.15 | 3,923 |
| 54 | Description: Full way brass valve with wheel 25 mm dia | Each | 10.00 | 391.92 | 3,919.2 |
| 55 | Description: Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore | Each | 35.00 | 51.89 | 1,816.15 |
| 56 | Description: White plastic W C seat (solid) with lid C.P.brass hinges and rubber buffers | Each | 15.00 | 413.76 | 6,206.4 |
| 57 | Description: HP. or L.P. ball valve with polythene floats: 15 mm dia | Each | 148.00 | 141.44 | 20,933.12 |
| 58 | Description: H.P. or L.P. ball valve with polythene floats: 25 mm dia | Each | 25.00 | 413.72 | 10,343 |
| 59 | Description: Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 100.00 | 49.12 | 4,912 |
| 60 | Description: Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 100.00 | 62.11 | 6,211 |
| 61 | Description: C P brass Waste coupling 32/40 MM | Each | 30.00 | 82.82 | 2,484.6 |
| 62 | Description: CP brass Bottle Trap 32/40 MM | Each | 15.00 | 83.45 | 1,251.75 |
| 63 | Description: Chlorpyriphos 20% E.C. I Lindane 20% E.C. For termite treatment | Litre | 50.00 | 304.87 | 15,243.5 |
| 64 | Description: Fly proof wire mesh | Sqm | 350.00 | 251.97 | 88,189.5 |
| 65 | Description: Hollock wood in scantling | 10 cudm | 500.00 | 325.53 | 16,276.5 |
| 66 | Description: Hollack wood in planks | 10 cudm | 500.00 | 325.53 | 16,276.5 |
| 67 | Description: Water proof ply 12mm thick | Sqm | 25.00 | 502.32 | 12,558 |
| 68 | Description: Polyethylene Venyl Chloride water storage tank with cover and suitable locking arrangement | Litre | 4500.00 | 5.21 | 23,445 |
| 69 | 15 mm PTMT bib-cock long body with flange | Each | 200.00 | 260.64 | 52,128 |
| 70 | Anodised Aluminium tower bolt (barrel type) 300x10 mm | Each | 25.00 | 517.76 | 12,944 |
| 71 | Anodised Aluminium tower bolt (barrel type) 150x10 mm. | Each | 20.00 | 264.81 | 5,296.2 |
| 72 | Item rate for providing,erecting,& fixing in position 160 mmdia PVC RAIN WATER PIPE Conferming to IS-4985/1985 Including cost of elbow,shoket,bends of required degree & nessesry fittings.i.e MS Clamps/nut bolts etc. whenever requred including cutting & joining with approved adhesive with all labour & materials all leads,lifts,all taxes,charges all L&M Complete job.so nothing extra shall be paid whatsoever the case may be. | Running Metre | 30.00 | 461 | 13,830 |
| 73 | I/R for supply of Wormi compost as desired by the site engineer. Northing will be paid extra whatsoever the case may be. | Quintal | 7.00 | 306.82 | 2,147.74 |
| 74 | "Supply of Insecticide/Pesticide i. Lindane dust""" | Kg | 100.00 | 17.39 | 1,739 |
| 75 | Description: CIR for supply of weedicide to SSE/Works store as directed by him. The rate included all taxes, etc,.So nothing extra will be paid to contractor whatsoever the case may be. | Litre | 50.00 | 710.06 | 35,503 |
| Schedule total | ₹19,88,309.07 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
StandardTenderDocument2022R5.pdf
ATTACHMENT
GCC-2022withCSupto11.pdf
ATTACHMENT
Specialinstructionstothetenderer.pdf
ATTACHMENT
Annexure-I.pdf
ATTACHMENT
Annexure-II.pdf
ATTACHMENT
ACS 12 of GCC 2022
ATTACHMENT
GCCACS-123389822Dated12.08.2026_compressed.pdf
ATTACHMENT
GCCACS-123389822Dated12.08.2026_compressed.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].