WBPWD/SSE/SWEC/NIQ151/2025-26

S & D of following size 1.1 Kv grade XLPE insulated Al/A cable.(Make- Polycab/Havells/Gloster/RR Kabble)

a) 4 core 16 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

b) 4 core 10 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

c) 2 core 6 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

Laying of one no cable upto 35 sq.mm in underground trench 460 mm x 760 mm average depth with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brtick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.[F-2/1-a]

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earth attachment in 10 SWG GI(Hot Dip) Wire, making holes etc. as necy mending good damages and painting.[F-2/1-a]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [F-4/7]

a) 4 core 16 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

b) 4 core 10 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

c) 2 core 6 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

a) 4 core 16 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

b) 4 core 10 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

c) 2 core 6 sq.mm 1.1 Kv grade XLPE insulated Al/A cable

Supply & Delivery of 9 Mtr. Steel Tubler Pole (Zindal/Bansal) as per specification Type 410 SP-27 as overall length 9 mtr. Weight 108 kg & having diamention are out side dia & Thickness of the bottom section (114.3 x 5.40) mm, middle; (88.9 x 4.85) mm, Top section (76.1 x 3.25) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangment if ieqd as per direction of EIC.

Supply & Delivery 3" dia 2 Mtr. Long heavy gauge GL pipe (Minipole) having M.S sole plate welded with drilled hole at bottom of the pole to be insltalled on roof top incl. painting.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Erection of Single Steel tubular pole of 9mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

S&F 50 mm. dia 1.5 Mtr. long detachable type Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

a) 1st coat of aluminium paint over one coat of RO priming

b) 2nd coat of aluminium paint over 1st coat

S & fixing of 250V,100Wt LED Street light fittings complete with all accessories street light luminaire with excellent thermal management (Make -TRP-411-100-57-SL-GL-NSG or eqv make of Philips/Bajaj)as per direction of EIC.

S & fixing of 250V,60Wt LED Street light fittings complete with all accessories street light luminaire with excellent thermal management (Make -TRP-409-60-57-SL-GL-NSG or eqv make of Philips/Bajaj/Century)as per direction of EIC.

Inter connection of HPSV fittings by 2 x 1.5 sq.mm PVC insulated copper wire from loop box with 19mm bore PVC polythine pipes as per direction of EIC.

Supplying & fixing medium gauge 40mm Dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Earthing the installation by 2"(50mm)dia ISI(M) GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as per GS in morrum soil.

Connecting the equipments to earth busbar including S & F No.4 SWG GI(Hot Dip) wire of size on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages as per GS.

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil

S & Delivery of the following sizes 1.1 KVA Gr XLPE insulated Armoured AI Cable Make :Polycab/Havells/Gloser/RR Cable) a)4 core 70 sqmm.From DG to panel

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed a) 4 core 70 sqmm

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting A) 4 core 70 sqmm

S & F Compression type brass cable ground complete with brass gland ,brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cables below. A) 4 core 70 sqmm

Finishing the end of the following XLPE/PVC armoured cables by crimping method incl S&F solderless socket (Dowels make),tapes anticorrosive paste & jointing materials. A)4 core 70 sqmm

Construction of DG Set Foundation size by 11.5 (L) x 8(W) x 2 (D)Ft(above GL) & 1 Ft (under GL) ordinary cement concrete mix 1:5:3 with graded stone chips of 20mm down pakur variety laying concrete base (1:3:6) using 40 mm down stone metal & single brick flat solling of picked jharna brick incl. at shuttering work by 25 mm to 30 mm thick wooden plank also reininforcement with 8 mm for steel atleast 181 KG total, this rate are incl. all materials ,labour charges & carrying etc.(suitable for 30KVA DG set)

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of copper bar flat 50mm x 5 mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts ,nuts,washers,spacing insulators etc. as required as per GS.

Connecting the equipments to earth busbar including S & F copper strip of size 25mm x 5mm in UG trench with necy arrangement.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Excavation charge of soil for installation of Earth Electrode and filling & ramming.(For Morrum Soil)

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. A)80 mm dia

Connecting the equipments to earth busbar including S & F SWGGI (Hot Dip) wire of size.(As per PWD/GS)

Supply & pour of H.S Diesel oil for necessary commissioning of new DG incl. transportation cost .

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) [J-1/1]

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protec [J-1/4]

(a) Length upto 0.5 Mtr

(b) Length above 0.5 Mtr

Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint [J-1/5]

Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required

Excavation of soil for installation of Earth Electrode and filling & ramming for morrum soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below ISI-Medium GI pipes as to GS

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete wit

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 4 SWG

S & I Of Glow Sign Board Made from 40x40x5 mm MS angle 40x5 mm MS flat having the provision for opening from front by 25x25x5 mm MS angle,3 nos hinges duly welded.The board should be enclosed from out side by 20 SWG GI SHEET except the front.The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thick white PVC sheet of export quality having suitable size & ton be fixed on the front structure by S & F suitable size aluminium angle.SS Screws .The matter is to be incripted on a whole best quality venyle sheet as per approved size,colour & matter will be pasted properly over the PVC sheet. S & f of required nos 4ft 18w LED tube light fittings(Philips/Bajaj/CG)including making entire connection with 3 x 1.5sq.mm standard copper wire through flexible PVC pipe for proper illumination of the GSB from inside as per direction of EIC. (Matter should be incripted in BENGALI or ENGLISH)