ADDN/ ALTN TO EXISTING OFFICE COMPLEX (BLDG NO. P-15, P-14, P-9, P-13) AND OTM ACCN IN VICINITY OF SITABUILDI FORT, NAGPUR UNDER GE KAMPTEE

Amount

Dismantling of asbestos cement (corrugated , semi-corrugated, etc) sheets in roof coverings, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets of any description in any thickness including cover fillets, complete all as specified and directed.

Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

Supply and fixing Mild steel sheet eaves, gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc. with necessary MS clamps required at site with fixing arragement and two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Taking down cement or cement lime plaster any description, on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area exc 1.5 sqm but nexc 4.00 Sqm , complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area n exc 1.5 sqm, complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/loose soil, complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles, complete all as specified and directed.

Demolition Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc, complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, charnel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 410(Gde E-250), complete all as specified and directed.

M&L 2nd class hard wood in scantling clean sawn and unframed timber, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coat cresoat oil, complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for Brick work with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in two layers , 1st coat 10mm thick plaster in CM 1:4 and 2nd coat of 5mm thick in CM 1:4 mixed with WPC as per manufactures instruction finishing the surface even and fair, complete all as specified and directed. Note: WPC shall be measured separately.

Supply only integral waterproofing liquid , complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:6 , finished even and smooth without using extra cement , complete all as specified and directed.

M&L for cutting chases, plaining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 10cm but n exc 20cm girth brick wall, complete all as specified and directed.

Supply & fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing, complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing, complete all as specified and directed.

M & L for TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups cut to length, bent to shape required, including cranking, bending spirally etc. and binding with and including MS (annealed )wire not less than 0.9 mm dia, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5mm clear span, oils, steps, seismic and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or champhered angles and throating, complete all as specified and directed.

M & L for Reinforced cement concrete (Nominal Mix )1:1.5:3 Type A1 ( using 20mm graded stone aggregate) as in Beams, cantilevers, lintels over 1.5m span, complete all as specified and directed.

M&L vitrified ceramic tiles (premium quality) 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4, complete all as specified and directed.

M&L vitrified ceramic tiles (premium quality) 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in Skirting etc set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 , complete all as specified and directed.

M&L coloured glazed ceramic tiles (premium quality) in vertical surface 350x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or colour cement to match including rendering 10mm thick in cement mortar 1:3, complete all as specified and directed.

M&L joint free coloured non skid ceramic tiles (premium quality) 7 to 8 mm thick (square or rectangular) area of each tile exc 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 , complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed bed in cement mortar 1:3 over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

-Ditto- all as per item no 38 above, but in riser of steps, skirting, dado and pillars including rendering 10mm thick in cement mortar 1:3, complete all as specified and directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening, complete all as specified and directed.

Supply and fix Factory made solid PVC moulded door shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply and fixing in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc.overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Supply and fixing 32mm Waste fittings, brass, chromium plated for glazed are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Supply and fixing in repairs 15 mm bore chromium plated bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and directed.

Supply and fixing and 2nd class hard wood plain solid straight chowkats and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Supply and fixing 35 mm thick flush shutter solid core construction with block board core and plywood face pannel commercial type on both faces, complete all as specified and directed.

Supply and fixing 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood with lock rail and panel of 12 mm thick veneered particle board or 9 mm thick B.W.P with commercial veneering on both faces. The size of rail and style as per IS 1003 (part-I) kiln seasoned and chemically pressure treated of any number of panel , complete all as specified and directed.

M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber framework or similar, complete all as specified and directed.

M&L for melamine polishing on surfaces of any description, width or girth including cleaning and preparing the surface, complete all as specified and directed.

Supply and fixing 2nd class hardwood fillet sectional area exc 13 sqcm nexc 25 sqcm bull nosed, splayed, chamfered, rounded on one edge or face, square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed.

M&L 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with 1st class HW beading as required, complete all as specified and directed.

M&L 12mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with 1st class HW beading as required, complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

M&L for 1.5 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

Supply and fixing for 75mm Butt hinges B-12, extruded brass, with mild steel hinge pin, bright polished and fixed, complete all as specified and directed.

Supply and fixing for 100mm Butt hinges B-12, extruded brass, with mild steel hinge pin, bright polished and fixed, complete all as specified and directed.

Supply and fixing 75mm Brass handles, cast type, polished bright handles for cabinet, complete all as specified and directed.

Supply and fixing for brass 2 lever locks, drawer, cabinet, grade I, size 50mm, complete all as specified and directed.

Supply and fixing for 150 mm extruded brass handles, fabricated type polished, complete all as specified and directed.

Supply and fixing for 250 mm Brass, sliding door bolt with sand die-cast brass hasp, staple and fixing bolt with rolled drawn brass bolls and fixed, complete all as specified and directed.

Supply and fixing in repairs for 250 mm Brass, sliding door bolt with sand die-cast brass hasp, staple and fixing bolt with rolled drawn brass balls and fixed, complete all as specified and directed.

Supply and fixing 250mm , aluminium sliding door bolt with hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

Supply and fixing for 150mm brass body and tongue with hard drawn steel spring floor door stopper fixed, complete all as specified and directed.

Supply and fixing 150 mm long brass barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing Anodized aluminium (powder coated) frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply and fixing aluminium (powder coated) door, window, ventilator shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, rubber neoprene packing. handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc, complete all as specified and directed.

Supply and fixing for mild steel Mortise lock, vertical type, size 100 mm 4 lever, complete all as specified and directed.

M&L for fixed in repairs Prelaminated particle board 12mm thick interior grade laminated both side with decorate choice lamination , fixed with screw to aluminium frame work, complete all as specified and directed.

Supply and fixing 5.5 mm thick tinted glass exc 0.50sqm in each pane fixed with necessary rubber gasket and aluminium beading complete all as specified and directed.

Supply and fixing aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL') , complete all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint

Supply and fixing aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's specifications, complete all as specified and directed. Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint

Supply and fixing GI powder coated frame work for seamless ceiling black lining of size 600mm x 600 mm comprising of hot deep galvanized powder coated perimeter angle 0.43 mm thick of size 24x24 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, main runner Tee section 0.4 mm thick with height 38 mm and cross Tee 0.3 mm thick with height 28 mm suspended from soffit at approx 1200 mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations, complete all as specified and directed. Note: (i) Ceiling boards shall be measured separately. ii) The grid system shall be as per specifications of make as specified and directed.

M&L for non-asbestos designer 4 mm thick fiber cement building boards of size 595x 595x 4mm fixed or laid/inserted to GI frame work with screws/clips as in ceiling laid flat or sloping, complete all as specified and directed. Note: - GI frame work will be measured and paid for separately.

M&L 10 to 12 mm thick froasted toughened glass fixed to door, window or as partition or any other location including brackets, supports , handles, lock, floor springs and other accessories as required, complete all as specified and directed.

Supply and fixing framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165, complete all as specified and directed.

Supply and fixing PVC connection 15mm size with PTMT nut of length 450 mm, complete all as specified and directed.

Supply and fixing grating dome 100mm dia of Chromium plated , complete all as specified and directed.

Supply and fixing PVC floor trap 75 mm dia , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius of 75mm bore, complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius of 110 mm bore, complete all as specified and directed.

Supply and fixing PVC (SWR) vent cowl of 110mm bore , complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore, complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore, complete all as specified and directed.

M&L for 40mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kgf/ cm² laid in trenches, complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint, complete all as specified and directed.

Supply and fixing for 150mm long aluminium handles, cast type, anodized, complete all as specified and directed.

Supply and fixing for 150mm long aluminium, anodized, barrel tower bolts of extruded section and fixed , complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet ( pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hanging device with flush pipe 32 mm dia, complete all as specified and directed.

Supply and fixing in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed.

Supply and fixing in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe and vitreous china pedestal, complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and 20 mm ball valve high presses of PTMT epoxy coated. Aluminum rod & high density plastic ball screwed for iron pipe and fixed (mm weight 210 gms) and including dismantling water tank and removing from site, complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 500 litres capacity hoisted and fixed in position and 20 mm ball valve high presses of PTMT epoxy coated. Aluminum rod & high density plastic ball screwed for iron pipe and fixed (mm weight 210 gms) and including dismantling water tank and removing from site, complete all as specified and directed.

Supply and fixing 3 mm thick figured glass pin headed type n.exc 0.50 sqm each pane and fixed with oil putty or as required etc, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of any description exc 10cm width or girth and applying two coat of weather shield paint (Apex) over coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of any description exc 10cm width or girth and applying two coat of weather shield paint (Apex) over coat of primer, complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint , complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer , complete all as specified and directed.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of Birla white care putty, complete all as specified and directed.

M & L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment on wall and preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint as primer, complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed.

M & L for Preparing surfaces plastered and apply two coats of cement base paint over a coat of primer, complete all as specified and directed.

Supply and fixing Harrison rails 20 mm, mild steel, chromium plated with fixing brackets, nobs, stops, rollers etc. , complete all as specified and directed.

M & L Plain Cement concrete in foundation in post 1:3:6 Type C2 (using 40mm graded stone aggregate), complete all as specified and directed.

Removing existing water proofing treatment on roof including screed bed and scrubbing down with water etc and removing the same beyond premises of MD land , complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of rubbish/debris MD land , complete all as specified and directed.

M/L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 , complete all as specified and directed.

M&L 25 mm (avg) thick cement concrete type B-0, 1:2:4 (using 12.5mm grade stone aggregate) finishing cement concrete surface even and smooth without using extra cement using water proofing liquid @ 200 ml/50 kg of cement, complete all as specified and directed. Note- Water proofing liquid will be measured & paid separately.

M&L for provision of water proofing treatment by using APP torch on mineral/slate finished membrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps resepectively all as per manufacturers instructions over and including rendering 10mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without extra cement , complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in ground floor not otherwise specifically provided for removal of rubbish/debris MD land , complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 types D-2 with (using 40mm graded stone aggregate) as in sub base , complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection , complete all as specified and directed.

M&L for 8.3mm thick laminated wooden flooring high density core grade AC4 (As per classification EN 13329) advance high density click system fixed over Expanded Poly Ethylene (EPE)-3mm cushioning complete all as specified and directed by manufacture instruction complete.

M&L for for POP board false ceiling multi level 12/12.5 mm thick fixed in galvanised grid work as required quantity as site with 25 mm long self drilling and tapping screw aving bhillips head with under end outer at 200 mm centre to centre, including finishing to joint of face board with specially formulated jointing compound including GI suspenders of 6mm thick and joints of ceiling board shall be finished with 48 mm wide fibre tape to provide seamless finish fibre tape to provide seamless finish fibre tape to provide eseam less finish etc complete all as specified and directed by Engr-in-Charge.

M&L for POP corners mouldings 150 mm girth with screw on walls etc , complete all as specified and directed by Eng-in-charge.

M&L for preparing POP false ceiling and applying two coat of Luster paint over a coat of primer as per recommended by manufacture etc , complete all as specified and directed by Eng-in-charge.

Supply and fixing in repairs Bowl for Coupled WC with UF soft close seat cover, Hinges, fixing accessories set and Accessories set, size 365X630X750mm, P Trap-180mm (Jaquar Cat No FNS-WHT-40751S) and cistern with cistern fittings for 40751P&S (Jaquar Cat No - FNS-WHT-40201) Jaquar or equivalent as specified in Makes.

Supply and fixing in repairs Vitreous china wash basin, size 500x420x190mm, Table top type fixed in granite or table , complete all as specified and directed. Make Jaquar(Cat No-FLS-WHT-40931) or equivalent as specified in Makes.

Supply and fixing Urinal Partition Curved/rectangular shaped urinal partition with froasted glass 8mm thick chrome finish , complete all as specified and directed. Make Jaquar(Cat No-JSE-CHR-810UC450X)/ or equivalent as specified in Makes.

Supply and fixing in repairs Single lever Tall boy with 155mm extension body fixed Spout without popup waste system with 600mm long Braided hoses, complete all as specified and directed. Make : Jaquar (Kubix Prime Cat No:KUP-35005 BPM)or equivalent as specified in Makes.

Supply and fixing in repairs 2 way bib cock with wall flange, complete all as specified and directed. Make : Jaquar (Kubix Prime Cat No:KUP-35041PM) or equivalent as specified in Makes.

Supply and fixing Angular Stop Cock with wall Flange, complete all as specified and directed. Make : Jaquar (Kubix Prime Cat No:KUP-35053PM) or equivalent as specified in Makes.

Supply and fixing Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook , complete all as specified and directed. Make : Jaquar (Cat No ALD-565) or equivalent as specified in Makes.

Supply and fixing Towel ring square fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Jaquar (AKP-35721P) or equivalent as specified in Makes.

Supply and fixing Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. Make Jaquar (AKP-35711PS) or equivalent as specified in Makes.

Supply and fixing Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws. Make Jaquar (ACN-1171N) or equivalent as specified in Makes.

Supply and fixing Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws Make Jaquar (ACN-1173) or equivalent as specified in Makes.

Supply and fixing Soap dish holder fixed to walls with chromium plated (CP) brass screws Make Jaquar (AKP-35731P) or equivalent as specified in Makes.

Supply and fixing Soap dispenser with glass bottle fixed to walls with chromium plated (CP) brass screws Make Jaquar (AKP-35735P) or equivalent as specified in Makes.

Supply and fixing Tumbler Holder fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed. Make Jaquar (AKP-35741P) or equivalent as specified in Makes.

Supply and fixing Toilet Roll holder fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed. Make Jaquar (AKR-35751P) or equivalent as specified in Makes.

Supply and fixing waste coupling 32mm size half Thread with 80mm height brass CP with long screwed shank and fly nut, flanged end, complete all as specified and directed. Make Jaquar (ALD-709) or equivalent as specified in Makes.

Supply and fixing urinal size 355x340x535mm Vitreous China urinals, back wall type complete including providing and fixing plugs, bedding urinal against wall securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed. Make : Jaquar (Urinal Cat No:URS-WHT-13261) or equivalent as specified in Makes.

M&L for pre- polished Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jams , pillars; cooking platforms and like over screed bed 20mm thick(1:3) including pointing in white cement with pigment to match with shade of granite including necessary notching, chamfering the edges, complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations, complete all as specified and directed.

M & L for Excavating over areas, n exc 1.5 m deep and getting out soft and loose soil , complete all as specified and directed.

Removing excavated material exc 1.50 Km n exc. 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmwith soft/ loose soil, complete all as specified and directed.

Removing excavated material nexc. 50 m and depositing where directed at a level n.exc 1.50m from staring level, complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L Plain Cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggeregate) in foundation, mass concrete and fillings sub base/ pavings, complete all as specified and directed.

M & L cement concrete 100mm thick type B- 1, 1:2:4 (using 20mm graded stone aggregate) in paving concrete surface even and fair cement, complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade" B", complete all as specified and directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade" B" , complete all as specified and directed.

M & L for 50mm thick Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation, complete all as specified and directed.

M & L for Refixing of Machine pressed precast concrete interlocking paver block (except tiles) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-25 Grade with Grey cement and pigment, complete all as specified and directed.

M & L of Machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey cement and pigment, complete all as specified and directed.

M & L for cement concrete type C1 1:3:6 ( using 20mm graded stone aggregate) in coping, complete all as specified and directed.

M & L for chequered cement concrete tiles colour glossy finished rubber pressed 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6, complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

Dismantling fencing wire mesh, any type, complete all as specified and directed.

Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil, complete all as specified and directed.

M & L for Reinforced cement concrete (design mix) in M-25 ( using 20mm graded stone aggregate) as in foundation including column footing plinth beams bases of column etc., complete all as specified and directed.

M & L for Reinforced cement concrete (design mix)in M-25 ( using 20mm graded stone aggregate) as in column, complete all as specified and directed.

M & L for Reinforced cement concrete (design mix)in M-25 ( using 20mm graded stone aggregate) as in Beams, cantilevers, lintels over 1.5m span, complete all as specified and directed.

Formwork to sides of rough finish surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finish surface, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, essummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for rough finish surface, complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and Fair for surfaces of Masonry, complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:0.5:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide paint , complete all as specified and directed.

Supply and fixing Providing precast cement concrete louvers and jallies ornamental type (design approved by Engr-in- Charge), 25mm thick (measured solid), including pillar in cement mortar 1:6 including , complete all as specified and directed.

Removing Building materials after dismantling etc., exceeding 1.5 Km but not exceeding 5.0 km and depositing where directed, load of tractor trolly (log book will be maintained by Engr-in-charge of each load), complete all as specified and directed by Engr-in-charge.

INTTERNAL ELECTRIFICATION Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes , complete all as specified and directed.

Taking down sheet metal enclosure,DB & MCBs main switch etc and making good disturbed surfaces to match with existing surfaces , complete all as specified and directed.

Taking down sub main wiring of any size/ capacity and making good disturbed surfaces to match with the existing surfaces , complete all as specified and directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch , complete all as specified and directed. PVC Conduit Make : Polycab, Modiplast, Superplast Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item Sl No 171 above but One ceiling/exhaust fan point controlled by oneway switch and regulator , complete all as specified and directed.

Ditto all as per item Sl No 171 above but One 3 pin 5 amp socket outlet point on the same board with other switches , complete all as specified and directed.

Ditto all as per item Sl No 171 above but One 3 pin 5 amps socket outlet point on independent board , complete all as specified and directed.

Ditto all as per item Sl No 171 above but One bell/buzzer point controlled by one bell push , complete all as specified and directed.

Ditto all as per item Sl No 171 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 16 amps power point , complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm , complete all as specified and directed. PVC Conduit Make : Polycab Supperplast, Finolex) Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same.

Ditto all as per item Sl No 177 but size :- 2x6.0 Sqmm with earth wire of 1x6.0 Sqmm , complete all as specified and directed.

Ditto all as per item Sl No 177 but size :- 2x10 Sqmm with earth wire of 1x10 Sqmm , complete all as specified and directed.

M&L for Telephone cable 6 pair cupper cable , complete all as specified and directed. Cable Make : Polycot, Havells, Finolex, Anchor, Legrand

S&F for Telephone socket modular type single pole one way suitable for modular socket boxes , complete all as specified and directed. Cable Make : Polycot, Havells, Finolex, Anchor, Legrand

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes , complete all as specified and directed.

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes , complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes , complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fix Two modular double pole switch 32 amp 250 volts AC , complete all as specified and directed. Make : Anchor/ Roma, Legrand, Crabtree

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes , complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fix ceiling rose surface type three terminals 5 amps, complete all as specified and directed.

S&F Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

S&F bell push switch modular type single pole one way 5 amp 240 volts , complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

S&F 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole , complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

S & F 18/20 Watt LED Tube light fittings complete with aluminium / plastic body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable , complete all as specified and directed. Make & Model:- Philips Astra Line 20W/ CG -LCTL-18/20W-CDL /Bajaj BCLSB 18 W/ Wpro/ Surya.

Supply and fix in repairs LED batten fittings 2' length including drivers having energy consumption, 9-11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired , complete all as specified and directed. Make & Model : Philips Slim line 9W, CG- LCTL-9/10WCDL, Surya SLE BT 10/ Bajaj BCLSB 10 W/ Wpro/ Surya.

Supply and fix in recessed mounted LED ceiling fitting 2"X2", 36/40 W rated voltage 240 V 50 Hz , complete all as specified and directed. Make; Wipro/ philips/ CG-LCTLRF2-36-CDL/ Bajaj BCTBLR 36 W LED

Supply and fix in recessed mounted LED spot/ POP ceiling light 12 W rated voltage 240 V 50 Hz , complete all as specified and directed. Make; Wipro/ philips/ CG-CDR-212-12-40-SL-NWH/ Bajaj BCTBLR 36 W LED

Supply and fix building security light LED 24/ 25 W with Lumen O/P 2000 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 20 mm dia light grade pipe 1.2 m bent two shape including FI clamps nut bolts etc with suitable size GI bracket, 40 mm dia pipe, complete all as specified and directed. Make: Philips BRP020, Luker LST24 WH,/ CG-LSTS-30-CDL /. Bajaj BCLST 30 W LED

S&F ceiling fan 1200 mm sweep, 230V 50Hz with clamp set , complete all as specified and directed. Make : Crompton/Bajaj/Orient/Havells

Taking down old serviceable ceiling fan from existing location and re fixing same location need to do servicing, oiling gracing, painting on existing location making good, complete all as specified and directed.

S & F Exhaust fan single phase,250/300 mm sweep, PVC body with bolts, nuts, washers and connected electrically , complete all as specified and directed. Make : Bajaj/ Havells/ CG/ Orient

Supply and fix sheet metal enclosure (VTPN DB) for 415 volts 4 way with 200 Amp with MCCB 63 Amp rated bus bar flush /surface mounting, double door , complete all as specified and directed. Make- Legrand/Hegger /L&T

Supply and fix sheet metal enclosure Triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting, double door , complete all as specified and directed. Make- Legrand/Hegger /L&T

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door , complete all as specified and directed. Make- Legrand/Hegger /L&T

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA , complete all as specified and directed. Make:-Legrand, L&T, Hegger

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA , complete all as specified and directed. Make:-Legrand, L&T, Hegger

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA , complete all as specified and directed. Make:-Legrand, L&T, Hegger

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

AIR COOLING DUCTING SYSTEM:- Supply and installation of GI, pre fabricated erected rectangular ducts, complete with MS flanges and bracing (as specified), necessary supports using thread rods (as directed ) and anchor bolts, air collars, vanes, splitters dampers duty painted of the ducts and as per specification for Air cooler areas: all sheets shall be supplied with Mfr Test Certificates 24SWG ,Galvanized iron sheet thickness 0.63, complete all as specified and directed by Eng-in-Charge.

THERMAL INSULATION: - Supply & installation of 9 mm thick Cross Link Polymer Insulation with Aluminum coating on external surface of ducting for purpose of heat insulation and resistance from direct sunlight, complete all as specified and directed by Eng-in-Charge.

ACOUSTIC INSULATION: - Supply & installation of 9 mm thick Polywool Acoustic insulation, directly to be stuck inside ducting for reduction of noise, complete all as specified and directed by Eng-in-Charge.

Supply & fabrication work for cooler stand, frame & duct with heavy support and installation of base frame of MS angle iron and flat iron of suitable size for Air cooler & water tank units complete with epoxy painting, vibration isolation pads, supports, ranges, ralling, brackets etc with coast of epoxy primer and 2 supports of black paint etc are required, complete all as specified and directed by Eng-in-Charge.

Model - Green Wind Capacity -18000CMH Model / Virgin grade Polypropylene Body with UV resistance/ model no : GW18AE1S / SINGLE SPEED COOLER/ 1.1KW,1400 RPM MOTOR / 10600 CFM free air delivery/ 7500 CFM after installation of 120mm thick honeycomb cellulose pads and PP shutters, complete all as specified and directed by Eng-in-Charge.

Supply installation, testing and commissioning of flexible water proof canvas Connection for mouth opening of Air cooler to S.A Duct, complete all as specified and directed by Eng-in-Charge.

SA Grills( aluminum powder coated with four way manual deflection with opening and closing damper , complete all as specified and directed by Eng-in-Charge.

Supply and fix 1 phase DOL starter for cooler 415 V,50Hz complete all as specified and directed.

Civil work including core cut, chiselling , cutting of wall celling and making it as original by covering to all duct opening with suitable scaffolding etc , complete all as specified and directed by Eng-in-Charge.

Supply and laying in trenches or fixing in walls / pole or poles or drawing through pipes XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy) with almunium conductor 1100 volts grade cross sectional area 10 sqmm 4 core including testing after laid and joined , complete all as specified and directed by Eng-in-Charge. Note: Excavation and earth work shall be measured and paid separately.

Excavation in trenches for laying of cables, poles and stay in nay type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed by Eng-in-Charge.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDEP) pipe for laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches, wall, floor , pole including bends, sockets and other connected accessories, complete all as specified and directed by Engineer- in -Charge.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDEP) pipe for laying of Electric cable of size 90mm outer diameter and 78 mm inner Diameter with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches, wall, floor , pole including bends, sockets and other connected accessories , complete all as specified and directed.

S&F GI tubing medium grade with all fittings to wall or laid in floors for 25 mm bores complete all as specified and directed.

S&F GI tubing medium grade with all fittings to wall or laid in floors for 20 mm bores complete all as specified and directed

Supply and fix Gun- metal globe or gate valves, with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm bore , complete all as specified and directed.

Supply and fix Gun- metal globe or gate valves, with iron wheel head ,screwed both ends for iron pipe and fixed of size 20 mm bore , complete all as specified and directed.

M&L for cutting existing steel tubing for alteration or additions of 25 mm dia complete with tee , complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks 2000 Ltrs (cylindrical vertical with closed top ) hoisted and fixed in position , complete all as specified and directed.

M & L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade laid in trenches passing through pipes/ducts including testing complete of following cross sectional area and size 70 sqmm 3.5 core , complete all as specified and directed.

M & L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade laid in trenches passing through pipes/ducts including testing complete of following cross sectional area and size 50 sqmm 3.5 core , complete all as specified and directed.

M & L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade laid in trenches passing through pipes/ducts including testing complete of following cross sectional area and size 16 sqmm 4 core , complete all as specified and directed.

S&F LED Bollard fitting inverted pyramid tripod with soft 360 degree light and IP 65 protection including drivers, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size of 230 V 50 Hz from fitting to junction box fitted to PCC structure , complete all as specified and directed. Make; Bajaj; Cat No BOS 600W 9 W LED / Philips BCP 400 LED 05 PCW PSU GRS1./ CG LBLA2-0CDL ./ Wipro/ Surya.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copping of poles, including necessary form work weathering slightly or chamfered angles, throuting exposed surfaces finished even and fair , complete all as specified and directed.

S&F in repair LED post top made in cast aluminum spigot housing with decorative open acrylic diffuser and IP 65 protection including driver with 3 core copper wire till connector , complete all as specified and directed. Make:- Wipro Cat No LP02-501-XXX-57-XX / Phillips / Bajaj./CG-LPTO 1-45CDL/ Surya

Supply and fixing thermoplastic cable junction boxes IP 55/IP65 with metric knockout for cable entry of size 200 x 160 x98 mm fixing on pole with 30 x 5 mm MS clamps, nut bolts, washers, terminal block and glands suitable for 16 Sq mm core cable including 6 amps MCB SP , complete all as specified and directed. Make:- HENSEL/ Neptune,/ Sintex

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 3,57,232.00/- ]

Quality Builders

M/s Dara Constructions, Pulgaon

chronicle enterprises

Meet Road Lines

M/s JAYPEE ENTERPRISES

Bidder Name

Meet Road Lines

M/s Shrangi Rishi Construction

chronicle enterprises

Quality Builders

M/s Dara Constructions, Pulgaon

M/s JAYPEE ENTERPRISES