Construction of Mukhya Mantri Lok Bhawan at

Amount

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including all taxes,GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 320 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto floor all levels as per the directions of the Engineer-in-charge including all taxes, GST,carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 320 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads and lifts and other incidentals.

Providing and laying mechanically mixed and vibrated reinforced cement concrete M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20 N/mm square (twenty newton per square millimetre) with cement contents not less than 320 Kg/ Cubic metre and curing complete including form work in moulding as in cornices, window sills etc. upto floor all level as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals.

Providing and laying cement concrete M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 320 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) reinforced concrete chajjas upto any thickness and upto floor all level including finishing the exposed surfaces with cement mortor 1:3 ( One cement isto three sand) to give a smooth and even surface centering /form work and curing complet excluding the cost of reinforcement within all leads and lifts and as per the directionof the Engineer-in-charge and other incidentals.

Providing tor steel reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry using second class common brunt building brick with hoop iron of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & fixing 40 mm ( forty millimetre) thick second class deodar wood shutter for door with infill pannel of 12 mm thick ( twelve millimetre) phenol bonded pre-laminated board (both side) particle board ISI marked No. IS-12823 including ( below middle rail) or its eqivalent pannel above middle rail sahll be of 5 mm ( five milimetre) thick glass with black enamle iron butt hinges with necessary screws complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (thirty millimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (ninteen) gauge thickness and size of 19mm x19mm (ninteen into ninteen millimetre) for styles and 15mmx15mm(fifteen into fifteen millimetre) for top and bottom rails, (code No. 9.128 of RAJSHRI )M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70mm (seventy millimetre) width out of which 50mm( fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tappred in 45 (forty five millimetre) degree angle on either side forming style and 5mm(five millimetre) thick, 95mm (ninety five millimetre) wide, PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 (forty five ) degree on the inner side to form top and bottom rail and 115mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style and rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (one hundred into fifty into one point nine zero millimetre) size with necessary screws etc complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 250x16 mm (two hundred fifty into sixteen millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing bison board ceiling 595x595mm( five hundreds ninety five into five hundred ninety five millimetre) cascade in powder coated G.I. frame work complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing Uni-stone 12mm (twelve millimetre) cladding on RCC surface side as on faces of Arch masonary walls etcetera on 12mm (twelve millimetre) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etcetera complete including as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA / SAIL/ RELIANCE/ ZINDAL STEEL including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing valleys 90cm (ninety centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty microns) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trusses purlins in building as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm (fifty into forty seven millimetre) with a wall thickness of 5mm (five millimetre) made out of extruded 5mm(five millimetre) rigid PVC foam sheet heat bend and mitred at corners and jointed with 2 Nos. (two numbers) of 150mm (one hundred fifty millimetre) long brackets of 15mmx15mm (fifteen into fifteen millimetre) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (ninteen into ninteen millimetre) M.S. square tube of 19 (ninteen) gauge of RAJSHRI ( code No. 16.24) EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. screws 100 (one hundred) long with wooden or rawl plugs emedded in masonry complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing Fixed Steel window steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm ( fifteen into ten into ten centimetre) size of 1:3:6( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty as per the direction of Engineer-in-Charge.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and top hung ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm ( fifteen into ten into ten centimetre) size of 1:3:6( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty as per the direction of Engineer-in-Charge.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing side hung steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point one five millimetre) lugs 10 cm ( ten c enetimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm ( fifteen into ten into ten centimetre) size of 1:3:6( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty as per the direction of Engineer-in-Charge. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing steel windows side hung wire gauge of standard rolled steel sections joints mitred and welded with mechanical means to relevent ISI standard specification frames and in M.S. Tee section 25X15X3mm (twenty five millimetre into fifteen millimetre into three millimetre) including glazing clips or pins, , M.S. wire mesh 4 designation 85 (eighty five) SWG and M.S. fitting as required including providing and fixing of projecting, hinges, tower bolts, handles, hooks and eyes, presty, locking arrangment spring catch etcetra and providing and fixing wire mesh fly proof including fixing with special metal sesh putty of approved make complete including applying a priming coat of red lead paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) any thickness in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-chief and other incidentals.

Providing and fixing plain sheet with 19 x 19 mm (nineteen into nineteen millimetre) hollow aquare bar M.S. BP Sheet 1.66mm to 2mm ( One point six six to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast)finolex 110mm (one hundred millimetre) dia PVC plain bend for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamled paint other than white including all taxes, carriage of materials, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

15mm (Fifteen millimetre) cement plaster in single coat on fair side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Rajeshwar Singh

Kalim Mohd